Fluid Audio SRI-2 User Guide – English
Für das Benutzerhandbuch in Ihrer Sprache besuchen sie bitte www.fluidaudio.com Para la guía del usuario en el idioma de su país, vaya a www.fluidaudio.com Pour le Guide de l'utilisateur dans la langue de votre pays, allez à www.fluidaudio.
Introduction Welcome to the SRI-2 from Fluid Audio! You may know us from the studio monitors we produce, so we know a thing or two about manufacturing great products for making music. We hope you enjoy the easy to use SRI-2 and take advantage of the speaker AB switching. A unique feature that allows you to check your mix on 2 different sets of studio monitors as you record and mix.
Key Features 24-bit/192 kHz 2 x 2 USB 2.0 audio interface 2 Class-A mic preamps supporting +48 V phantom power 2 XLR/TRS inputs for Line/Mic/Instrument recording 4 TRS outputs, for AB switching between two pair of monitors 1 High-power headphone output with independent level control USB-powered for mobile recording using either PC or Mac.
SUM Button: In it’s normal state, the SRI-2 will route input 1 to the left monitor output, and input 2 to the right monitor output. When the SUM button is engaged, however, it will combine both input signals to the main channel outputs, centering the input channels and creating a mono out to your monitors. (This is handy for a live performance setup where, for instance, a microphone is in input 1 and guitar is in input 2).
Hardware Setup 1. 2. 3. 4. 5. Place SRI-2 on a sturdy, flat surface. Leave enough room behind the SRI-2 for connection cables. CAUTION: Before powering the SRI-2 on or off, make sure to lower the volume of your monitor speakers (if connected) and remove headphones from your ears. Connect the included USB cable between SRI-2 and host computer. Ensure the cable is fully inserted at both ends. SRI-2 will power up automatically when plugged in. Driver Installation For Windows 7 or Above Version: 1. 2. 3. 4.
Top Panel 1. Master Volume Knob (monitor output) 6. Direct Monitoring Knob 2. Input Gain Control Knob (Ch. 1) 7. Input Gain Control Knob (Ch. 2) 3. Line/Mic/Instrument Button (Ch. 1) 8. Line/Mic/Instrument Button (Ch. 2) 4. 48V Phantom Power Button 9. Speaker AB Switch 5. SUM (Input summing) Button 10.
Front Panel 11. XLR/TRS Combo Input 1 (Mic/Line/Instrument) 12. XLR/TRS Combo Input 2 (Mic/Line/Instrument) 13.
Rear Panel 14. Speakers A Output Jacks (TS or TRS connections can be made) 15. Speakers B Output Jacks (TS or TRS connections can be made) 16. Kensington Lock 17. External Power Micro USB Input (for additional power when used with iPad) 18. USB 2.
Connection Diagram 9
Package Contents SRI-2 Audio Interface USB Cable SRI-2 User Guide Cubase LE/Cubasis Code Card Cubase LE/Cubasis Quick Start Guide 10
www.fluidaudio.com Fluid Audio SRI-2 User Guide V1.