RT82, RT83, RT84, RT85 Reference High Fidelity Vinyl Turntable User Manual v2.1 Serious Performance™ Fluance.
Fluance RT82, RT83, RT84, RT85 User Manual 2 Introduction Fluance believes everyone should experience audio in its truest form, recreating the performance the way the artist intended. Utilizing only superior components and expert audio engineering, their products are a testament to the performance that can be achieved when a passion for music takes center stage. The perfect complement to any audiophile’s lifestyle, you’ll be enjoying live performances in your home for years to come.
Fluance RT82, RT83, RT84, RT85 User Manual Table Of Contents Introduction 2 What’s Included 4 Components and Connections 5 First Time Setup 6 Step One: Installing the Platter 6 Step Two: Installing the Counterweight 7 Step Three: Installing the Headshell 7 Step Four: Installing the Dust Cover 8 Step Five: Leveling the Turntable 9 Step Six: Balancing the Tonearm 10 Step Seven: Connecting the RCA and Ground Cables 12 Step Eight: Connecting the Power Adapter 12 Step Nine: Playing a Re
Fluance RT82, RT83, RT84, RT85 User Manual 4 What’s Included Turntable with Dust Cover Platter with Rubber Belt Rubber Turntable Mat Headshell with Stylus RT82/RT83/RT84 - Metal RT85 - Acrylic RT82/RT83/RT84 Only RT82-OM 10 RT83-2M Red RT84/RT85-2M Blue Counterweight 45 Adapter Power Adapter RCA Audio Cable Dust Cover Hinges Motor Pulley Cap Ground Cable Bubble Level LIFETIME Customer Support Manual Lifetime Customer Support 2 Year Warranty
Fluance RT82, RT83, RT84, RT85 User Manual 5 Components and Connections 1 9 2 10 3 11 4 12 5 6 13 7 14 8 21 15 16 17 20 18 19 1. Platter 11. 2. Motor Pulley 12. Tonearm Lock 3. Motor Pulley Cap 13. Tonearm 4. Rubber Belt 14. Headshell & Stylus 5. Spindle 15. RCA Audio Outputs 6. Rubber Turntable Mat (RT82/RT83/RT84 Only) 16. Ground Terminal 7. Speed Selection 18. Power Input 8. Power LED 19. Motor Servo 9. Counterweight 20. Isolation Feet 10.
Fluance RT82, RT83, RT84, RT85 User Manual 6 First Time Setup Step One: Installing the Platter 1. Remove the protective packaging and ensure the turntable is placed on a sturdy and level surface. Place the platter onto the spindle located in the middle of the turntable. 2. Platter Place the motor pulley cap over the motor pulley. Ensure the arrows are aligned so that the motor pulley cap is installed properly. Motor Pulley Cap Spindle Motor Pulley 3.
Fluance RT82, RT83, RT84, RT85 User Manual 7 Step Two: Installing the Counterweight 1. Secure the tonearm using the tonearm lock. 2. Slide the counterweight onto the end of the tonearm with numbers facing forward until it clicks on. Counterweight Tonearm Tonearm Lock Step Three: Installing the Headshell 1. Remove the headshell from the protective packaging and insert into the end of the tonearm. 2. Tighten the locking nut until the headshell is secure.
Fluance RT82, RT83, RT84, RT85 User Manual Step Four: Installing the Dust Cover 1. Important: Place dust cover on a soft surface to avoid scratching it. Install the hinges on the provided grooves located on the back of the dust cover. CAUTION: The hinges are spring loaded and can close with strong force. Use caution when installing. 2. Carefully open the hinges on the dust cover and insert into the hinge mounts pre-installed on the back of the turntable.
Fluance RT82, RT83, RT84, RT85 User Manual 9 Step Five: Leveling the Turntable This turntable features 3 adjustable feet to ensure the turntable is level regardless of the surface the turntable is resting upon. Lower Turntable Bubble Level Raise Turntable Adjustable Feet Use the table below with the included bubble level to adjust the feet and level the turntable. Note: The turntable comes in the fully lowered position.
Fluance RT82, RT83, RT84, RT85 User Manual 10 Step Six: Balancing the Tonearm Important! Complete all steps for balancing the tonearm. Incorrect tonearm balancing can cause damage to the stylus and to your records. For additional assistance go to www.fluance.com/support to watch a tutorial video for this process. 1. Remove the stylus protector. 2. Unlock the tonearm and lift the cueing lever. Lock 3. Position the tonearm over the platter. 4.
