Use and Care Manual

HarvestHouse Pro with X-Up technology (FHXUPR)
56w x 70d x 80h
1. Extend X-Up shelving
2. Lock shelves into place using locking
mechanisms on each side
3. Arrange shelving so
top bow connector s
face outward
4. Connect top bow pole (marked
“A” 6pcs, “B” 2pcs, “C” 1pc) to
each section of shelving
5. Install roof pole (marked
“D” for full set roof, “E” for
half set roof) across both
sections of bows
6. Place poles (marked “F” 6pcs) along back
wall and set wire shelves (back wall shelves
are shorter) into each section of the entire
greenhouse
7. Place cover over shelving
assembled shelving unit

Summary of content (1 pages)