User Manual

ManualsBrandsFlaircomm Technologies ManualsElectronicsBluetooth Multi-mode AV Adapter

Flaircomm Technologies Inc.

AV Adapter User Manual

Model：BlueTone™BTAV201

Declaration:

Without written permission from original manufacturer, reproduction, transfer, distribution or storage of

part or all of the contents in this document in any form is prohibited.

The company reserves rights to make any changes and improvements to the product described in this

document without prior notice.

- 1 -

Address: No.5 Bibo Road, Keyuan Building, 4F, Zhangjiang Hi-Tech Park, Shanghai 201203, P.R.China

Telephone: 86-21-51088733 Fax: 86-21-50276101

www.flaircomm.com

Summary of content (6 pages)

PAGE 1
Flaircomm Technologies Inc. AV Adapter User Manual Model：BlueTone™BTAV201 Declaration: Without written permission from original manufacturer, reproduction, transfer, distribution or storage of part or all of the contents in this document in any form is prohibited. The company reserves rights to make any changes and improvements to the product described in this document without prior notice. -1Address: No.5 Bibo Road, Keyuan Building, 4F, Zhangjiang Hi-Tech Park, Shanghai 201203, P.R.
PAGE 2
Flaircomm Technologies Inc. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 3
Flaircomm Technologies Inc. ------ Introduction ----------------------------------------------Bluetooth Technology Bluetooth is an internationally standardized technology supporting short distance wireless communications. Any two Bluetooth-compatible equipments, such as mobile phone, PDA、PC, headset, mouse, keyboards, printer, etc. can wirelessly communicate with each other via Bluetooth connection.
PAGE 4
Flaircomm Technologies Inc. 1. On/off, to turn on/off the device. 2. Pair, to activate the paring mode of the device. 3. Receive/Transmit 4. Reset 5. 8-pin USB port, to connect the charging cable or line-in/line-out cable. 6. Red LED, to indicate that the device is in transmitter mode or in charging mode. 7. Blue LED, to indicate that the device is in receiver mode. Accessory There is a multifunctional connecting cable in the package (referring to Figure 2).
PAGE 5
Flaircomm Technologies Inc. When the adapter is power on, the red LED blinks five times per second in transmitter mode, and the blue LED blinks once every two seconds in receiver mode. Turning off When the adapter is power on, press and hold button On/off for at least three seconds, and the LED will be off. This indicates the adapter is power off. Mode Choosing This AV adapter is a multi-mode adapter. It can be used in either transmitter mode or receiver mode.
PAGE 6
Flaircomm Technologies Inc. Note Before pairing or connecting, you must choose the right mode for the adapter. It is recommended to choose the mode when the adapter is power off. Otherwise, the adapter will turn off after the mode is set and you have to turn it on again. Pairing Short press button Pair. If the LED blinks five times per second, it is an indication that the adapter has successfully entered the pairing mode.