User Manual FIP12/FIP12W V1.0 V1.
Revision Record： Version Date Author Firmware Version V1.0 2016-01-08 Sherry V1.0 Applicability V1.
Table of Contents 1 Introduction ....................................................................................................................................................................................................................................................... 7 1.1 Thanks for Purchasing FIP12/FIP12W ............................................................................................................................................................................................
5.5 Muting a Call.......................................................................................................................................................................................................................... Error! Bookmark not defined. 5.6 Placing a Call on Hold .........................................................................................................................................................................................................................
7.4.3 7.5 Syslog ................................................................................................................................................................................................................................................................................................... 42 Network .............................................................................................................................................................................................
7.8 Administration ................................................................................................................................................................................................................................................................... 69 7.8.1 8 Management ................................................................................................................................................................................................................
1 Introduction 1.1 Thanks for Purchasing FIP12/FIP12W Thank you for purchasing FIP12/FIP12W. The FIP12/FIP12W which has 4 lines is a full-featured VoIP (Voice over Internet Protocol) phone that provides voice communication over an IP network. This phone functions not only much like a traditional phone, allowing to place and receive calls and enjoy other features that traditional phone has, but also it own many data services which you could not expect from traditional telephone.
2 Installing 2.1 Assembling the Phone and Connecting to the Network 1) Plug one end of the coiled phone cord into the left side of the phone base. 2) Plug the other end of the handset cord into the jack at the bottom of the handset. 3) If you are using an external power source, push the power cord into the power supply, and plug the power supply into the phone base unit. Note: Use only the power supply that came with the phone.
Note: If the phone does not provide this screen, re-confirm installation and connections. If these are incorrect, try unplugging the phone and plugging it back in again. If you still don’t see the display, then contact your Phone Administrator or service provider. 2.4 Connect to the Internet You can connect the FIP12/FIP12W to the Internet via wired and via wireless. 2.4.1 Via Wired Step 1.Check FIP12/FIP12W have powered on correctly. Step 2.
Step 2.Highlight one Wi-Fi and the words will get larger, following is one example: Step 3.Press the button to connect to the E3CALL_SZ. Step 4.
Step 5.If the AP have connected, then connection status will change like following picture and the icon of wireless will display linked.
3 Get Familiar with FIP12/FIP12W 3.1 Front Panel No. Front Panel 1 Picture 1 FLYINGVOICE Part Name Description of function Handset top cradle For the placement of handset (Receiver end) Hook switch For hang-up and hang-off of handset Cradle latch To prevent the handset from dropping when it is wall-mounted.
Soft keys These keys are used as soft keys. These can be used for item selection or control on the LCD screen. The softkey’ function depends on their corresponding content displayed on the LCD at that time. 5 Menu Press it to access to menu items: such as phonebook, multi-functional key, and call history and so on.
3.2 Rear Panel Part Name Rear Panel Description of function Line Connect to PSTN USB Use the USB for storage DC 5V Power port PC Connects to a PC. Internet Connects to the Ethernet switch, router or Internet. 3.3 LEDs Indicator Color Status Description ON The phone is in the initialization process. Blink(300 ms) Telephone is ringing (any line). LED The phone receives the short message or voice Blink (1 second) information.
To display the current date. Date Date format is mm/dd To display the current time. Time Time format is mm:ss (A or P) Phone Numbers To display the phone number of lines. To display the status of lines. Lines Softkey Function The icon means unregistered. The icon mean registered. To display the current softkey function. You can use the softkey button to highlight the item displayed on the LCD screen and then configuration.
4 Menu User can use MENU, soft key and button to browse, modify and configuration the phonebook, multi-functional keys, network, accounts, factory default and so on. 4.1 Items The table below lists Menu items which FIP12/FIP12W included: Main menu Menu Items Submenu Items Explanation (LCD display) (LCD display) (LCD display) User can view, add, edit, and delete phonebook using the five softkey. User can also make call, and send text message directly using the five 1Phonebook 1.1NewEntry softkey.
7.1Bell Type1 7.2Bell Type2 7.3Bell Type3 7.4Bell Type4 7.5Bell Type5 7Ring Tone Choose the ring tone from Bell Type1- Bell Type15. 7.6Bell Type6 7.7Bell Type7 7.8Bell Type8 7.9Bell Type9 7.1Bell Type10 8Volume Setting To turn up or turn down volume. 9Accounts 9.1.1Account Enable To enable/disable line1. 9.1.2Password To set password of line1. 9.1.3Account To set account of line1. 9.1.4Display Name To set display name of line1. 9.1.5Phone Number To set the phone number of line1. 9.
