User Manual Model FB205
Table of Contents Getting started .............................................................................................................................................1 What’s included .......................................................................................................................................1 What’s in this document ......................................................................................................................1 Setting up Fitbit Flyer ..............
Materials .................................................................................................................................................. 16 Wireless technology ........................................................................................................................... 16 Battery ..................................................................................................................................................... 16 Size .......................................
Getting started Welcome to Fitbit Flyer, the wireless headphones designed for workouts which pack crisp sound and powerful bass into a comfortable, sweat-proof, and secure design. Take a moment to review our safety information at http://www.fitbit.com/safety.
Setting up Fitbit Flyer You must connect Flyer to a Bluetooth®-enabled device. After connecting Flyer, you’ll be able to play audio and receive phone calls through your headphones. Powering on To power on Flyer, press and hold the Power button until the LED lights up. If Flyer does not turn on, it may need to be charged first. For instructions, see Charging Flyer. Connecting to devices To pair Flyer to a device, you must put the headphones in pairing mode, indicated by a pulsing blue light.
The first time you turn on Flyer, it will automatically be in pairing mode, and you can skip to step 2. To pair Flyer to a new device: 1. Press and hold the Power button for 4 seconds when turning on Flyer, and wait until the LED pulses blue. If you release the Power button before Flyer is in pairing mode, Flyer turns on, but won’t pair to your device. If Flyer doesn’t enter pairing mode, turn it off by holding the power button for 1 second, and try this step again. 2.
To pair Flyer to Ionic: 1. 2. 3. 4. On Ionic, open the Settings app. Tap Bluetooth. Tap + New Device. When Ionic finds Flyer, tap Flyer on the screen to pair the headphones to Ionic. When pairing is complete, a green checkmark appears on Ionic’s screen and an audio notification plays through Flyer. In the future, Flyer automatically attempts to connect to Ionic if it's nearby the headphones when you turn them on. To allow the two devices to connect, turn on Ionic’s screen to wake it up.
Language selection is only available while your audio is paused and you are not on a phone call. The supported languages, in order, are: 1. 2. 3. 4. 5. 6. 7. 8. 9.
Customizing your fit Flyer comes with ear tips, wings, and fins. Attach the ear tips and either wings or fins before inserting the headphones into your ears to ensure a secure, comfortable fit. Choosing ear tips For optimal comfort and sound quality, you should select an ear tip that fits snugly in your ear canal. Flyer comes with 3 sizes (small, medium, and large) of ear tips; we recommend trying all 3 options to see which size works best for you.
To attach a wing or fin: 1. Slide the bottom edge of the wing or fin into the rounded slot of the earbud. 2. Press down on the top of the wing or fin to insert it under the metal cap. It snaps into place when inserted correctly. To remove a wing or fin, pinch the base of it between your fingers and pull away from the earbud to slide it out of the rounded slot. NOTE: If the headphones don’t tuck into your ears correctly, try switching the right and left fins.
Wearing your headphones After you select the correct attachments, we recommend wearing Flyer behind your neck with the controls on the right side. Tighten the sliding cable fastener to keep the headphones secure. For more information on finding the best fit and wearing Flyer, see help.fitbit.com.
Using the controls Flyer has 3 buttons, located on the control box. Use these buttons to control your audio and phone calls. Volume Use the Up and Down buttons to control the volume of audio and phone calls, as shown in the table below.
phone call. For instructions on accessing your phone’s voice assistant, see the table below. Function Turn on voice assistant Turn off voice assistant Operation Press and hold the Select button Press and hold the Select button Once you turn on a voice assistant, the microphone in Flyer picks up your voice, allowing you to use it as if you were speaking directly into your phone. For more information about accessing a voice assistant with Flyer, see help.fitbit.com.
Audio playback To listen to audio, press play on the device Flyer is connected to. After the audio starts, use Flyer to control it, as shown in the table below. Function Pause/resume Next track Previous track Operation Press the Select button Press and hold the Up button or double-press the Select button Press and hold the Down button or triple-press the Select button Phone calls If Flyer is connected to a phone, use Flyer to answer, dismiss, or switch between calls.
Battery life and charging Checking your current battery level When you turn Flyer on or off, you’ll see the battery-level indicator light and hear an audio notification. While Flyer is on, check the current battery level at any time by briefly pressing the Power button.
On many devices, Flyer’s battery level is shown on the connected device. If Flyer is connected to Ionic, you can check the battery level on the watch’s shortcut screen (swipe right from the clock screen). When the battery level is Low or Very Low, the LED changes to red and a voice prompt notifies you that the battery is low. For information on what the color of the LED represents, see the table below.
Erase Flyer Erase Flyer to clear all paired devices from memory and set the language for voice prompts and notifications to English. To erase Flyer, press the following buttons in this order: 1. 2. 3. 4. 5. 6. Up Down Up Down Up Select When the erase is complete, the LED flashes white 5 times and Flyer turns off.
Wear and care Flyer may require occasional cleaning. For instructions and more information, see https://www.fitbit.com/productcare. Ear tips, wings, and fins Remove the ear tips and wings or fins from the device and wash them with water or a wet cloth. Use water only. Allow them to dry completely before reattaching them to the headphones. Fitbit Flyer Clean the headphones with a soft, damp cloth. Use water only.
Fitbit Flyer General Info & Specifications Materials Flyer is made of a combination of silicone, polycarbonate, polyurethanes, elastomers, and aluminum. These materials allow the headphones to be flexible, durable, and lightweight. Wireless technology Flyer contains a Bluetooth 4.2 transceiver. Battery Flyer contains a rechargeable lithium-ion battery. Size Fitbit Flyer Weight Cord Length 0.7 oz (20 g) 29.
-22° to -4° F (-30° to -20° C) Non-Operating Temperature 113° to 140° F (45° to 60° C) Water Resistant Splash-proof. Do not submerge in water. Warning To prevent possible hearing damage, do not listen to audio at high volume levels over an extended period. Don’t attempt to replace batteries yourself—you may damage the batteries, which could cause overheating and injury Learn more Troubleshooting and assistance for Flyer may be found at help.fitbit.com.
©2017 Fitbit, Inc. All rights reserved. Fitbit and the Fitbit logo are trademarks or registered trademarks of Fitbit in the US and other countries. A more complete list of Fitbit trademarks can be found at http://www.fitbit.com/legal/trademark-list. Third-party trademarks mentioned are the property of their respective owners.
