Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 The G801 High Speed Router User’s Guide V1.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 Table of Contents 1 Preface ........................................................................................................................................................................................................................................................................................................................ 4 2 LED Indicators and Connectors .............................................................
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.3.3 DMZ/Port Forward ........................................................................................................................................................................................................................................................................... 27 5.3.4 MAC Clone ...............................................................................................................................
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 1 Preface Thank you for choosing G801 wireless router with VoIP. This product will allow you to make ATA call using your broadband connection, and provides Wi-Fi router function. This manual provides basic information on how to install and connect G801 wireless router with VoIP to the Internet. It also includes features and functions of wireless router with VoIP components, and how to use it correctly.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 2 LED Indicators and Connectors Before you use the high speed router, please get acquainted with the LED indicators and connectors first. 2.1 LED Indicators Front Panel LED PHONE WLAN LAN 1/2/3/4 Status Explanation Blinking(Green) Not registered. On (Green) Registered On (Green) Wireless access point is ready. Blinking(Green) It will blink while wireless traffic goes through.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 LAN (1/2/3/4) Connectors for local networked devices. 2.2 Hardware Installation Before starting to configure the router, you have to connect your devices correctly. Step 1.Connect Line port to land line jack with a RJ-11 cable. Step 2.Connect the WAN port to a modem or switch or router or Internet with an Ethernet cable. Step 3.Connect one port of 4 LAN ports to your computer with a RJ-45 cable.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 3 Voice Prompt In any circumstance, pressing the following command to enter relevant function. The following table lists command, and description. Voice Menu Setting Options Operation code 1 1 2 3 4 5 Contents Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “1”, and G801 report the current WAN port connection type Step 3.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 6 7 8 9 0 Step 1.Pick up phone and press “****” to start IVR Step 2.Choose “6”, and G801 report “Factory Reset” Step 3.Prompt "Please enter password", the method of inputting password is the same as operation 1. If you want to quit by the wayside, press “*”. Step 4.Prompt “operation successful” if password is right and then G801 will be factory setting. Step 5.Press “7” reboot to make changes effective. Step 1.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 #(pound) key to indicate that you have finish entering the IP address or subnet mask When assigning IP address in Static IP mode, setting IP address, subnet mask and default gateway is a must. If in DHCP mode, please make sure that DHCP SERVER is available in your existing broadband connection to which WAN port of G801 is connected. The default LAN port IP address of G801 is 192.168.1.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 4 Configuring Basic Settings 4.1 Two-Level Management This chapter explains how to setup a password for an administrator/root user and how to adjust basic/advanced settings for accessing Internet successfully. G801 supports two-level management: administrator and user. For administrator mode operation, please type “admin/admin” on Username/Password and click Login button to configuration.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 Shooting” for detecting and solving your problem. 4. The web page can be logged out after 5 minutes without any operation. 4.2.2 From WAN port 1. Make sure your PC can connect to the router’s WAN port correctly. 2. Getting the IP addresses of WAN port using Voice prompt. 3. Open a web browser on your PC and type http://the IP address of WAN port. The following window will be open to ask for username and password. 4.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 N o. Name Description 1 Navigation bar Click navigation bar, many sub-navigation bar will appear in the place 2 2 Title Click sub-navigation bar to choose one configuration page 3 Parameter To configuration the parameters Every time making some changes, user should press this button to confirm the changes. After pressing the button, the red will appear to notice rebooting. To cancel the changes.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 4.5 Setting up the Internet Connection Open the Network/WAN webpage as shown below; please select the appropriate IP Mode according to the information from your ISP. There are three types offered in this page, which are Static, DHCP and PPPoE. 4.5.1 Static IP You will receive a fixed public IP address or a public subnet, namely multiple public IP addresses from your DSL or Cable ISP service providers.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 In most cases, a Cable service provider will offer a fixed public IP, while a DSL service provider will offer a public subnet. If you have a public subnet, you could assign an IP address to the WAN interface.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 Secondary DNS Type in secondary IP address for necessity in the Server future 4.5.3 PPPoE PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a common broadband medium, such as a single DSL line, wireless device or cable modem. All the users over the Ethernet can share a common connection.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 4.6 Setting up the Wireless Connection To set up the wireless connection, please skip the following steps. 4.6.1 Enable Wireless and Setting SSID Open Wireless/Basic webpage as shown below Click the button to enable or disable wireless. Radio On/Off Press to disable wireless. Press to enable wireless. Network Mode Choose one network mode from the drop down list.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 Select an appropriate encryption mode to improve the security and privacy of your wireless data Security Mode packets. Each encryption mode will bring out different web page and ask you to offer additional configuration. 4.7 Register 4.7.1 Get the Accounts G801 have a FXS port, you can use it to make SIP call, and before registering, you should get the SIP account from you administrator or provider. 4.7.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 4.8 Make Call 4.8.1 Calling phone or extension numbers To make a phone or extension number call: a) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) have public IP addresses, or b) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) are on the same LAN using private or public IP addresses, or c) Both ATA and the other VoIP device (i.e.