9.1.10Outbound To set the outbound proxy port of line1. Proxy Port 9.2Line 2 Same to 9.1 10.1CFWD To set the destination phone number of CFWD AllNumber AllNumber 10.2CFWD Busy To set the destination phone number of CFWD Busy Number Number 10Call Forward 10.3CFWD No To set the destination phone number of CFWD No AnsNumber AnsNumber 10.4CFWD No To set the destination phone number of CFWD No AnsDelay AnsDelay 11.1Time(H:m:s) 11Time/Date 11.2Date(m/d/y) 12.1.1MWI Enable 12.
13.3CurrentNetmask To view the Current Netmask, or to change the Current Netmask. 13.4CurrentGateway To view the Current Gateway, or to change the Current Gateway. 13.5DNS1 To view the DNS1, or to change the DNS1. 13.6DNS2 To view the DNS2, or to change the DNS2. 13.7Enable WAN To enable or disable user login webpage from Internet port. Login 13.8Web Port To view the Web Port, or to change the Web Port. 13.9SIP QoS To view the SIP QoS, or to change the SIP QoS. 13.
Connection 15.1Product Name 15.2Software Version To view the current information of Product Name, Software Version, 15.3Hardware Hardware Version and MAC Address. 15Product INFO Version 15.4MAC Address 16.1Account1Status 16Status To view the current information about the status of account1/2/3/4/5. 16.2Account2Status 17Reboot To reboot FIP12/FIP12W. 18Factory Default To set FIP12/FIP12W factory default. To reset password. 19Set Password The password of LCD is same as the one of Webpage.
4.2 How to configuration from Menu 1) When the phone is on-hook, press the button to enter Main menu. 2) Use the Numeric Keypad to input the digit or character 3) Press the en softkey button to change the input method between digit, capital letter and small letter. 4) Use the up and down softkey button to scroll up and scroll down. Configuration the item or sub-item according to the prompt. 5) Press the ok softkey button to confirm. 6) Press the save softkey button to save changes.
5 Using Basic Phone Function 5.1 Using the Handset/ Speakerphone/ Headset 5.1.1 Using the Handset To place and answer calls using the handset, simply lift the handset. 5.1.2 Using the Speakerphone To place and answer calls using the speaker, press the speaker button. The green light behind the button will illuminate. 5.2 Making Telephone Call 5.2.1 Place a Call You can place a call by: Step 1.
Below are the steps to add a phonebook in menu, User can also add phonebooks from you PC using FIP12/FIP12W Web Interface, Step 1.Press button access to the menu items, and use the softkey button to choose 1.Phonebook Step 2.Add one phonebook according to the prompt, press the en softkey button to change the input method between digit, capital letter and small letter. Using phonebook: Press button to access to the menu items, and use the softkey button to choose 1.
Step 2.Add one dial plan, user can refer to 7.6.3 Dial Plan Using dial plan to make call: Dial the phone number according to one dial plan. 5.2.7 Using Delayed hotline Add the delayed hotline from SIP Account/Account1/2 webpage, User column, below is one example: Step 1.Open SIP Account/Account1/2 webpage, User column Step 2.Fill in the delayed hotline number, user can also add the delayed time. Example 1: set the delayed hotline number is 111.
5.3 Adjusting Call Volume From menu: Step 1.Press button, and then choose volume. Step 2.Press up and down button to turn up or turn down volume. Using multi-functional key: Step 1.Choose two multi-functional key (assuming the two multi-functional keys are Exp Key 1 and Exp Key 2), and configuration as follows: Step 2.Press Save Settings to save changes and user can see the corresponding LED is solid green. Step 3.
Step 2.Refer to the 7.6.4.1 Black List to add blacklist. 5.5 Placing a Call on Hold When FIP12/FIP12W is during one active call: Step 1.Pressing the button to put the active call on hold, then you will hear a dial tone, the remote party will hear the hold music Step 2.User can input the phone number to make call Step 3.Pressing the button again to release the previously Hold state and resume the bi-directional media. 5.6 Three Way Conference Calls Step 1.
the call with the second person, and you can press the button to continue the first call. 5.8 Unattended Transfer You can transfer an active call to a third party without announcement. Step 1.To initiate an unattended (blind) transfer; press the XFER softkey button during an active call. The first call is placed on hold and you will hear a dial tone. Step 2.
