Raymarine UK Limited www.raymarine.
RAY53/63/73 Installation & operation instructions English (en-US) Date: 04-2020 Document number: 81381-3 © 2020 Raymarine UK Limited 81381-3-en-US_A5_PRINT.
Trademark and patents notice Raymarine, Tacktick, Clear Pulse, Truzoom, SeaTalk , SeaTalk hs, SeaTalkng , and Micronet, are registered or claimed trademarks of Raymarine Belgium. FLIR, LightHouse, DownVision, SideVision, RealVision, HyperVision, Dragonfly, Element, Quantum, Axiom, Instalert, Infrared Everywhere, The World’s Sixth Sense and ClearCruise are registered or claimed trademarks of FLIR Systems, Inc.
Contents Chapter 1 Important information ...................................... 11 Incompatible MFDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Certified Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.4 Parts supplied – Ray53 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 FCC . . . . . . . . . . . . . . . . . . . . .
Connections to other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Cable shielding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 3.3 Wireless product location requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Connections to other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Wireless location requirements. . . . . . . . . . . . .
Chapter 5 Getting started.............................................. 47 Setting time format and offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 5.1 Controls and interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 5.18 Station priority (Ray63 and Ray73 only) . . . . . . . . . . . . . . . . . . . . . . . . . . 56 5.2 Handset controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.3 Urgency calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 8.2 Scan Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Making an urgency call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Setting Scan mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 10 Maintenance ............................................... 83 13.4 Technical specification — Wired handset (Raymic) . . . . . . . . . . . . 107 10.1 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 13.5 Technical specification - Wired (Passive) speaker . . . . . . . . . . . . . 108 Routine checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 13.
Chapter 1: Important information Warning: 12 Volt dc only Certified Installation Warning: Chassis grounding Raymarine recommends certified installation by a Raymarine approved installer. A certified installation qualifies for enhanced product warranty benefits. Contact your Raymarine dealer for further details, and refer to the separate warranty document packed with your product.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Warning: Maximum Permissible Exposure 4. Consult the dealer or an experienced radio / TV technician for help.
Product disposal Technical accuracy Dispose of this product in accordance with the WEEE Directive. The Waste Electrical and Electronic Equipment (WEEE) Directive requires the recycling of waste electrical and electronic equipment which contains materials, components and substances that may be hazardous and present a risk to human health and the environment when WEEE is not handled correctly. To the best of our knowledge, the information in this document was correct at the time it was produced.
Chapter 2: Document and product information Chapter contents • 2.1 Product documentation on page 16 • 2.2 Product overview on page 16 • 2.3 Applicable products on page 17 • 2.4 Parts supplied – Ray53 on page 18 • 2.5 Parts supplied – Ray63 / Ray73 on page 19 • 2.6 Licensing on page 19 • 2.7 Obtain MMSI (Maritime Mobile Service Identity) number on page 20 • 2.8 Automatic Transmitter Identification System (ATIS) on page 21 • 2.
2.1 Product documentation The following documentation is applicable to your product: For further information about the Print Shop, please visit the Print Shop FAQ pages: http://www.raymarine.co.uk/view/?id=5751. Note: • Accepted methods of payment for printed manuals are credit cards and PayPal.
– Connect the optional Wireless hub to the second station connector, allowing up to 2 fully functioning wireless handset stations. Name Part number E70524 Ray53 – Add an optional Loud Hailer the Ray73 can be used as a fog horn or loud public address (PA) system. Required additional components Features • SeaTalkng ® / NMEA 2000 • Built-in AIS receiver (Ray73 only). • NMEA 0183 2.
Part number Description Compatible MFDs Incompatible MFDs A80290 Wired handset extension cable 15 m (49.2 ft) Your radio can be integrated with compatible MFDs, enabling DSC distress message information and position data on your MFD screen. This product is NOT compatible with the following legacy Raymarine multifunction displays. A80297 Wired handset adaptor cable with male RCA audio (400 mm 1.
Item Description Item Description Canada licensing requirements 8 Documentation 5 Mounting bracket (Trunnion) 9 4 x M4 nuts, spring washers and M4x25 machine screws (For Panel mounting) 6 Mounting bracket knobs You do not need a license to operate this product within the sovereign waters of Canada or the United States of America (USA).
FCC Type accepted Output power Modulation Frequency range Parts 2, 15 and 80 Modulation MIMOOFDM/DSSS/CCK Frequency TX:156.025-157.425 RX:156.050-163.275 1. 2412MHz to 2472MHz ISED ID 4069B-RAY701D FCC ID PJ5–RAY701 FCC Type accepted Parts 2, 15 and 80 Output power Modulation Frequency range MIMO-OFDM/DSSS/CCK Frequency 2412-2472MHz Note: ISED previously IC (Industry Canada) 2.
In the United States of America, the MMSI and Static Data must be entered only by a Raymarine® dealer or other appropriately qualified installer of marine communications equipment on board vessels. The user is NOT authorized to do this. In some areas, a radio operator licence is required before an MMSI number will be issued. You can request an MMSI number from same agency that issues radio or Ship Radio licences in your area.
Chapter 3: Installation Chapter contents • 3.1 Selecting a location on page 24 • 3.2 EMC installation guidelines on page 25 • 3.3 Wireless product location requirements on page 26 • 3.4 Product dimensions on page 27 • 3.5 Mounting on page 29 Installation 81381-3-en-US_A5_PRINT.
3.1 Selecting a location • sufficient space is available around the product. 100 MHz to 2.5 GHz, and should be fitted to the power cable and any other cables exiting the EMI-emitting device, as close as possible to the position where the cable exits the device. Warning: Potential ignition source • there is nothing behind the mounting surface that may be damaged when drilling. Cable routing requirements This product is NOT approved for use in hazardous/flammable atmospheres.
