Parts List/Tune Up Info

2AL9D-FIP16PLUS_Tune Up Procedure
Measurement Procedure:
1. Set the device to operational voltage and on a predefined channel in a special test mode.
2. The actual output power is measured at several power levels.
3. The gain factors of each individual device are adjusted until the target value is met. The
appropriate gain control settings for each output power level are stored in each device
individually (for each power level). The user has no possibility to change these settings
later on.
4. The maximum gains of each individual device are adjusted and measured until the target
value is met. The production target power with tolerance compiles with the maximum
power in test report.
Rated RF power output:
Mode
2.4G WLAN(AVG)
802.11b
20±1dBm
802.11g
20±1dBm
802.11n(HT 20)
18.5±1dBm
802.11n(HT 40)
19±1dBm
Mode
5.2G WLAN(AVG)
802.11a
11±1dBm
802.11 n-HT20
8.5±1dBm
802.11 n-HT40
9±1dBm
802.11 ac-VHT20
8.5±1dBm
802.11 ac-VHT40
8.5±1dBm
802.11 ac-VHT80
7.5±1dBm
Mode
5.8G WLAN(AVG)
Channel
Low
Midle
High
802.11a
9±1dBm
9.5±1dBm
8±1dBm
802.11 n-HT20
7±1dBm
7.5±1dBm
6±1dBm
802.11 n-HT40
7.5±1dBm
/
7±1dBm
802.11 ac-VHT20
7±1dBm
6.5±1dBm
5±1dBm
802.11 ac-VHT40
7.5±1dBm
/
7±1dBm
802.11 ac-VHT80
/
/
7±1dBm