5.10 Call Waiting Before using call waiting, you should enable it firstly, and default is enabling. During an active call: Step 1.If call waiting is enabled, call waiting alerts you with ringing if there is another call is incoming, and the associate line button will change to red blinking, press the line key of the second call to answer the second call with the first call holding, pressing the line button of the first call to back to the first call with the second call holding. Step 2.
Step 2.Press the softkey button under dial to return the missed call. • If the LCD screen does not show a missed call, you can return a call from the Missed Call list: Step 1.Press the button. Step 2.Then selects 3Call History. Step 3.Then selects Missed Calls. Step 4.Choose the call you want to return and press Dial. To view a list of all missed calls: • If the LCD screen shows a missed call, press the softkey button under miss to view a list of missed calls.
Press the ok softkey button to access to configuration the next receiver’s phone number; You can select one number in phonebook by pressing the pbook softkey button. If user has configuration the phone numbers which you want to send, press the ok softkey button twice to access to the next item (Sender number). Step 5.Set Sender phone number, default is line1’s phone number. Step 6.Press the select softkey button to start sending message. 5.13.2 Reading Message Step 1.
6 Using Advanced Phone Functions 6.1 Speed Dials Creating Speed Dials: Following are the steps to creating speed dials in webpage; you can also creating it from LCD Menu. Step 1.Access to web, and then open Phone/Multi-Functional Key webpage Step 2.Then configures one Exp key to speed dial, and then choose the line and fill in the phone number. The following picture is a setting example: Step 3.Press button to save changes and then press button to make changes effective. Using Speed Dials: Step 1.
his phone line: Green: Line is idle. Red (steady): Line is active or in use. Red (blinking): Line is ringing. In addition, if you have configured the pickup code in BLF, you can press the same multi-functional button to pick up a ringing call at his extension. The example below describes the steps to configuration the pickup in BLF from Webpage, user can also configuration from MENU. Configure the pickup code in BLF: Step 1.Access to web, and then open Phone/Multi-Functional Key webpage Step 2.
Step 3.Press button to save changes and then press button to make changes effective. Using shortcut Key: Press the Exp Key 1, then the LCD will display the phonebook item immediately, and user can configuration it, the steps are same as configuration from menu. Press the next Exp Keys, and the LCD will display the corresponding item immediately, and user can also configuration it. 6.4 Pickup The function of pickup is similar to the speed dial.
Press the Exp Key 3 button (the configured multi-functional key) to ring 010235689 quickly. 6.5 Call Park Call Park is a feature of some telephone systems that allows a person to put a call on hold at one telephone set and continue the conversation from any other telephone set. During an active call, pressing one preprogrammed multi-functional key button to transfer the current telephone conversation to an unused extension number and immediately puts the conversation on hold.
Step 4.Press button to save changes and then press button to make changes effective. Using Call Park: Step 1.During an active call (assuming party 1(FIP12/FIP12W)’s phone number is 6221, party 2’s phone number is 111) Step 2.Party 1 press the Exp Key 6 button (the configured multi-functional key) to park the current conversation and listen the voice prompt patiently, Step 3.Party 3 dialing 71 using another phone to retrieve the call with party 2. 6.
Step 3.Press button to save changes, then the notice will appear, press button to make changes effective. 6.6.2 Using MSG To access you voice mail box, press the MSG button. Then user can listen to the new voice mail or old voice mail or reply voice mail according to the voice prompt. 6.7 Changing the LCD Screen Contrast Step 1.Press the button, scroll to 19LCD Contrast, and press the Select softkey button to access. Step 2.Use the up and down buttons to adjust the screen contrast.
parameters, you can follow these steps: Step 1.Press the button, select Time/Date. Step 2.Choose date to adjust date; enter the date in the following format: mm/dd/yy. Step 3.Choose time to adjust time; enter the time in the following format: hh/mm/ss. Step 4.Press the ok softkey button to save the changes. 6.10 Rebooting Your Phone This setting is to configure and troubleshoot the network.