1 This location provides optimal performance (above decks). 2 In this location, performance may be less effective. 3 This location is NOT recommended. Vessel construction The construction of your vessel can have an impact on performance. For example, the proximity of heavy structures such as a structural bulkhead, or the interior of larger vessels may result in a reduced signal. The construction materials can also have an impact.
• If a ferrite has to be removed for any purpose (e.g. installation or maintenance), it must be replaced in the original position before the product is used. • Use only ferrites of the correct type, supplied by Raymarine or its authorized dealers. • Where an installation requires multiple ferrites to be added to a cable, additional cable clips should be used to prevent stress on the connectors due to the extra weight of the cable.
For reliable wireless performance the signal strength should be better than –75dBm, the closer the signal is to zero the better the wireless performance will be (e.g. –40dBm is better than –75dBm). C 88.5 mm (3.5 in) Product dimensions — Ray63 / Ray73 D 134 mm (5.3 in) Panel mount dimensions E 39.75 mm (1.6 in) 9.
C 204.6 mm (8.05 in) D 90 mm (3.54 in) Product dimensions - Wired handset (Raymic) Product dimensions - speakers The dimensions for the Passive and Active speakers are shown below. A maximum cable bend radius of 90 mm (3.54 in) is required to allow for the handset cable connector. Product dimensions — Fistmic A 68.5 mm (2.7 in) B 97.6 mm (3.8 in) C 8 mm (0.3 in) D 36 mm (1.4 in) The Fistmic’s fitted, coiled lead can be extended comfortably to approximately 1 meter (3.3 ft.) A 167.34 mm (6.
Product dimensions - Wireless hub The dimensions for the wireless hub are shown below. Product dimensions - Wireless handset and holster 3.5 Mounting Tools required for installation A 173.33 mm (6.82 in) B 50.5 mm (1.99 in) C 71.41 mm (2.81 in) A 26.7 mm (1.05 in) B 68.04 mm (2.68 in) C 32.16 mm (1.27 in) D 70 mm (2.76 in) E 109.2 mm (4.30 in) F 121.6 mm (4.79 in) G 6.2 mm (0.24 in) 3. Pozi-drive screwdriver H 87.72 mm (3.45 in) 4. Adhesive tape I 29.14 mm (1.
Mounting options Panel mounting — Ray53 The product can be mounted in the following configurations. Removing the mounting hole covers Before the radio can be panel mounted the mounting hole covers must be removed. 1. Mark the location of the bracket mounting holes on the mounting surface. 1. Bracket mount — Table top 2. Bracket mount — Overhead 3. Bracket mount — Bulkhead 4. Panel mount Bracket mounting Follow the steps below to mount the product on it’s bracket. 2.
1. Using a drill and a 4 mm (5/32) drill bit, drill out the 4 mounting holes. Holes should be drilled from the front of the unit, taking care not to apply too much force to the drill. Panel mounting To panel mount the radio follow the steps below. Before mounting the product, ensure that you have: 4. Using a suitable saw, cut along the inside edge of the cut-out line. 5. Ensure that the unit fits into the removed area and then file around the rough edge until smooth. 6.
1. Check the selected location for the unit. A clear, flat area with suitable clearance behind the panel is required. Note: Fistmic mounting The supplied gasket provides a seal between the unit and a suitably flat and stiff mounting surface or binnacle. The gasket should always be used. It may also be necessary to use a marine-grade sealant if the mounting surface or binnacle is not entirely flat and stiff or has a rough surface finish. The Fistmic can be mounted by following the steps below.
Pass-through panel kit mounting Wired handset mounting using the holster When installing handsets, the pass-through panel kit should be used to secure the cable’s connector to the panel the cable has to pass through. Follow the steps below to mount the wired handset. Before mounting, ensure that your selected location meets the location requirements found in this document. 1. Remove the speaker’s bezel. 2.
the location of the screw holes and the center hole on the mounting panel. Note: 5. Fully tighten the screws. Drill bit, tap size and tightening torque is dependent on the thickness and type of material the unit is to be mounted on. 6. Connect the antenna to the top of the hub. Mounting the wireless hub Antenna orientation Radio waves are emitted from the wireless hub perpendicular to the orientation of the hub’s antenna.
1 Antenna (supplied with the hub) 2 Nut 3 M3x10 fixing screws x 3 4 Mounting plate 5 Mounting surface (14 mm (0.55 in) diameter hole required) 6 5 m (16.4 ft) antenna extension cable 7 Split washer 8 Wireless hub • You pay particular attention to the wireless location requirements. • The product operates correctly at the desired location before mounting. • The product does not interfere with nearby devices. 1. Check the selected location for the Mounting plate, a clear flat area is required.
Chapter 4: Cables and connections Chapter contents • 4.1 General cabling guidance on page 38 • 4.2 Connections overview — Ray53 on page 38 • 4.3 Connections overview — Ray63 / Ray73 on page 39 • 4.4 Power connection on page 39 • 4.5 Fistmic connection (Ray63 / Ray73 only) on page 42 • 4.6 Secondary handset station (Ray63 / Ray73 only) on page 42 • 4.7 SeaTalkng ® / NMEA 2000 connection on page 42 • 4.8 NMEA 0183 connection on page 43 • 4.9 Connecting a VHF antenna on page 43 • 4.
4.1 General cabling guidance Cable types and length It is important to use cables of the appropriate type and length. • Unless otherwise stated only use cables supplied by Raymarine. • Where it is necessary to use non-Raymarine cables, ensure that they are of correct quality and gauge for their intended purpose. (e.g.: longer power cable runs may require larger wire gauges to minimize voltage drop along the run). Cable routing Cables must be routed correctly, to maximize performance and prolong cable life.
4.3 Connections overview — Ray63 / Ray73 Primary and secondary station connectors The following connections are available on the Ray63 and Ray73. The connectors below are used to connect the supplied Fistmic and / or the optional Wired (Raymic) handset to the Base station. Connector 1. Primary station (8 pin) connection. 2. Grounding point — DO NOT USE! 3. Second station (12 pin) connection. 4. SeaTalkng ® connection. 5. S0239 VHF antenna connection. 6. TNC GNSS (GPS) connection. 7.
