flight of harmony Eurorack Module ~rev1.
Components 1 Assembled POWER module 1 13” 18AWG DC power harness 4 M3x0.5x6mm Stainless-Steel machine screws 4 M3 Nylon washers Specifications Module width 10 h.p. Input voltage 12VAC IV+= 1A Maximum current output IV-= -1A ±12VDC Output voltage What is it? This one is pretty straightforward: a power supply for your modular synthesizer rig. No sweet spots, no easter eggs, it just makes juice.
Usage The standard AC wall adapter (if you purchased the standard unit) is rated for 1 Ampere (A. K. A. 1 Amp, 1A, 1000mA), as is the POWER module itself. For best performance – and this applies to ALL electronics, by the way – you should never run POWER at its maximum rating. A 60% load (600mA) is the practical limit for best performance. If you need/want to run it up to 75% or 80%, a greater capacity adapter is needed to maintain performance.
Stuff There is a lot of discussion about POWER on the Muffwiggler forums, come check it out! People have posted some excellent examples on there. I haunt the forums as well, and new things are posted there long before they hit the f(h) web site. http://www.muffwiggler.com/forum/index.php A big thank you to those who have sent in suggestions and comments, keep them coming! Send samples to: samples@flightofharmony.com Comments, suggestions, complaints to: flight@flightofharmony.