Step 3.Waiting about 5 seconds, the red notice will appear, and then press Reboot button to reboot FIP12/FIP12W. Note: If you choose factory default, you will return the phone to the original factory settings and will erase all current settings, including the directory and call logs. 7 CONFIGURATION 7.1 Web-based Configuration This section will show you how to configure your FIP12/FIP12W using the web-based configuration interface.
Step 3.Enter “http://Internet IP Address:8080” in the address field of the browser. Step 4.Type “admin” or “user” for the User Name, click on the Login button to access the configuration page There are two levels of web configuration: one “user” ID level that can view just some portion in the web, and the other “admin” ID level that can view and configure all settings in the web-based configuration interface. To use “admin” ID for login, please contact your administrator, supplier or service provider. 7.
should press the button to confirm and save the changes. After pressing the button, the red will appear to notice user to reboot. To cancel the changes.
7.4 Status 7.4.1 Basic This webpage displays the basic status of your FIP12/FIP12W, including the information about product information, SIP account status, network status, VPN status, PC port status and system status. Click Refresh button to refresh the status.
7.4.2 LAN Host This page displays the status about the cliend which connected to the FIP12/FIP12W’s LAN port 7.4.3 Syslog This page displays the log of system. User can press Clear button to clear all information, Click Refresh button to refresh syslog. Click Save button to save syslog.
7.5 Network 7.5.1 WAN User can configuration the parameters of Internet Port, PC port and Network Address Server Settings (DHCP). The details are as follows: 7.5.1.1 Internet Port (WAN) Static: In static mode, user should fill in the values of IP Address, Subnet Mask, Default Gateway, Primary DNS and Second DNS got from your administration. Webpage Field Name FLYINGVOICE Description Internet Connection Type Choose Static IP.
DHCP: In DHCP mode, IP phone is a DHCP client. IP phone will get the IP Address, Subnet Mask and Default Gateway from the DHCP server. Webpage Field Name Internet Connection Type DNS type Description Choose Automatic Configuration-DHCP. Choose DNS type from Manual and Automatic In Manual: user should set the Primary DNS and Second DNS manually. In Automatic: IP Phone will get the Primary DNS and Second DNS from DHCP Server automatically.
Connection Type PPPoE Account Fill in the PPPoE account which get from Internet Service Provider PPPoE Password Fill in the PPPoE account get from Internet Service Provider PPPoE Auto-Dial If or not enable PPPoE Auto-Dial. DNS Type Choose DNS type from Manual and Automatic In Manual: user should set the Primary DNS and Second DNS manually. In Automatic: IP Phone will get the Primary DNS and Second DNS from DHCP Server automatically. Primary DNS The primary DNS of Internet port.
Field Name Local IP Address Description Enter the IP address of the router on the local area network, all the IP addresses of the computers which are in the router’s LAN must be in the same network segment with this address, and the default gateway of the computers must be this IP address. (The default is 192.168.1.1) Local Subnet Enter the subnet mask to determine the size of the network (default is 255.255.255.
7.5.3 MAC Clone Webpage Description MAC is the hardware address of network equipment. Sometimes, network providers may bind network account with the network equipment’s MAC address. So you may not pass the provider’s authentication when you use a new FIP12/FIP12W. In this case, you can use MAC Clone to copy your PC’s MAC address to FIP12/FIP12W’s Internet port.
Webpage Field Name Description VPN Enable If or not enable VPN. And user can choose the VPN mode from PPTP and L2TP. Initial Service IP VPN server IP address User Name The user name for authentication Password Password for authentication VPN As Default Route Set the VPN as default route 7.5.5 DMZ FIP12/FIP12W provides a facility DMZ Host that maps ALL unsolicited data on any protocol to a single host in the LAN.
7.5.6 Wireless 7.5.6.1 Wireless Settings Static: In static mode, user should fill in the values of IP Address, Subnet Mask, Default Gateway, Primary DNS and Second DNS got from your administration. Webpage Field Name Description Internet Connection Type Choose Static IP. IP Address The IP address of Internet port Subnet Mask The subnet mask of Internet port. Default Gateway The default gateway of Internet port. Primary DNS The primary DNS of Internet port.