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 b) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) are on the same LAN using private or public IP addresses, or c) Both ATA and the other VoIP device (i.e., another ATA or other SIP products) can be connected through a router using public or private IP addresses.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5 Web Configuration This chapter will guide users to execute advanced (full) configuration through admin mode operation. 5.1 Login Step 1.Connect the LAN port of the router to your PC Step 2.Open a web browser on your PC and type in http://192.168.1.1. The window will ask for typing username and password. And you can choose language, too.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.2 Status This webpage shows the status information about product information, Network and system. It shows the basic information of the product, such as product name, serial number, MAC address, hardware version and software version. It also shows the information of Link Status, WAN Port Status, and LAN Port Status. And it shows the current time and the running time of the product.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.3 Network&Security You can configuration the WAN port, LAN port, DDNS, Multi WAN,DMZ, MAC Clone,Port Forward and so on in these two bars. 5.3.1 WAN This page allows you to set WAN configuration with different modes. Use the Connection Type drop down list to choose one WAN mode and then the corresponding page will be displayed.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 DHCP: It is not necessary for you to type any IP address manually. Simply choose this type and the system will obtain the IP address automatically from DHCP server. Set the DNS Mode from Auto and Manual, If user choose manual, you should fill the DNS Mode primary DNS address and Secondary DNS address into Primary DNS Address and Secondary DNS Address.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 Set the DNS Mode from Auto and Manual, If user choose manual, you should fill the primary DNS DNS Mode address and Secondary DNS address into Primary DNS Address and Secondary DNS Address.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 Type in local IP address for connecting to a local private Local IP Address network (Default: 192.168.1.1) Type in an address code that determines the size of the Local Subnet Mask network. (Default: 255.255.255.0/ 24) If or not enable DHCP server. Local DHCP Server DHCP Server: Router has a built-in DHCP server that assigns private IP address to each local host. DHCP stands for Dynamic Host Configuration Protocol.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 You must specify a DNS server IP address here because your ISP should provide you with usually more than one DNS Primary DNS Server. If your ISP does not provide it, the router will automatically apply default DNS Server IP address: 202.96.134.33 to this field. You must specify a DNS server IP address here because your ISP should provide you with usually more than one DNS Server.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.3.4 MAC Clone Some ISPs will require you to register your MAC address. If you do not wish to re-register your MAC address, you can have the router clone the MAC address that is registered with your ISP. To use the Clone Address button, the computer viewing the Web-base utility screen will have the MAC address automatically entered in the Clone WAN MAC field. Step 1.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.3.5 Multi WAN 5.4 Wireless 5.4.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 Select Radio On to enable the wireless, select Radio Off Radio On/Off to disable wireless. Network Mode Choose one network mode from the five types. The name of the wireless name, it can be any text SSID numbers or various special characters. The default SSID is "VWRT510131028". Multiple User can set multiple SSID. SSID1-3 broadcast(SSI If or not enable SSID broadcast. D) 5.4.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 Select an appropriate encryption mode to improve the security and privacy of your wireless data packets. Security Mode Each encryption mode will bring out different web page and ask you to offer additional configuration. 5.4.3 WMM 5.4.4 WPS WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection between wireless station and wireless access point (vigor router) with the encryption of WPA and WPA2.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 client and router automatically. WPS If or not enable WPS. Press the button to apply. 5.4.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.4.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.5 SIP Account 5.5.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.5.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.5.3 VOIP QoS Setting 5.6 Phone 5.6.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.6.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.6.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.6.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.7 Security 5.7.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.7.2 DMZ 5.7.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.7.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.7.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.8 Administration 5.8.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.8.2 Firmware Upgrade 1) Choose upgrade file type from Image File and Dial Rule 2) Press 3) Press to browser file. to start upgrading. 5.8.3 Provision Please refer to the provision user manual to test provision.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.8.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.8.5 TR069 5.9 System Log If you enable the system log in Status/syslog webpage, you can view the system log in this webpage.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 5.10 Logout Press the logout button to logout, and then the login window will appear. 5.11 Reboot Press the Reboot button to reboot G801.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 6 Trouble shooting of the guide 6.1 Setting your PC gets IP automatically Following are the process of setting your PC gets IP automatically Step 1.Click the “begin” Step 2.Select “control panel”, then double click “network connections” in the “control panel” Step 3.Right clicks the “network connection” that your PC uses, select “attribute” and you can see the interface as picture 1: Step 4.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 6.2 Can not connect to the configuration Website Solution: Check if the Ethernet cable is properly connected, then Check if the URL is right wrote, the format of URL is: http:// the IP address: 8080, 8080 must be added, then Check if the version of IE is IE8, or use other browser such as Firefox or Mozilla, then Contact your administrator, supplier, or ITSP for more information or assistance. 6.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 7 Statement FCC Radiation Exposure Statement FlyingVoice Technology Ltd. Declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
Copy Right 2013 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED V1.3 This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.