WELCOME Thank you for choosing FITURE For any technical support, please visit www.fiture.com or send email to hello@fiture.
IMPORTANT REMINDERS IMPORTANT REMINDERS NOT SUITABLE FOR Please read all warnings, precautions and instructions in this manual before using the product. Improper usage or maintenance can void the warranty. Please follow fiture.com/manuals for the latest version of the manual. SAFETY WARNING please unplug your product and contact FITURE Customer Service.
IMPORTANT REMINDERS IMPORTANT REMINDERS PRODUCT MAINTENANCE AND CARE PRODUCT MAINTENANCE AND CARE OTHERS frequency of exercise, avoid Iong-term, high-intensity, and highfrequency exercise that exceeds your own load capacity to avoid Do not wipe the surface of the product with chemical solutions which may cause permanent damage to its appearance.
PRODUCT SPECIFICATION Dimensions PRODUCT FEATURES Display Size: 43" Resolution: 1920*1080 Aspect ratio: 9:16 Operating environment Speaker Rated power: 10 W Quantity: 2 Audio and Thickness: 40 mm Operating temperature: 0-45° Operating altitude: 0-5000 m Input:120V AC Volume + video formats Height: 1732 mm Supported video format:H264, H265, MPEG*1/2/4, WMV, etc. Supported audio format: MP3, AAC, WMA, PM, FLAC, etc.
PRODUCT CONTENTS INSTALLATION WALL MOUNTING INSTALLATION For wall mounting installation, a wall mounting bracket must be purchased separately. Please contact FITURE Customer Service if you need it and follow the installation SOPs in the wall mounting kit. FITURE assumes no responsibility for product damage or personal injury caused by improper installation. Power cord 1 Piece User manual 1 Copy Cleaning cloth 1 Piece WALL LEANING INSTALLATION 1.
INSTALLATION GETTING STARTED WALL LEANING INSTALLATION 3. Hammer the wall anchor into the hole and make sure it fits tightly into the hole. Fasten the bushing to the wall with the wall anchor screw and make sure it is tightened. 4. Connect the power cord into the FITURE and secure it with the cable holder. 5. Place the FITURE against the wall and ensure that the distance between the stand and the wall is 250 mm, and fasten the safety buckles on the back of the body with the bushing. 6.
GETTING STARTED 12 RESET 4. Standby mode FITURE will automatically enter standby mode if it is idle for a set time. You can 5. Wake up the FITURE When FITURE is in standby mode, you can wake it up by either connecting it to also enter the standby mode by short press 'Power’. the FITURE App or pressing 'Power’. 6. Power off Press and hold 'Power’ to turn it off. 1. Network reset Press and hold 'Power' and ‘Volume +' simultaneously to reset its network. 2.
14 DISCLAIMER NOTICE In order to protect users' legal rights and interests, please read through the User Manual and the disclaimer before use, and follow this User Manual to operate the product. By using the product, you have read, understood, acknowledged and accepted all the terms and conditions of the User Manual and the disclaimer. The user is responsible for their own behaviors and all consequences arising therefrom.
LIMITED WARRANTY SCREEN, FRAME AND HARDWARE COMPONENTS:12 MONTHS EXCLUSIONS AND LIMITATIONS Fiture Holding LLC ("FITURE", "we", or "us") extends the following Limited Warranty (the "Limited Warranty") to you, a consumer who has purchased our new FITURE product ("FITURE Product"). This Limited Warranty covers only you and applies only to your non-commercial, in-home, indoor use of the FITURE Product, subject to the exclusions and limitations below.
EXCLUSIONS AND LIMITATIONS Damage or equipment failure due to accident, abuse, improper or abnormal use, neglect, corrosion, discoloration of paint or plastic (or any other change in cosmetic appearance that does not affect performance), theft, vandalism, fire, flood, wind, lightning, freezing or other natural disasters or acts of God of any kind, electrical wiring, power reduction, power fluctuation or power failure from whatever cause, unusual atmospheric conditions, collision, introduction of foreign obj