7.5.6.2 Wireless Connection Webpage Field Name Description SSID Display the current connection status, and the name of connected AP appear in the brackets if the wireless is connected. The SSID name of all searched AP. Authentication Display the authentication type of the AP Encryption Display the encryption type of the AP Connection Status Display the status of the AP. The icon Status stands for the IP542N have connected to the AP. The icon stands for the signal strength of the AP. 7.5.
7.5.8 Routing Field Name Destination Description Destination address Host/Net Both Host and Net selection Gateway Gateway IP address Interface LAN/WAN/Custom three options, and add the corresponding address Comment Comment 7.6 SIP Account 7.6.1 Line 1 In this webpage, users can configuration the information about SIP account1, including the following 4 parts: Basic, Audio Configuration, Supplementary Service Subscription and Advanced. Following is the description about that. 7.6.1.
Webpage Field Name Description Line Enable If or not enable Line 1 Peer to Peer If or not enable PEER to PEER If enable, SIP-1 will not send register request to SIP server; In System Status, SIP-1 Status is Registered; SIP-1 can make call out, but others can not call SIP-1. Proxy Type DNS Choose DNS type from A Type and DNS SRV.
Type4 G.711A, G.722, G.729, G.723 Audio Codec Type5 Choose the audio codec type from G.711U, G.711A, G.722, G.729, G.723 G.723 Coding Speed Choose the speed of G.723 from 5.3kbps and 6.3kbps Packet Cycle The RTP packet cycle time Silence Supp Echo Cancel If or not enable silence If or not enable echo cancel 7.6.1.3 Supplementary Services Subscription Webpage Field Name Description Call Waiting If or not enable Call waiting. Hot Line Fill in the hotline number.
Webpage Field Name Description Domain name Mode If or not use domain name in the SIP URI Carry Port Information If or not carry Port information in the SIP URI. Signal Port The local port of SIP protocol, default is 5060 DTMF Type Choose the DTMF type from IN_band, RFC2833 and SIP INFO. RFC2833 Payload (>=96) User can use the default setting Register Interval The interval between two normal Register messages. You can use the default setting. Refresh RTP Port Set the port to send RTP.
7.6.3.1 SIP Parameters 7.6.3.2 NAT Traversal Webpage Field Name Description NAT Traversal If or not enable NAT. FIP12/FIP12W supports STUN traversal, choose “STUN” in the “NAT Traversal Mode” if you want traverse NAT/Firewall. STUN Server IP STUN server IP address, default is stun.fwdnet.net NAT Refresh Interval (sec) the interval to refresh Port STUN port 7.6.
Field Name Description SIP /RTP QoS The default value is 0,you can set a range of values is 0~63 7.7 Phone User can configuration volume, call forward, multi-functional key, dial plan, phonebook and call log. 7.7.1 Preference User can configuration the value of ring volume, speakerphone volume, handset volume and so on. 7.7.1.
Webpage Field Name Description Tone Type Choose tone type form China, US, Hong Kong and KR. Min Jitter Delay (ms) The Min value of FIP12/FIP12W’s jitter delay, FIP12/FIP12W’s jitter is an adaptive jitter mechanism. Max Jitter Delay (ms) The Max value of FIP12/FIP12W’s jitter delay, FIP12/FIP12W’s jitter is an adaptive jitter mechanism. Hook-On Tone Delay (sec) Ringing Time(Sec) How long FIP12/FIP12W will delay to sound hook-on tone when call party end call. How long FIP12/FIP12W will ring 7.7.1.
Call Immediately Key If or not enable ICMP Ping. If enable this option, FIP12/FIP12W will ping the SIP Server every interval time, otherwise, It will send “hello” empty packet to the SIP Server. ICMP Ping 7.7.2 Choose call immediately key form * or #. Multi-Functional Key Step 1.Choose one Exp Key from the Exp Key 1…4. Step 2.Choose one function type from speed dial, BLF, shortcut key, call pickup and call park. Step 3.Set the other corresponding parameters. Step 4.
Step 1.Choose one Exp Key to configuration Step 2.Select the BLF from the drop down list Step 3.Choose the Line from line1, line2. Step 4.Fill the monitored phone number in Expansion Step 5.Fill the pickup code in Pickup Code if user wants to pickup the call when there is a new call coming in monitored phone. Step 6.Press Step 7.Press to save changes. button to make changes effective. Adding shortcut key: Step 1.Choose one Exp Key to configuration Step 2.
