Assembly Instructions

A
Small screw
Flat washer
Table top
Center plate
Table leg
Parts list Parts picture Description
Q'ty
Parts list Parts picture Description
Q'ty
1. Turn the table top(A) upside down on the soft clean surface. Loosely attach the small screws(D) to the table top.
Tighten the screws at this time. Leave enough play for assembly those table plates.
2. Loosely attach the legs(C) to the table top with flat washers(E), lock washers(F),nuts(G)and nut caps(H). DO NOT
tighten the nuts.
3. Turn the center plate(B) upside down on the soft clean surface. Loosely attach the bolts to the center plate. Loosely
attach the center plate to the legs. NOTE that the recessed end of plate goes on the leg last at each corner. Secure using
big screws(I), flat washers, lock washers, nuts.
4. Tighten all the bolts and nuts completely. DO NOT over tighten the bolts and nuts.
5. Turn the table onto its legs and use the adjuster feet to level the tables.
1. Please read these instructions carefully before assembly.
2. Aluminum is soft metal over tighten may strip thread or break the part.
3. DO NOT use power tools.
4
1
1
4
8
8
4
B
C
D
E
F
G
H
Lock washer
Nut
Nut cap
8
ASSEMBLY INSTRUCTIONS
22
33
11
A
D
C
F
E
G
44
4
I
Big screw
H
B
I
Warning : please do not use acid or alkaline washing liquid to clean the product.
ATTENTION:
Assembly step:
(M8*35)
(M8*35)