In-line fuse and thermal breaker ratings The following in-line fuse and thermal breaker ratings apply to your product: In-line fuse rating Thermal breaker rating 10 A 7 A (if only connecting one device) Note: • The suitable fuse rating for the thermal breaker is dependent on the number of devices you are connecting. If in doubt consult an authorized Raymarine® dealer. • Your product’s power cable may have a fitted in-line fuse.
• The power cable supplied with your product may NOT include a separate drain wire. If this is the case, only the power cable’s red and black wires need to be connected. Suitable for a vessel without a common grounding point. In this case, if your product’s power cable is supplied with a separate drain wire then it should be connected directly to the battery’s negative terminal.
4.5 Fistmic connection (Ray63 / Ray73 only) 4.6 Secondary handset station (Ray63 / Ray73 only) Wired handset extension cables Front connection The Raymic handset accessory can be connected to the Secondary station connector located on the rear of the radio, this will create a second fully functional station. The maximum length of cable from the Handset to the Base station should not exceed 50 m (164 ft) Handset station cabling can be extended using approved extension cables.
Note: 4.8 NMEA 0183 connection 1. The NMEA 0183 wires can be used to connect the unit to a NMEA 0183 GNSS (GPS) receiver or MFD. The product must be connected to a correctly terminated backbone. metal (which may be grounded). A protective boot is supplied that can be used to ensure isolation of the antenna connection. 2. You cannot connect your product directly to a MFD. 3. Refer to the instructions supplied with your SeaTalkng ® / NMEA 2000 device for details on creating a backbone.
4.10 GNSS (GPS) antenna connection You can improve the performance of your radio’s built-in GNSS (GPS) receiver using an external antenna. 4.12 Wireless hub connection The Wireless hub connects to the second station connector on the rear of the Ray63 / Ray73 radios using the Wireless hub adaptor. The Wireless hub allows connection of wireless handset stations. Refer to the Power distribution section for guidance on connecting to a power supply.
One Wireless speaker can be connected to each Wireless handset. Refer to 6.3 Connecting the wireless speaker to the Wireless handset for the connection procedure. 4.16 Loud hailer connection (Ray73 only) A Loud hailer (M95435) can be connected to the radio using the loud hailer wires. 4.15 Wireless speaker – power connection The wireless speaker is an active speaker that requires a 12 V dc power supply. The power cables should be connected via a distribution panel or, if required directly to a battery.
Chapter 5: Getting started Chapter contents • 5.1 Controls and interface on page 48 • 5.2 Handset controls on page 48 • 5.3 Powering the unit on on page 49 • 5.4 Powering the unit off on page 49 • 5.5 Homescreen overview on page 49 • 5.6 Shortcut list on page 51 • 5.7 Shared Brightness on page 52 • 5.8 Initial startup on page 52 • 5.9 Accessing the menu on page 53 • 5.10 Selecting a language on page 53 • 5.11 Switching on the AIS receiver on page 53 • 5.
5.1 Controls and interface Fistmic 5.2 Handset controls Overview of wireless handset controls. The controls and interface available are as follows: Base station 1. 1. Built-in speaker 2. Rotary knob with center OK push button — Press knob in to access menu and DSC functions and to confirm selections. Turn rotary clockwise or anti-clockwise to move up and down through menu items or to change channel from the Homescreen. 3. LCD 4. VOL/SQ — Turn knob to adjust volume or squelch up and down.
9. HI/LO — Press to switch between High (25 W) and Low (1 W) transmit power. Powering the handset 5.5 Homescreen overview To power the Handset on and off follow the steps below. The information below describes the on-screen characters and symbols which are shown on the Homescreen.. With the Base station powered On: 1. 10. DISTRESS — Lift up the spring-loaded cover and press this button to make a DSC distress call. 11.
• s = Simplex — Simplex channels transmit and receive on the same frequency. • d = Duplex — Duplex channels use separate frequencies to transmit and receive. 9. Symbol Name Description Receive Indicates the radio is currently receiving a transmission Weather Indicates that the weather alerts mode is activated. Power supply voltage too low Indicates the power supply to the radio is below the specified operating voltage. Optional text — Provides extra user guidance.
Symbol Name Sub-options * Weather Mode • Weather Homescreen Symbol Name Sub-options ** Intercom • Intercom Note: * Menu items not available when radio has ATIS enabled or if the radio has been pre-programed in MARCOM-C mode. ** Menu only available when compatible accessories are connected.
ii. Rotary knob on the Base station. 4. Press the Back button to return to the previous screen. LightHouse™ / LightHouse™ 2 MFD If Shared Brightness is already enabled then selecting this menu item will disable Shared Brightness. Instrument display / Pilot controller The Backlight and Contrast settings can also be accessed from the Display set-up menu: Menu > Set-up > Display set-up . 3. Select Group. 4. Select the group that you want to assign the radio to.
only applicable if the radio has been pre-programed in MARCOM-C mode. See 5.14 Entering an ATIS ID for more information. 6. Frequency band selection — Sets the relevant channels for your region. This step is not applicable if the radio has been pre-programed in MARCOM-C mode. See 5.15 Changing the radio region for more information. 5.9 Accessing the menu The radio’s various options and settings are contained within the menu. • Français — French • Deutsch — German • Italiano — Italian 3.
3. Select Yes . 4. Use the Rotary knob or the Channel Up and Channel Down buttons on a Raymic handset to cycle through the available numbers and press OK to confirm each number and move to the next digit. You should only enter the unique 9 digit MMSI number provided by your licensing authority. MMSInumbersstartingwitha‘0’areonlyusedfor groupsandcoaststations.
