safety Instruction . startup. genital Operation and Setting and Corrective Measures 8 Measuring Conditions ‘The compact and handy base medal was specifically designed for inroad applications. Shortcut and Soft grip keys for addition, subtraction, area and volume calculation make measuring fast and vary reliable.
Permitted Use « Measuring distances « Computing functions, e. g.
Laser Classification The CEM produced a visible laser beam which emerges from the front of the Instrument. Laser Ass 2 products: Do not stare io the laser beam or direct t towards other people unnecessarily. Eye's protection is normally afforded by aversion responses including the blink reflex. /\ warning: Looking directly Into the beam with optical lads (e.g. binoculars, telescopes) can be hazardous. Precautions: Do not look directly imo the beam with optical aids. A\ caution: Looking Into the laser beam m
3.Initial Operation and Setting Switching On and Off Switches on the instrument and laser. 3} Press this button longer to switch off the instrument. The instrument switches aff automatically after three minutes of inactivity. Clear Button The last action is canceled or the data display is eared. Fin the mode of History storage, press Storage button and Clear button simultaneously will clear all storage data in the memory.
Using the Tripod reference The reference must be appropriately adjusted in order to be able to take comet measurements with a tripod. You can switch the reference on the tripod on or off by longer pressing the reference button. Multi functional end piece The Instrument can be adapted for the following measuring situations See figure + For measurements from an edge, fold out the positioning bracket until it first locks in place.
Display Insemination #3 interdenominational button of the display can be switched on or off, user can trigger the function when darkness situation. heist Distance Unk Setting For instrument Click the button longer to change the next type af unit. The following unit can be set: Distance Area Volume 1 0.000 m 0.000 me 0.000 me 2 [oon 0.000 for 0.000 fir 3 [os 0.000 ft 0.000 ft a [peon 0.000 0.000 7 5 [ooo 118 content 0.
Single Distance Measurement Press to activate the laser. Press again to trigger the distance measurement. The measured value is displayed immediately. Continuous lager Press and hold down the key until the Laser active character appears permanently In the display and a beep sofa. Every further press of the key releases a distance measurement. You can switch the continuous laser function on or off by press this button longer. Or you can press the key to switch the device and Laser continuous operation off.
Adan sample, the user can move from a wall to the required distance, while the actual distance can be read continuously. For continuous measurement, push button” Sun the Indicator for continuous measurement appears in the display. And pries MEAS or Clear but ton again to stop the function. The function is terminated automatically afar continuous 100 times measurement.
Addition | Subtraction Distance measuring. £3 The next measurement is added to the previous one. The next measurement i subtracted from the previous ane. The last step is canceled. *} Return ta the single distance measurement Area Measurement Press thermonuclear button once. The £— symbol appears in the display. Press £3 button to take the first length measurement (e.g. length). Press 9 again to take the second length measurement (e.g. width). ‘The rise of the function s displayed in the summary line.
Slummer Measurement For volume measurements, push button twice until the (J) indicator for volume measurement appears in the display. press to takes first distance measurement e.g. length} press ta takes second distance width) press ta takes the thins distance height). Th result a the function is displayed in tha summary line.
Indirect Measurement (See "Figure H7) Indirect measurement determining a distance using 2 auxiliary measurements. 9. when measuring heights that require the measurement of two or three measurements as following step: Crass this button £7} once, the display «1 shows. Tha distance to ba measured flashes in the symbol. Aim at the upper point (1) and trigger the measurement. After the first measurement the values Is adopted. Keep the Instrument as horizontal as possible.