Operation Instruction for Vi s i o n - b a s e d O b s t a c l e Av o i d a n c e M o d u l e F J D Z4 2 P - V M Applicant：FJ Dynamics Co.,Ltd. Manufacturer：FJ Dynamics Technology （Fujian）Co., Ltd.
Operation Instruction for visual obstacle avoidance module Safety Precautions................................................................................................. 1 Product Introduction................................................................................................ 2 Product Specifications ............................................................................................. 3 Device Installation ............................................................................
Operation Instruction for visual obstacle avoidance module Safety Precautions Routine Please read the operation instruction before the installation, adjustment, inspection and maintenance of the vision-based obstacle avoidance module and other work. Improper installation and operation may lead to serious injury, for which the manufacturer shall assume no responsibility. The visual obstacle avoidance module must be matched with the corresponding gateway; otherwise it cannot be used normally.
Operation Instruction for visual obstacle avoidance module extrusion and hitting. Please keep the visual obstacle avoidance module away from fire! Product Introduction The vision-based obstacle avoidance module can judge whether there is an obstacle in a certain distance ahead through the camera in real time, and report the judgment date to the host through the network.The host can make decisions to avoid obstacles such as braking or steering according to the data.
Operation Instruction for visual obstacle avoidance module Product Specifications Visual obstacle avoidance module FJDZ42P-VM Model ⎓1.5A 12V POWER Size of clump weight (length*width*height) 1082 x 1356 x 67 (mm) Protection grade IPx4 Communication mode 5G WiFi Communication distance ≤0.8km (depending on the specific coverage and building conditions) 1. Structural member 2. Vision-based obstacle avoidance BOX 3.
Operation Instruction for visual obstacle avoidance module Device Installation 1. Below is the network connection method: 2.Install and fix the FJDZ42P-VM on the vehicle. 3.Connect the power cable to the power supply port and connect the power supply port. 4.Connect the network cable to the module and the host computer. 5.When it is powered on, the module will judge whether there is an obstacle in a certain distance ahead and send fixed format information to the upper computer. 6.
FCC statements NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