Enabling and disabling ATIS mode ATIS is a European system used on some inland waterways. A unique ATIS ID must be entered before ATIS mode can be enabled. With ATIS mode enabled the radio’s region will be fixed to the INT (international) frequency band and the following functions are disabled: 2. Select Channel set-up. 3. Select Frequency band. 4. Select the relevant region from the list.
Once the warning has been acknowledged the GNSS (GPS) icon will continue to flash. The No position data warning is repeated every 4 hours if position data is still unavailable, has not been entered manually or has been entered manually but over 23.5 hours ago. If position data has been entered manually the display alternates between displaying the manual position and time and the Manual Position message.
Chapter 6: Wireless handset stations Chapter contents • 6.1 Wireless handsets on page 58 • 6.2 Connecting a wireless handset to the hub on page 58 • 6.3 Connecting the wireless speaker to the Wireless handset on page 59 • 6.4 Wireless set-up menu options on page 60 Wireless handset stations 81381-3-en-US_A5_PRINT.
6.1 Wireless handsets Wireless handsets are compatible with the Ray63 and Ray73 VHF DSC radios. Using the optional wireless accessories you can create up to 2 fully functional wireless handset stations. As a minimum the Wireless hub (A80540), Wireless hub adaptor cable (R70739) and Wireless handset (A80544) are required to create a wireless handset station. Additionally a Wireless speaker (A80543) can be connected to each Wireless handset.
Checking the Wireless hub's password Changing the hub's wireless channel Note: You can check the Wireless hub’s password at anytime using a Wired handset. If you experience interference with your wireless handset station, you can change the wireless channel used by the hub to a channel that is less congested with wireless signals. You must use a Wired handset to change the Hub’s wireless credentials. 1.
The Wireless handset’s audio will now be heard through the Wireless speaker. Note: • You can only output audio to 1 speaker from the same handset. • If the pairing is unsuccessful, power the wireless speaker off and then back on again and repeat the process. Disconnecting a Wireless speaker To disconnect your Wireless speaker from the Wireless handset follow the steps below: 6.
Wireless handset not connected menu When a connection to a Wireless hub is not available or connection is cancelled, the following menu options will be displayed on the Handset. Menu item Description Options Wireless hub Enables you to search for and connect to a Wireless hub. List of available networks. Language Enables selection of the user interface language.
Chapter 7: Digital selective calling (DSC) Chapter contents • 7.1 Digital Selective Calling (DSC) on page 64 • 7.2 Distress calls on page 64 • 7.3 Urgency calls on page 67 • 7.4 Safety calls on page 67 • 7.5 Individual (routine) calls on page 67 • 7.6 Group calls on page 68 • 7.7 Position requests on page 68 • 7.8 Phonebook on page 69 • 7.9 Call logs on page 69 • 7.10 Test calls on page 70 • 7.
7.1 Digital Selective Calling (DSC) Traditional VHF radio systems require users to listen until someone speaks, and then determine whether the call is for them. DSC ensures that calls are received by alerting or announcing the intended recipient(s) first so they are ready to listen to the subsequent message on the relevant channel.
In an emergency you can use your unit to make an automatic DSC distress call. 3. Release the PTT button. Cancelling a distress call after transmission With the spring loaded cover open: Making a Mayday call A distress call can be cancelled after it has been transmitted. Making a distress call OVER In an emergency you can also make a Mayday call following the instructions below. 1. Press the 16 PLUS button. 2. Press and hold the PTT button. 3.
Cancel my distress alert of ,
Acknowledging a distress relay sent to your vessel If a distress relay is specifically sent to your vessel this will be because the sender deems you to be in a position to assist in the rescue. The distress relay information is displayed onscreen. When a distress relay is received: 1. Select Show info from the options to review the relevant details. 2. If the distress relay was sent individually to you, select Accept to send a distress relay acknowledgement. 3. Ensure the radio is tuned to channel 16.
Disable Equipment disabled 3. To reject the call, select Reject. Unable Ch Unable to use proposed channel 4. If you rejected the call, select a reason for the rejection from the list. Unable mode Unable to use proposed mode Confirmation of the acceptance or rejection of the call is displayed. If you have accepted the call then the radio will re-tune to the requested channel. If the MMSI is a CSR then the radio will automatically tune to the correct Channel.
1. Select Phonebook to request the position of a contact saved in your Phonebook, or 2. Select Recent Calls to request the position of a contact that you have called recently, or 3. Select Enter MMSI to manually enter the MMSI number of the station that you want to request the position of. 4. Select a contact or enter an MMSI manually and press the OK button. The position request is sent. When a response is received the position of the contact is displayed.
• latitude and longitude (if sent with the call) • nature of distress (specified distress calls only) If the call was received from a contact in the Phonebook then the contact name is displayed, otherwise the MMSI number is displayed. Accessing the call logs Follow the steps below to access the call logs. From the DSC Calls menu: Menu > DSC Calls. 1. Select Call logs. 2. Select the log you want to view: • Unread • Distress calls • Non-distress calls • Outgoing calls • Position log 3.
Menu item Description MMSI To enable the DSC functions on your radio you must enter your unique MMSI number. Auto channel change When automatic channel change is turned on the radio will automatically re-tune after 10 seconds to the requested channel when DSC calls are received. • On (default) Position requests With Position requests set to Auto accept the radio will automatically send out position details when a position request is received.
Chapter 8: VHF operations Chapter contents • 8.1 Watch modes on page 74 • 8.2 Scan Mode on page 74 • 8.3 Priority channels on page 74 • 8.4 Sensitivity on page 74 • 8.5 Private channels on page 74 • 8.6 Automatic Transmitter Identification System (ATIS) and Marcom-C mode on page 75 • 8.7 AIS receiver on page 75 • 8.8 Set-up menu options on page 75 VHF operations 81381-3-en-US_A5_PRINT.
