User Manual PA10 - High Fidelity Phono Preamp
Thank you for your purchase of this Fluance ® product. We hope you enjoy your experience. Questions? Give us a chance to help, we’re just a click away. Fluance.com/resources Fluance.com/videos Fluance.com/support Fluance.com/contact Don’t forget to register your product with us! Fluance.
Introduction Thank you for your purchase of your Fluance product. We hope you enjoy your experience. If you have any questions please visit us at www.Fluance.com/support. Fluance believes everyone should experience audio in its truest form, recreating the performance the way the artist intended. Utilizing only superior components and expert audio engineering, their products are a testament to the performance that can be achieved when a passion for music takes center stage.
Product Layout 1 2 3 4 6 5 1. Power LED 4. Ground Terminal 2. Phono RCA Input 5. 20Hz High Pass Filter 3. Power Input 6.
Turntable Connection IMPORTANT: If your turntable has an internal phono preamplifier it must be disabled/bypassed before connecting to the PA10. For information on disabling/bypassing an internal preamplifier please check the turntable manual or contact your turntable manufacturer. 1. Connect an RCA cable and ground cable to your turntable. 2. Connect the RCA and ground cables to the Phono RCA Input and Ground Terminal on the PA10.
Amplifier/Powered Speaker Connection 1. Connect an RCA cable and ground cable to the RCA Output and Ground Terminal on the PA10. 2. Connect the RCA and ground cables to an RCA input and ground terminal on your amplifier or powered speakers. Note: If there is no ground terminal on your powered speakers/amplifier loosening a screw on the chassis, inserting the ground cable, and tightening the screw can achieve the same result.
Power Connection IMPORTANT: Ensure your receiver or speakers are turned off when connecting the PA10 to power. 1. Connect the power adapter to the back of the PA10. 2. Plug the other end directly into a wall outlet. The Power LED will indicate it is receiving power. 3. Put on a record and enjoy your favorite music! 20 Hz High Pass Filter The high pass filter, also known as a rumble filter, gently rolls off low end frequencies and eliminates subsonic frequencies.
Frequently Asked Questions What cartridges are compatible with the PA10? The PA10 is intended for use with MM (Moving Magnet) cartridges only. Is the preamplifier shielded from external interference? The PA10 phono preamplifier is internally shielded to protect the circuitry from external sources of electromagnetic interference. What turntables are compatible with the PA10? All Fluance turntables are compatible with the PA10.
Specifications Audio Specifications Gain 38 dB Audio Circuit Type Passively Equalized RIAA Compatible Sylus MM Phono Input Sensitivity 30 mV Total Harmonic Distortion (THD) 0.004% Signal/Noise (S/N) Ratio > 90 dBA Noise Floor (unweighted) < 220 uV RIAA Equalisation Accuracy (deviation) 20 Hz ~ 20 kHz +/-0.5 dB Input Impedance 47 kohm Input Load Capacity 100 pF Output Impedance 100 ohm Output Voltage 2.
FCC Warning WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of Industry Canada.
Warranty Information Thank you for choosing Fluance! We guarantee your investment in our products is a solid one. High performance components combined with quality craftsmanship allow us to maintain the highest possible production standards. All items are guaranteed against defects in materials and craftsmanship. Fluance has outstanding quality control; if something should go wrong with any of our products, we will repair it free of charge within the warranty period.
Fluance.
