Product Manual

1
Product Manual
1. Autonomous recharge
FJ DYNAMICS disinfection robot is capable of autonomous recharge. When the two
conditions below are met, the robot will autonomously return to the charging pile for
charging (please ensure that the charging pile is fixed in place and powered on):
 Battery level of the robot is below 20%.
 The robot is not working, and battery level is below 100%.
2. Charge the robot manually
1. Match the remote control to the robot.
2. Push the robot to the charging pile manually.
3. Aim the back of the robot at the charging pile; then push the robot for the charging
connectors of the robot and the charging pile to contact; finally, click “Return now”
on App. The charging pile status indicator will flash red and green light alternatively
to indicate that charging has begun.
3. Charge through the adapter
When the robot cannot be turned on normally due to battery depletion, it can be
charged with the charging pile adapter following the steps below:
1. Turn off the power of the robot.
2. Detach the rear panel from the charging pile with a screwdriver, pull out the
charging plug of the charging pile adapter, screw out the lid on the manual charging
port, and insert the charging plug of the charging pile adapter into the manual
charging port.