8.1 Watch modes Watch mode monitors priority channels and the currently selected channel. There are 2 types of watch mode; Dual watch and Triple watch or Tri watch. • Dual watch — This mode monitors priority channel 16 and the currently selected channel. • Triple watch — This mode monitors priority channel 16, the second priority channel (Channel 09 (default)) and the currently selected channel. The second priority channel can also be set to a user defined channel.
• Finland (fishing) • Holland (Netherlands) • Norway (pleasure) • Norway (fishing) • Sweden (pleasure) • Sweden (fishing) • UK Selecting a private channel set You can select the set of private channels you want to use. From the Channel set-up menu: Menu > Set-up > Channel set-up. 1. Select Private channels. The list of private channel sets is displayed: 2. Select the required private channel set. 8.
Menu Description Options Menu Description Options Menu Description Options Display set-up Provides access to the display settings menu. • Backlight Noise cancelling (Tx) Switches the transmission noise cancellation feature On and Off. • On (default) Channel set-up Provides access to the Channel set-up menu. • Channel name • Shared brightness • Contrast Language Enables selection of the user interface language.
Menu Description Options Menu Description Options Network output Enables you to select the network to be used to output and receive data. • NMEA 2000 Contrast Increases and decreases the LCD Contrast level. • 0 to 10 Homescreen display • Location & Time Enables you to switch ATIS mode on and off and enter your ATIS ID. • ATIS Determines the details displayed onscreen. Enables you to view system details and functions that may be required during maintenance and troubleshooting.
Chapter 9: Hailer, Fog horn, and Intercom Chapter contents • 9.1 Hailer Fog Intercom menu on page 80 • 9.2 Loud hailer on page 80 • 9.3 Fog horn on page 80 • 9.4 Intercom on page 81 Hailer, Fog horn, and Intercom 81381-3-en-US_A5_PRINT.
9.1 Hailer Fog Intercom menu The menu options available are determined by the accessories connected to your radio. Menu name Connected devices Hail/Fog/Int Loud hailer and second station connected. Hailer/Fog Loud hailer connected, no second station Intercom Second station connected, no loud hailer Note: For simplicity the procedures in this section all refer to the Hail/Fog/Int menu. 9.2 Loud hailer The Ray70, Ray73, Ray90 and Ray91 VHF Radios can be connected to a Loud hailer.
Switching off Fog Horn mode Automatic Fog Horn mode will remain active until switched off. From the Hail/Fog/Int menu: Menu > Hail/Fog/Int. 1. Select Fog horn. 2. Select Stop fog horn to switch off the automatic fog horn mode 9.4 Intercom The Intercom function is available when more than 1 station is connected to your radio. The intercom function allows voice communication between handset stations. Calls can be initiated from either station.
Chapter 10: Maintenance Chapter contents • 10.1 Maintenance on page 84 Maintenance 81381-3-en-US_A5_PRINT.
10.1 Maintenance This product has no user serviceable parts or adjustments. Never remove the cover or attempt to service the product, doing so may invalidate your product warranty. To following preventive measures should be followed: • Although the product is waterproof, keep the unit as dry as possible. Unit cleaning instructions The unit does not require regular cleaning. However, if you find it necessary to clean the unit, please follow the steps below: 1. Ensure power is switched off. 2.
Chapter 11: Troubleshooting Chapter contents • 11.1 Troubleshooting on page 86 • 11.2 Power up troubleshooting on page 87 • 11.3 Audio troubleshooting (transmission / reception) on page 89 • 11.4 GNSS (GPS) troubleshooting on page 91 • 11.5 DSC troubleshooting on page 92 • 11.6 AIS troubleshooting (Ray70 / 73 / 91 only) on page 93 • 11.7 Wired handset troubleshooting on page 94 • 11.8 Wireless troubleshooting (Ray63 / 73 / 90 / 91 only) on page 95 Troubleshooting 81381-3-en-US_A5_PRINT.
11.1 Troubleshooting The troubleshooting information provides possible causes and corrective action required for common problems associated with installation and operation of your product. Before packing and shipping, all Raymarine products are subjected to comprehensive testing and quality assurance programs. If you do experience problems with your product this section will help you to diagnose and correct problems in order to restore normal operation.
11.2 Power up troubleshooting Problems at power up and their possible causes and solutions are described here. Product does not turn on or keeps turning off Possible causes Possible solutions Operation 1. Ensure that the radio is fully powered on, by holding the Power button for at least 3 seconds. 2. If your system includes a handset, it has its own independent power button, located on the top edge of the handset. Press and hold the button for at least 3 seconds, until the display lights up.
Product will not boot up (re-boot loop) Possible causes Possible solutions Power supply and connection See possible solutions from ‘Products does not turn on or keeps turning off’ above. Software corruption In the unlikely event that the product’s software has become corrupted, please try re-flashing the radio and the handsets with the latest software from the Raymarine website: www.raymarine.
11.3 Audio troubleshooting (transmission / reception) Problems with your VHF radio and their possible causes and solutions are described below: No audio transmission Possible Causes Possible Solutions Incorrect settings Reset the radio to factory defaults, using the Maintenance menu: Menu > Set-up > Maintenance > System reset. Dirt or debris blocking the microphone on the fist mic or Raymic handset.
Passive speaker troubleshooting Passive speaker no alarm audio Possible Causes Possible Solutions Passive speaker connected to second station connector. Alarm audio is not available on passive speakers connected to the second station connector. Alarm audio should still be heard via the second station handset. 90 81381-3-en-US_A5_PRINT.
11.4 GNSS (GPS) troubleshooting Problems with the GNSS (GPS) and their possible causes and solutions are described below. Before troubleshooting GNSS (GPS) problems, ensure your product has the latest software, by checking the Software Updates page on the Raymarine website www.raymarine.com/software No fix Possible causes Possible solutions No GNSS (GPS) receiver connected. In order to obtain a position fix your product requires a GNSS (GPS) receiver.
