User’s manual FLIR VP50/VP52 Non-contact AC voltage detector
User’s manual FLIR VP50/VP52 #T559851; r.
Table of contents 1 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Quality assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.3 Documentation updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.
1 Disclaimers 1.1 Copyright 1.3 Documentation updates © 2013, FLIR Systems, Inc. All rights reserved worldwide. No parts of the software including source code may be reproduced, transmitted, transcribed or translated into any language or computer language in any form or by any means, electronic, magnetic, optical, manual or otherwise, without the prior written permission of FLIR Systems.
2 Safety information Note Before operating the device, you must read, understand, and follow all instructions, dangers, warnings, cautions, and notes. Note FLIR Systems reserves the right to discontinue models, parts or accessories, and other items, or to change specifications at any time without prior notice. Note Do not try to repair this unit. There are no user serviceable parts. Note Remove the batteries if the device is not used for an extended period of time.
2 Safety information WARNING Do not put the unit near high temperatures or in areas of high humidity. This can cause damage to the instrument. WARNING Do not use the unit if it is wet or if there is damage to it. Injury to persons can occur. WARNING Do not apply more than the rated voltage between the probe tip and the ground. This can cause damage to the instrument and injury to persons. WARNING Do not operate with the case open. Injury to persons can occur.
2 Safety information WARNING Do not let children play with the batteries and/or the packing material. These can be dangerous for children if they use them as toys. WARNING Do not touch expired or damaged batteries without gloves. Injury to persons can occur. WARNING Do not cause a short-circuit of the batteries. This can cause damage to the instrument and can cause injury to persons. WARNING Do not put the batteries into a fire. Injury to persons can occur.
3 Introduction Congratulations on your purchase of the FLIR VP50/VP52 non-contact AC voltage detector. Proper use and care of this meter will provide many years of reliable service. The portable, rugged FLIR VP50/VP52 can detect the presence of AC voltage at an electrical outlet, junction strip, circuit, or other device without actually touching the device under test (FLIR VP50: Minimum excitation voltage is 90 V AC; FLIR VP52: Minimum excitation voltage is 190 V AC).
4 Description 4.1 Meter parts Figure 4.1 Meter parts 1. 2. 3. 4. 5. 6. 7. 8. AC voltage sensor. Tip light. Alarm indicator. Status indicator. Power button. Pocket clip. Work light button. Work light and cover for battery compartment. #T559851; r.
5 Operation Note Do not try to repair this unit. There are no user serviceable parts. WARNING Do not use the instrument before you have done a test of it on a known live circuit. Injury to persons can occur. WARNING Do not try to use the instrument as an AC voltage detector if the batteries are weak or bad. This can cause damage to the instrument. WARNING Before you use the unit, always do a test of the Voltage Detector on a known live circuit to make sure that it operates correctly.
5 Operation WARNING Do not use the unit if it is wet or if there is damage to it. Injury to persons can occur. WARNING Do not apply more than the rated voltage between the probe tip and the ground. This can cause damage to the instrument and injury to persons. WARNING Do not operate with the case open. Injury to persons can occur. 5.1 Modes The meter operates in two different modes: Normal mode and High-sensitivity mode.
5 Operation 2. Once powered on, press the power button to toggle between High-sensitivity mode and Normal mode. Note Test on a known live circuit before testing on an uncertain circuit. • • 3. 4. Hold the AC voltage sensor very close to the voltage source. If voltage is present, the meter vibrates and the alarm indicator flashes. • • 5. In Normal mode, the status indicator illuminates a solid green color.
6 Maintenance 6.1 Cleaning and storage Clean the meter with a damp cloth and mild detergent; do not use abrasives or solvents. If the meter is not to be used for an extended period, remove the batteries and store them separately. 6.2 Battery replacement 1. 2. Switch off the meter before attempting to replace the batteries. Unscrew the head of the meter. 3. 4. Replace the two standard AAA batteries, observing correct polarity. Secure the battery compartment cover. #T559851; r.
7 Technical specifications 7.1 System specifications Dimensions 29 mm × 26 mm × 156 mm(1.1″ × 1.0″ × 6.1″) Weight 0.20 kg (0.
8 Technical support Website http://www.flir.com/test Technical support T&MSupport@flir.com Repairs Repair@flir.com #T559851; r.
9 FLIR Limited Lifetime Warranty See http://support.flir.com/warranty for the FLIR Limited Lifetime Warranty that applies to this product. #T559851; r.
A note on the technical production of this publication This publication was produced using XML — the eXtensible Markup Language. For more information about XML, please visit http://www.w3.org/XML/ A note on the typeface used in this publication This publication was typeset using Linotype Helvetica™ World. Helvetica™ was designed by Max Miedinger (1910–1980) LOEF (List Of Effective Files) T501023.xml; en-US; AD; 9134; 2013-09-25 #T559851; r.
Corporate last page Headquarters FLIR Systems, Inc. 27700 SW Parkway Ave. Wilsonville, OR 97070 USA Telephone: +1-503-498-3547 Website http://www.flir.com Customer support http://support.flir.com Publ. No.