Step 3.Choose the Line from line1, line2. Step 4.Fill the phone number in Expansion Step 5.Press to save changes and you can see the status of corresponding LED is solid green. Step 6.Press button to make changes effective. In idle, press the corresponding button to make call immediately. Adding call park: Step 1.Choose one Exp Key to configuration Step 2.Select the Call Park from the drop down list in type Step 3.Choose the Line from line1, line2. Step 4.
The syntactic, please refer to the following Dial Plan Syntactic Action Move Up Move Down Choose the dial plan mode from Deny and Dial Out. Deny means FIP12/FIP12W will reject the matched number, while Dial Out means FIP12/FIP12W allow dial out the matched number. Press it to move up. Press it to move down. Picture 1 Steps : Adding one dial plan: Step 1. Enable Dial Plan Step 2. Click Add button, and the configuration table like Picture 1 will appear Step 3. Fill in the value of parameters. Step 4.
Picture 2 will appear Step 4. Change the value of parameters. Step 5.Press OK button to end configuration. Step 6. Press Save Settings button to save changes. Deleting one dial plan: Step 1. Enable Dial plan Step 2. Choose one dial plan Step 3. Click Delete button to delete the dial plan 7.7.3.2 Dial Plan Syntactic No. String 1 0123456789 *# Legal characters 2 X Lowercase letter x stands for one legal character [sequence] To match one character form sequence.
Make outside dial tone after dialing “x”, stop until dialing character “y” For example： 6 7 x,y T “9,1xxxxxxxxxx”:FIP12/FIP12W make outside dial tone after inputting “9”, stop tone until inputting “1” “9,8,010x”: make outside dial tone after inputting “9”, stop tone until inputting “0” Set the delayed time. For example: “<9:111>T2”: FIP12/FIP12W will dial out the matched number “111” after 2 seconds. 7.7.3.3 Example 1.
4. Example 4 Using line 2, if user dials 2,622 or 2,6222 or 2,62222 or or , FIP12/FIP12W will call 5622 or 56222 or 562222 or or immediately. And FIP12/FIP12W will make outside dial tone after inputting “2” or “3”, stop tone until inputting “6”. 5. Example 5 Using line 1, if user dials , FIP12/FIP12W will reject the phone number out. 7.7.
Steps : Adding one phone book: Step 1. Click Add button, and the configuration table like Picture 1 will appear Step 2. Fill in the value of parameters. Step 3. Press OK button to end configuration. Step 4. Press Save Settings button to save changes. Editing one phone book: Step 1. Choose one phone book Step 2. Click Edit button, and the configuration table like Picture 2 Picture 3 will appear Step 3. Change the value of parameters. Step 4. Press OK button to end configuration. Step 5.
Deleting one phone book: Step 1. Choose one phone book Step 2. Click Delete button to delete the phone book Move one phone book to Black list: Step 1. Choose one phone book Step 2. Click Move to blacklist button to delete the phone book Picture 4 7.7.4.
Steps : Adding one Black List: Step 1. Click Add button, then the configuration table like Picture 1 will appear Step 2. Fill in the value of parameters. Step 3. Press OK button to end configuration. Step 4. Press Save Settings button to save changes. Editing one Black List: Step 1. Choose one black list Step 2. Click Edit button, and the configuration table like Picture 2 will appear Picture 2 Step 3. Change the value of parameters. Step 4. Press OK button to end configuration.
Step 5. Press Save Settings button to save changes. Deleting one Black List: Step 1. Choose one black list Step 2. Click Delete button to delete the black list Moving one Black List to phonebook: Step 1. Choose one black list Step 2. Click button to move the black list to the phonebook Picture 3 7.7.5 Call Log To view the call log information such as redial list (incoming call), answered call and missed call. 7.7.5.
7.7.5.2 Answered Calls 7.7.5.3 Missed Call 7.8 Administration Use can manage the FIP12/FIP12W in these six webpage; you can configuration the Time/Date, password, web access, system log and so on.
7.8.1 Management You can configuration the value of Time/Date, password, web access, and system log and so on. 7.8.1.1 Time/Date Webpage Field Name Description NTP Server Fill in the NTP server IP address or Domain name Time Zone Choose the time zone Manual Time Adjust time by manual Alarm Enable If or not enable alarm Alarm Time Daylight Saving Time Offset Start Month Set alarm time If or not enable daylight saving time.