11.5 DSC troubleshooting DSC functions are not available / working Possible Causes Possible Solutions MMSI number not programmed. Programme your MMSI number. Each VHF radio requires a unique MMSI number. In the United States, this MUST be programmed into the unit by an authorized dealer. For more information, refer to: Obtain MMSI (Maritime Mobile Service Identity) number Radio is set to ATIS or Marcom-C mode. Use of DSC is not permitted when in ATIS or Marcom-C mode.
11.6 AIS troubleshooting (Ray70 / 73 / 91 only) AIS functions are not available / working (Ray70 / Ray73 / Ray91 only) Possible Causes Possible Solutions MMSI number not programmed. Programme your MMSI number. Each VHF radio requires a unique MMSI number. In the United States, this MUST be programmed into the unit by an authorized dealer.
11.7 Wired handset troubleshooting Wired handset will not power up Possible causes Possible solutions Handset not turned on The Wired handset is supplied power from the Base station. Press the Power button located on the top of the Handset to power it on. If you have a handset in your system with old software, you might need to put it into programming mode in order to update the software along with the radio. To do this, connect it and then press and hold the DISTRESS and PTT buttons together.
11.8 Wireless troubleshooting (Ray63 / 73 / 90 / 91 only) Before troubleshooting problems with your wireless connection, ensure that you have followed the Wireless location requirements guidance provided in the relevant installation instructions and performed a power cycle/reboot of the devices you are experiencing problems with. Wireless handset not powering up Possible cause Possible solutions Wireless handset’s battery is not charged. 1.
Connection extremely slow and or keeps dropping out Possible cause Possible solutions Wireless performance degrades over distance, so products farther away will receive less network bandwidth. Products installed close to their maximum wireless range will experience slow connection speeds, signal drop outs or no connection at all. Move devices closer together. Interference being caused by other wireless-enabled devices. 1.
LED diagnostics - Wireless (Active) speaker Sequence Troubleshooting 81381-3-en-US_A5_PRINT.
Chapter 12: Technical support Chapter contents • 12.1 Raymarine product support and servicing on page 100 • 12.2 Viewing product information on page 100 • 12.3 Learning resources on page 101 Technical support 81381-3-en-US_A5_PRINT.
12.1 Raymarine product support and servicing Raymarine provides a comprehensive product support service, as well as warranty, service, and repairs. You can access these services through the Raymarine website, telephone, and e-mail. Product information If you need to request service or support, please have the following information to hand: • Technical support forum — http://forum.raymarine.com • Software updates — http://www.raymarine.
12.3 Learning resources Raymarine has produced a range of learning resources to help you get the most out of your products. Video tutorials Raymarine official channel on YouTube: • YouTube LightHouse™ 3 tips and tricks: • Raymarine website Video Gallery: • Raymarine website Note: • Viewing the videos requires a device with an Internet connection. • Some videos are only available in English.
Chapter 13: Technical specification Chapter contents • 13.1 Technical specification — Ray53 on page 104 • 13.2 Technical specification — Ray63 on page 105 • 13.3 Technical specification — Ray73 on page 106 • 13.4 Technical specification — Wired handset (Raymic) on page 107 • 13.5 Technical specification - Wired (Passive) speaker on page 108 • 13.6 Technical specification - Wireless hub on page 108 • 13.7 Technical specification - Wireless handset on page 108 • 13.
13.1 Technical specification — Ray53 Frequency stability +/- 1.5 ppm Channel Spacing 25 kHz Environmental specification Power Output • Low power setting — 0 . 7 5 W Operating temperature -20ºC (-4ºF) to +60ºC (140ºF) Storage temperature -25ºC (-13ºF) to +70ºC (158ºF) Spurious emissions Better than –36 dBm at 25 W (Less than 0.
Signal Acquisition Automatic Almanac Update Automatic Geodetic Datum WGS-84 (alternatives available through Raymarine MFD) Refresh Rate Antenna IPx6 & IPx7 Connections • 1 x NMEA 0183 • 1 x SeaTalkng ® / NMEA 2000 • 1 x Front Fistmic connection • 1 x Rear connection for 2nd station 10 Hz (10 times per second Concurrent GNSS) • 1 x Audio (RCA) • Internal — Ceramic chip mounted near top of unit • 1 x GNSS (GPS) antenna (TNC) • External — Passive antenna connection via TNC connector Position Accu
Geodetic Datum Speakers Base station speaker power output 2.
Power Output • Low power setting — 0 . 7 5 W • High power setting — 25 W Speakers Base station speaker power output 2.5 W (8 Ω) Operating frequency • GPS L1 C/A • GLONASS L10F • Beidou B1 Spurious emissions Better than –36 dBm at 25 W (Less than 0.
Max speaker power output 1 W (16 Ω) VHF radio compatibility • Ray90 / Ray91 • Ray63 / Ray73 • Ray60 / Ray70 13.5 Technical specification Wired (Passive) speaker Operating temperature -25ºC (-13ºF) to +55ºC (131ºF) Storage temperature -25ºC (-13ºF) to +70ºC (158ºF) Relative humidity 95% Water proofing IPx6 & IPx7 Max speaker power output 5 W (8 Ω) Connection RCA female connector, connects to Wired handset via adaptor cable (A80297) VHF radio compatibility 13.
Fuse requirements • Inline fuse = 2 A • Thermal breaker = 2 A Current consumption 1 A nominal Charge type Wireless inductive charging Power output 1A Environmental specification Operating temperature -25ºC (-13ºF) to +55ºC (131ºF) Storage temperature -25ºC (-13ºF) to +70ºC (158ºF) Relative humidity 95% Water proofing IPx6 & IPx7 Environmental specification Operating temperature -25ºC (-13ºF) to +55ºC (131ºF) Storage temperature -25ºC (-13ºF) to +70ºC (158ºF) Relative humidity 95% Water pr
Chapter 14: Spares and accessories Chapter contents • 14.1 Accessories on page 112 • 14.2 Ray53 / Ray63 / Ray73 spares on page 112 • 14.3 SeaTalkng ® cables and accessories on page 112 Spares and accessories 81381-3-en-US_A5_PRINT.
