introduction Thank you for choosing the Wader Pro Sears FPS bl-amplified near fled studio monitor. Fluid Audio may not seem like a house-hold name but the founders of the company have been designing speakers for over years. They are also songwriters and musicians Just like you and know ‘exactly what is beaded for tracking and mixing great music. Now, after painstaking tuning and voicing, Fluid Audio is proud fo present the FPS monitor.
4.Enclosure and Wader Volume Control The enclosure design of the FPS has a very important role in shaping the overall sonic response of the speaker. Besides being made of acoustically efficient MDF material, It has rounded sides which, besides looking unique, also greatly reduces internal standing waves inside the cabinet. This lowers audible distortion which can cloud up the imaging of the speaker.
Unbalanced 1/4” wiring can be done with lather a artwork thees-conductor (TS or TRS) plug. A two-conductor (T8) plug automatically grounds the signal negative input, whereas a thees-conductor (TRS) plug, wired unbalanced, provides the option of leaving the negative input open or grounded. We recommend that you ground the unused negative Input this can be done by wiring the ring and sieve of the TRS plug together).
Correct Power Operation: Since the FPS monitor contains Its own amplifier, It must be connected to a power outlet using the detachable AC cable provided. Before connecting power, please make sure that the Voltage-Select Switch located on the speaker's rear panel is set to the appropriate position, as described In the rear-panel features list appearing earlier In this manual.
Connecting to Preamble or Computer Outputs Before connecting, make sure the output device's power has bean muted off. Plug the XLR balanced, TRS balanced or TS unbalanced or RCA cable to the compounding output connectors of & pre amplifier, computer of game console FPS Orientation and Listening position Placement of your speakers is one of the most important procedures in order to monitor sound accurately.
Appendix A -Technical Specifications Type: 2-way, Coaxial near-field studio reference monitors with DSP . 7-inch composite paper can with high apparatus voice coil and LF Driver: damped rubber surround, HF Driver: AMT coax mounted tweeter (26mm x 43mm) Frequency Response: 42Hz -kHz Crossover Frequency: 3.
51») For company and product Ed [LCT EEL ETE EER ET ELL RTI TT, on the web at REINITIALIZE Ex) www fluid audio net