Fluance RT82, RT83, RT84, RT85 User Manual 11 Step Six (Continued): Balancing the Tonearm 7. Use the chart below to determine the recommended tracking force for your cartridge. Rotate the entire counterweight counterclockwise until the indicator ring is set to the correct value on the center line. (fig.1) 8. Set the anti-skating control value to match the recommended tracking force. (fig.2) Counterweight Indicator Ring (fig.1) (fig.
Fluance RT82, RT83, RT84, RT85 User Manual 12 Step Seven: Connecting the RCA and Ground Cables This turntable does not have an internal preamp so an external preamp or an amplifier with a PHONO input must be used. Connect the RCA and ground cable to the back of the turntable and then connect the other end to your external preamp or the PHONO input and ground terminal on your amplifier. Ensure the cable colors are matched to the RCA connector colors.
Fluance RT82, RT83, RT84, RT85 User Manual 13 Step Nine: Playing a Record Tip: For best audio performance the dust cover should be removed during playback. 1. Lift the dust cover 4. Unlock the tonearm lock 2. Place a record on the spindle (use the 45 Adapter if necessary) 5. Lift the cueing lever 6. 3. Turn the speed selection knob to the correct RPM typically listed on your record (Normal LP playback speed is 33 RPM) Move the tonearm to the desired starting point 7.
Fluance RT82, RT83, RT84, RT85 User Manual 14 Maintenance Replacing the Stylus Use the chart below to ensure you replace your stylus with the correct model. Replacement stylus and instructions are available at www.fluance.com/turntables Model Cartridge Stylus RT82 OM 10 Stylus 10 E RT83 2M Red Stylus 2M Red RT84 / RT85 2M Blue Stylus 2M Blue OM 10 2M RED/2M BLUE Upgrading the Cartridge The turntable supports the option of upgrading the cartridge.
Fluance RT82, RT83, RT84, RT85 User Manual 15 Parts and Accessories Replacement parts and turntable accessories are available at www.fluance.
Fluance RT82, RT83, RT84, RT85 User Manual 16 Troubleshooting Turntable Not Spinning • Turn the speed selection knob to 33 or 45 (power LED should light up). Lift the tonearm over the platter and it should start spinning. • The turntable should be connected to a known good power outlet and the power cable should be securely inserted into the unit. • Ensure the rubber belt is intact and hooked around the platter and the motor pulley.
Fluance RT82, RT83, RT84, RT85 User Manual 17 Cueing Lever Not Lowering Tonearm • Use instructions in step four of the first time setup instructions to confirm the tonearm was balanced and set to the correct tracking force. • Lock the tonearm and lower the cueing lever. Gently press down on the tonearm bridge until fully lowered to reset the tonearm lowering mechanism. Low Volume • Check the RCA connections are correct and fully inserted.
Fluance RT82, RT83, RT84, RT85 User Manual 18 Specifications Specifications RT82 RT83 RT84 RT85 Cabinet Specifications Material MDF Dust Cover Yes - Tinted Turntable Specifications Drive System Belt Drive Motor Motor Isolation DC Motor with Servo Controller Six-Point Rubber Isolation with Decoupling Isolation Ring Speed 33 1/3 RPM, 45 RPM Platter Aluminum Diameter of Platter Acrylic 12” (30 cm) Auto-Stop Yes Turntable Mat Rubber None Tonearm Specifications Type Static Balanced, S
Fluance RT82, RT83, RT84, RT85 User Manual Specifications 19 RT82 RT83 Load Impedance/Capacitance RT84 RT85 47 kohms/100 pF Output Voltage 4.0 mV 5.5 mV 5.5 mV 5.5 mV Cartridge Weight 5 grams 7.2 grams 7.2 grams 7.2 grams 1.25 - 1.75 grams 1.0 - 1.8 grams 1.0 - 1.8 grams 1.0 - 1.8 grams Headshell Weight Recommended Tracking Force 9 grams Vertical Tracking Angle 20° Rubber Belt Specifications Thickness 4.5 mm Width 915 mm Length 0.
Fluance RT82, RT83, RT84, RT85 User Manual 20 Warranty Information Thank you for choosing Fluance! We guarantee your investment in our products is a solid one. High performance components combined with quality craftsmanship allow us to maintain the highest possible production standards. All items are guaranteed against defects in materials and craftsmanship.
Fluance RT82, RT83, RT84, RT85 User Manual 21 Important Safety Instructions WA R N I N G WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Fluance RT82, RT83, RT84, RT85 User Manual 22 FCC & IC Information WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Fluance RT82, RT83, RT84, RT85 User Manual Correct cartridge alignment ensures the stylus is positioned properly relative to the grooves on the record. Incorrect alignment can cause distortion and can also cause unwanted wear and tear on your stylus. Follow the instructions below to ensure your cartridge is mounted correctly.
Fluance.