14.1 Accessories Part number Description The following accessories are available; A80544 Wireless handset including charging holster R70739 Wireless hub adaptor for Ray63/Ray73 Base station accessories Part number Description A80288 Passive GNSS (GPS) antenna M95435 Loud hailer / Fog horn Wired handset station accessories 14.3 SeaTalkng ® cables and accessories SeaTalkng ® cables and accessories for use with compatible products. Part No Description Notes T70134 Starter kit Includes: 14.
Part No Description A06041 Spur cable 5 m (16.4 ft) A06042 Elbow spur cable 0.4 m (1.3 ft) A06033 Backbone cable 0.4 m (1.3 ft) A06034 A06035 Notes Part No Description A06031 Terminator Notes A06028 T-piece Provides 1 x spur connection A06064 5–way connector block Provides 3 x spur connections A06030 Backbone extender Backbone cable 1 m (3.3 ft) E22158 SeaTalk to SeaTalkng ® converter kit Allows the connection of SeaTalk devices to a SeaTalkng ® system. Backbone cable 3 m (9.
Appendix A NMEA 0183 sentences The radio supports the following NMEA 0183 sentences.
Appendix B NMEA 2000 PGN list The radio supports the following NMEA 2000 PGNs. These are applicable to NMEA 2000 and SeaTalkng ® protocols.
Ray53 / Ray63 Receive Transmit Ray73 Receive Transmit PGN Description 129040 AIS Class B Extended Position Report 129041 AIS Aids to Navigation (AtONs) 129044 Datum ● ● ● ● 129540 GNSS Satellites in View ● ● ● ● 129542 GNSS Pseudo Range Noise Statistics ● ● ● ● 129547 GNSS Pseudo Range Error Statistics ● ● ● ● 129793 AIS UTC and Date Report ● 129794 AIS Class A Static and Voyage Related data ● 129797 AIS Binary Broadcast 129798 AIS SAR Aircraft Position Report ●
Appendix C MMSI Regulatory bodies and application submissions Country Regulatory Body UK Ofcom Website links http://www.ofcom.org.uk USA FCC (www.fcc.gov) • www.boatus.com • www.seatow.com • www.usps4mmsi.com Canada Industry Canada www.ic.gc.ca Australia Australian Maritime Safety Authority (AMSA) http://www.amsa.gov.au/mmsi/ Holland Agentschap Telecom www.agentschaptelecom.nl Belgium Belgisch Instituut voor Postdiensten en Telecommunicatie www.bipt.
Country Regulatory Body Website links Chile Directemar www.nauticentro.cl Panama Autoridad Maritima de Panama www.amp.gob.pa/newside/spanish/puertos2/depima/ima.html MMSI Regulatory bodies and application submissions 81381-3-en-US_A5_PRINT.
Appendix D VHF Channels International Marine VHF Channels and Frequencies RX Freq (MHz) Single Freq (MHz) CH No. TX Freq Use 01 156.050 160.650 Public correspondence, Port operations and Ship movement. 02 156.100 160.700 Public correspondence, Port operations and Ship movement. 03 156.150 160.750 Public correspondence, Port operations and Ship movement. 04 156.200 156.800 Public correspondence, Port operations and Ship movement. 05 156.250 156.850 06 156.300 156.300 07 156.
CH No. TX Freq RX Freq (MHz) 18 156.900 161.500 19 156.950 161.550 Single Freq (MHz) Use Public correspondence, Port operations and Ship movement. Public correspondence, Port operations and Ship movement. 1019 156.950 156.950 x 2019 161.550 161.550 x 20 157.000 161.600 Port operations and Ship movement. Port operations and Ship movement. Channel is limited to Ship stations only unless otherwise permitted by UK regulation. Public correspondence, Port operations and Ship movement.
Single Freq (MHz) CH No. TX Freq RX Freq (MHz) 27 157.350 161.950 Use 1027 157.350 157.350 x Port operations and Ship movement. x Application specific message (ASM1) Public correspondence, Port operations and Ship movement. Available for testing of new AIS applications. 2027 161.950 161.950 28 157.400 162.000 1028 157.400 157.400 x Port operations and Ship movement. x Application specific message (ASM2) Public correspondence, Port operations and Ship movement.
CH No. TX Freq RX Freq (MHz) Single Freq (MHz) 75 156.775 156.775 x Intership Navigation related communications only with 1 watt maximum power. 76 156.825 156.825 x Intership Navigation related communications only with 1 watt maximum power. 77 156.875 156.875 x Intership. Preferred intership channel. 78 156.925 161.525 Use Public correspondence, Port operations and Ship movement. 1078 156.925 156.925 x 2078 161.525 161.525 x 79 156.975 161.
CH No. TX Freq RX Freq (MHz) Single Freq (MHz) Use 1085 157.275 157.275 x For future use 2085 161.875 161.875 x For future use 86 157.325 161.925 1086 157.325 157.325 x For future use 2086 161.925 161.925 x For future use Port operations and Ship movement. Available for testing of new AIS applications. Port operations and Ship movement. Available for testing of new AIS applications. Port operations and Ship movement. HMCG — SAR and MSI broadcasts. 87 157.375 157.
Private Channels (Europe only) Country Channel Designations TX Freq RX Freq Channel Use Belgium 96 162.425 162.425 Marina Denmark L1 155.500 155.500 Pleasure L2 155.525 155.525 Pleasure L1 155.500 155.500 Pleasure L2 155.525 155.525 Pleasure L3 155.650 155.650 Pleasure 31 157.550 162.150 Marina 37 157.850 157.850 Leisure F1 155.625 155.625 Fishing F2 155.775 155.775 Fishing F3 155.825 155.
