User's Manual

PROPRIETARY

RF Module

User Guide

Doc Number: 930-00004-01

Proprietary Information

Revision History

DATE REVISION DESCRIPTION AUTHOR

8/04/2007 01 Initial release Steven Oliver

8/13/2007 02 FCC modifications John MacLean

Approvals

The information contained in this document is the sole property of FitSense Technology. Any

reproduction in part or whole without the written permission of FitSense Technology is

prohibited.

FitSense Technolog

PAGE 1
PROPRIETARY FitSense Technology RF Module User Guide Doc Number: 930-00004-01 Proprietary Information Revision History DATE REVISION 8/04/2007 01 8/13/2007 02 DESCRIPTION Initial release FCC modifications AUTHOR Steven Oliver John MacLean Approvals The information contained in this document is the sole property of FitSense Technology. Any reproduction in part or whole without the written permission of FitSense Technology is prohibited.
PAGE 2
DOC #: 930-00004-01 RF MODULE REVISION: 02 1 User Guide 1.1 Introduction: The RF Module (RFM) enables any PC based product with a USB port to provide wireless communication between FitSense Sensors. 1. Installation: Installaton and Serviceing is only to be performed by a qualified technician trained by FitLinxx in the installation of this module. 1. Locate the USB port on the Equipment. 2. Install the RF Module USB cable in to the USB port. 3.
PAGE 3
RF MODULE 1.3 DOC #: 930-00004-01 REVISION: 02 Operation: The RF Module will transmit RF packets to FitSense Test Equipment called the Wirless Sensing Module. When you run the program WSM.exe on the Personal Computer the RF Module is connected to, all the LEDs on the WSM will light up showing the RF module is transitting and receiving. 1.4 Regulatory: This device complies with Part 15 of the FCC Rules.