Alarm: Step 1. Enable alarm Step 2.Set alarm time, like Picture 1. Step 3. Press Save Settings button to save changes and then press Reboot button to active changes. Picture 2 Daylight Saving Time: Step 1. Enable Daylight Saving Time. Step 2.
Change the password of admin mode: Steps: Step 1. Choose the admin from the drop-down list. Step 2. Input original password, default setting is null. Step 3. Input a new password twice time in New Password and Confirm Password. Change the password of user mode: Step 1. Choose the user from the drop-down list. Step 2. Input original password, default setting is null. Note: In admin mode, you can change the user password directly without the password of user mode. Step 3.
7.8.1.4 System Log Setting Webpage Picture 1 Field Name Description SysLog Server Set the SysLog Server IP address or domain name for FIP12/FIP12W. Log Level Choose log level from None/Error/Warn/INFO/Debug. The priority changes from left to right, left is the lowest, right is the highest; the higher priority, the more information in syslog. FIP12/FIP12W support local and remote Syslog. In local: Step 1. Set syslog server null and choose one kind of Log Level, like Picture 1. Step 2.
7.8.1.5 Factory Defaults Webpage Field Name Description Press Factory Default button to set FIP12/FIP12W default. 7.8.2 Firmware Upgrade Webpage Description Steps: Step 1. Choose a upgrade file type from Upgrade Software, Upgrade Ring Voice, Upgrade Dial Plan and Upgrade Config File Step 2. Press Step 3. Press to browser the upgrade file. to start upgrading, LCD will display the notice when upgrading. Step 4.
Before testing or using HTTPS, user should have https server and upgrading file and configuring file and CA Certificate file(should same as https server’s) and Client Certificate file and Private key file 3) User can uploading CA Certificate file and Client Certificate file and Private Key file in Equipment Manage/Cert Manage page. 4) Details please refer to document Provision_User Manual_en_v1.1.doc Field Name Description Provision Enable If or not enable provision.
Field Name Description Upgrade Enable If or not enable firmware upgrade via provision. Upgrade Error Retry Delay(sec) If the last upgrade fails, FIP12/FIP12W will try upgrading again after “Upgrade Error Retry Delay” period, default is 3600s. URL of upgrade file Upgrade Rule 7.8.4 SNMP Field Name SNMP Service Trap Server Address Read Community Name Write Community Name Trap Community Trap period interval(sec) Description If or not enable SNMP. Enter the trap server address.
Interval TR069 server User Name The TR069 server’s user name for connecting to FIP12/FIP12W Password The TR069 server’s password for connecting to FIP12/FIP12W SSL Key Fill in SSL key. 7.8.6 Diagnoisis In this page, user can do ping test and traceroute test to diagnose the device’s connection status. 1. Ping Test Enter the destination IP or host name, and then click Apply, device will perform ping test. 2.
7.8.7 Operation Mode Choose the Operation Mode as Basic Mode or Advance Mode. 8 Trouble Shooting This section provides solutions to problems that can occur during the installation and operation of the IP phone. Read the following descriptions if you are having problems. 8.1 No Operation after Power On Solution: Check if the power adapter is properly connected. If applicable, check if the PoE (Power over Ethernet) switch behind the IP phone is set correctly. 8.
Check if the handset cord is properly connected. 8.4 Can not Make a Call Solution: Check the status of your SIP registration status or contact your administrator, supplier, or ITSP for more information or assistance. 8.5 Can not Receive Any Phone Call Solution: Check the status of your SIP registration status, or contact your administrator, supplier, or ITSP for more information or assistance. 8.
Check if the version of IE is IE8, or use other browser such as Firefox or Mozilla, or contact your administrator, supplier, or ITSP for more information or assistance. 8.8 Forget the Password Default password of website and menu is null. If user changed the password and then forgot, you can not access to the configuration website or the menu items which need password.
Beijing Flying Voice Technology Limited Shenzhen Beijing Add: C1603,Caizhi International Building,18 East Zhongguancun Road,Haidian District Beijing Add: Room102, 1F East, Bldg 3#, Minqi Park, Pingshan, Xili, Nanshan Districe, Shenzhen, China ZIP code:100176 ZIP code:518052 Tel: +86-10-67885285 Tel: +86-755-26099365 FLYINGVOICE Page 81 of 81