(New) CH No. (Old) CH No. TX Freq (MHz) RX Freq (MHz) Single Freq Use 1007 07A 156.350 156.350 x Commercial. VDSMS. 08 08 156.400 156.400 x Commercial (Intership only). VDSMS. 09 09 156.450 156.450 x Boater calling. Commercial and Non-commercial. VDSMS. 10 10 156.500 156.500 x Commercial. VDSMS. 11 11 156.550 156.550 x Commercial. VTS in selected areas. VDSMS. 12 12 156.600 156.600 x Port operations. VTS in selected areas. 13 13 156.650 156.
(New) CH No. (Old) CH No. TX Freq (MHz) RX Freq (MHz) Single Freq Use 1021 21A 157.050 157.050 x US Ship Guard only. 1022 22A 157.100 157.100 x Ship Guard Liaison and Maritime Safety Information Broadcasts. 1023 23A 157.150 157.150 x 24 24 157.200 161.800 Public correspondence (Marine operator). 25 25 157.250 161.850 Public correspondence (Marine operator). 26 26 157.300 161.900 Public correspondence (Marine operator). 27 27 157.350 161.
(New) CH No. (Old) CH No. TX Freq (MHz) RX Freq (MHz) Single Freq Use 1078 78A 156.925 156.925 x Non-commercial. VDSMS. 1079 79A 156.975 156.975 x Commercial. Non-commercial in Great Lakes only). VDSMS. 1080 80A 157.025 157.025 x Commercial. Non-commercial in Great Lakes only). VDSMS. 1081 81A 157.075 157.075 x US Government only — Environmental protection operations. 1082 82A 157.125 157.125 x US Government only. 1083 83A 157.175 157.175 x US Ship Guard only.
Note: 1. Four digit channels indicate simplex use of the ship station transmit side of an international semi-duplex channel. Operations are different from that of international operations on that channel. 2. Channel 13 should be used to contact a ship when there is danger of collision. All ships of length 20 metres or greater are required to guard VHF channel 13, in addition to VHF channel 16, when operating within US territorial waters. 3. Channel 15 is receive only. 4.
(New) CH No. (Old) CH No. TX Freq (MHz) RX Freq (MHz) Single Freq Areas of operation 1005 05A 156.250 156.250 x AC, BCC, EC, GL, NL, INLD BC, WC Ship movement. 06 06 156.300 156.300 x All areas Intership, Commercial, Non-Commercial and Safety Maybe used for search and rescue communications between ships and aircraft. 1007 07A 156.350 156.350 x AC, BCC, EC, GL, NL, INLD BC, WC Intership, Ship/Shore and Commercial. 08 08 156.400 156.
(New) CH No. (Old) CH No. TX Freq (MHz) RX Freq (MHz) Single Freq 1018 18A 156.900 156.900 x AC, BCC, EC, GL, NL, INLD BC, WC Intership, Ship/Shore and Commercial. Towing — BCC area. 1019 19A 156.950 156.950 x All areas Intership and Ship/Shore. DFO / Canadian Ship Guard. Pacific Pilots — BCC area. 20 20 157.00 161.600 AC, BCC, EC, GL, NL, INLD BC, WC Ship/Shore, Safety and Ship movement. Port operations only with 1 watt maximum power. 1021 21A 157.050 157.
(New) CH No. (Old) CH No. TX Freq (MHz) RX Freq (MHz) Single Freq Areas of operation 1061 61A 156.075 156.075 x BCC Intership, Ship/Shore and Commercial DFO / Canadian Ship Guard only in BCC area. Commercial fishing only in EC area. 1062 62A 156.125 156.125 x BCC, EC Intership, Ship/Shore and Commercial DFO / Canadian Ship Guard only in BCC area. Commercial fishing only in EC area. 156.175 156.175 x BCC Intership, Ship/Shore and Commercial. Tow boats — BCC area. 156.225 160.
(New) CH No. (Old) CH No. TX Freq (MHz) RX Freq (MHz) Single Freq Areas of operation 73 73 156.675 156.675 x All areas Intership, Ship/Shore, Safety, Commercial and Non-commercial. May also be used for communications with aircraft engaged in coordinated search and rescue and antipollution operations. Commercial fishing only in EC and INLD PRA areas. 74 74 156.725 156.725 x BCC, EC Intership, Ship/Shore, Commercial, Non-commercial and Ship movement. VTS and Ship movement — BCC area.
(New) CH No. (Old) CH No. TX Freq (MHz) RX Freq (MHz) 85 85 157.275 161.875 86 86 157.325 161.925 87 87 157.375 157.375 x 88 88 157.425 157.425 x Single Freq Areas of operation Use AC, BCC, GL ,NL Ship/Shore and Public correspondence. BCC Ship/Shore and Public correspondence. AC, BCC, GL, NL Intership, Non-commercial and Ship movement. Port operation and ship movement — EC area. Pleasure craft — BCC area. AC, BCC, GL, NL Intership, Commercial and Ship movement.
Appendix E Phonetic alphabet To help make call letters more clearly understood, and to assist in spelling out similar sounding or unfamiliar word, radiotelephone users employ the international phonetic alphabet.
Appendix F Prowords Proword Meaning ACKNOWLEDGE Have you received and understood? CONFIRM Is that correct? CORRECTION An error has been made? I SAY AGAIN I repeat (e.g. important information). I SPELL Phonetically spelling of the word. OUT End of communication. FCC Compliance Notice This device complies with part 15 of the FCC Rules.
Index $ Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Wired . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Additional components . . . . . . . . . .
Product holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30–31 DSC set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 ( Electromagnetic Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 EMC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Where to apply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 MMSI number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Bracket . . . . . . . . . . . . . . . . . . . . . . . . . .
Software version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Specification Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Charger . . . . . . . . . . . . . .
Raymarine Marine House, Cartwright Drive, Fareham, Hampshire. PO15 5RJ. United Kingdom. Tel: +44 (0)1329 246 700 www.raymarine.com a brand by 81381-3-en-US_A5_PRINT.