User's Manual

Rhein Tech Laboratories, Inc. Client: FlightScope (Pty) Ltd

360 Herndon Parkway Model: X2 ELITE

Suite 1400 Standards: FCC 15.245/IC RSS-210

Herndon, VA 20170 FCC/IC ID: QXP-HP2441/4612A-HP244

http://www.rheintech.com Report #: 2014207

Page 26 of 31

Appendix K: Manual

Please refer to the following pages.

PAGE 1
Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Appendix K: Client: FlightScope (Pty) Ltd Model: X2 ELITE Standards: FCC 15.245/IC RSS-210 FCC/IC ID: QXP-HP2441/4612A-HP244 Report #: 2014207 Manual Please refer to the following pages.
PAGE 2
FlightScope® X2 Elite User Guide FCC Statement: Changes or modifications not expressly approved by FlightScope (Pty) Ltd could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in an office or residential installation.
PAGE 3
First time use 1. Note the X2’s serial number e.g. “X2E-00179”. 2. Switch the FlightScope on with no cable connected. 3. On the PC, set up a Wireless Network, e.g. right-click the Wi-Fi icon on the toolbar, Scan for available networks and Connect to the displayed FlightScope X2E-##### unit 4. The FlightScope Wi-Fi requires a password. These are the same 9 characters as the X2 serial number e.g. X2E-00179. Use a capital “X” and include the dash (-) character.