T4256 www.fisher-price.
Important! DANGER To prevent electric shock, do not immerse in water; wipe clean with damp cloth. WARNING To prevent strangulation with power cord, never place transmitter (camera) within reach of child. CAUTION This product cannot replace responsible adult supervision.
Important! • Fully charge the camera and parent unit (each with a battery pack installed) for four hours before first-time use. • For proper setup and use, please read these instructions. • Please keep this instruction sheet for future reference, as it contains important information. • Camera operates on AC current (use enclosed docking station) or 6V NiMH rechargeable battery pack (included). Parent unit operates on AC current (use enclosed AC adaptor/charger) or 3.
Features 3 4 1 5 2 Parent Unit 11 4 9 8 7 6 10 Side View Back View 4
Features 1 Power Button and L.E.D. – Press to turn parent unit power ON or OFF. The power button lights when parent unit power is ON. 2 On-Screen Menu Bar – Displays the parent unit battery indicator and nap timer. Flip to vertical view to see the battery indicators for both the parent unit and camera, nap timer, clock and range. 3 2.4" Video Screen 4 Sound Lights – Let's you "see" baby's sounds. 5 Internal Antenna – For best reception, do not block the internal antenna.
Features 16 15 14 13 16 Camera 6
Features 12 Camera Lens 13 Power Button and L.E.D. – Press to turn camera power ON or OFF. The power button lights when camera power is ON. 14 Microphone 15 Night Vision L.E.D.s 16 Docking Station – Use to charge the camera battery.
Wall Mount Parts Wall Mount Bracket Cord Wrap Fasteners Shown Actual Size Wall Anchor – 4 #8 x 2" Screw – 4 8
Charging the Battery (Inside the Camera) IMPORTANT! Fully charge the camera (with battery pack inside) for four hours before first-time use. • Fit the camera into the docking station. • Plug the docking station power cord into a standard wall outlet. Notes: If power flow to the wall outlet is controlled by a switch, make sure the switch is “ON”. Use the docking station power cord only in a wall outlet. Do not plug the docking station power cord into a ceiling outlet.
Charging the Battery (Inside the Parent unit) IMPORTANT! Fully charge the parent unit (with battery pack inside) for four hours before first-time use. DC Input Jack • Use only the included AC adaptor/charger! Do not use any other adaptor/charger. • Fit the AC adaptor/charger pin into the DC input jack on the parent unit. • Plug the AC adaptor/charger into a standard wall outlet. Notes: If power flow to the wall outlet is controlled by a switch, make sure the switch is “ON”.
Testing Sound/Video Reception Test camera transmission and parent unit reception before installing the wall mount bracket and cord wrap (if used) and each time you change location of use. Camera Power Button Radio • Place the camera in the room where you intend to use it. • Point the camera toward the area you will be monitoring. Adjust the camera angle by rotating the camera up or down. • If using AC power, fit the camera into the docking station and plug the power cord into a wall outlet.
Testing Sound/Video Reception Internal Antenna Parent Unit Power Button Sound Lights • Place the parent unit in the room where you intend to use it. • Press the power button on the front of the parent unit to turn power ON. The button lights. • Adjust the parent unit orientation or location for best reception. • When sound is picked up by the parent unit, the sound lights will turn on. - One or two lights indicate quieter sounds. - Three or more lights indicate louder sounds.
Camera Wall Mount Installation WARNING To prevent strangulation with power cord, never place transmitter (camera) within reach of child. IMPORTANT! Test the reception of the monitor before installing the wall mount bracket and cord wrap. Use the assistance of one adult to hold the camera against the wall in the spot you want to install it. Then, test the reception of the parent unit in several locations around your house. Please refer to the Testing Sound/Video Reception section of these instructions.
Camera Wall Mount Installation 6 ft. • To provide the greatest viewing range, we recommend you install the wall mount bracket at least six feet from the floor. • Make sure the camera lens does not have an obstructed view of your baby. Adjust the camera up or down. • Allow adequate ventilation of the camera when mounted. Do not mount the camera above heating vents or other heat producing sources. Do not mount the camera where it can receive direct sunlight.
Camera Wall Mount Installation 1 Wall Mount Bracket • Hold the wall mount bracket against the wall in the location you want to install it. Make sure the wall mount bracket is straight. • Using a pencil, make a mark on the wall inside the upper hole and lower hole on the wall mount bracket. • Set the wall mount bracket aside. 2 • Using a ¼" drill bit, drill one hole through each pencil mark you made on the wall.
Camera Wall Mount Installation Wall Anchor 3 • Fit a wall anchor into each of the drilled holes. • Tap each wall anchor lightly with a hammer until the ends of each wall anchor are even with the surface of the wall. 4 • Align the holes on the wall mount bracket with the wall anchors. • Insert two screws into the holes in the wall mount bracket and tighten with a Phillips screwdriver. Do not over-tighten.
Camera Wall Mount Installation Wall Mount Bracket Cord Wrap 5 • Position the cord wrap against the wall, so that it is centered below the wall mount bracket and as close to the floor as possible. • Move the cord wrap approximately ½" towards the wall outlet. • Using a pencil, make a mark on the wall inside both holes in the cord wrap. • Set the cord wrap aside.
Camera Wall Mount Installation 6 • Using a ¼" drill bit, drill one hole through each pencil mark you made on the wall. Wall Anchor 7 • Place a wall anchor into each of the drilled holes. • Tap each wall anchor lightly with hammer until the ends of each wall anchor are even with the surface of the wall.
Camera Wall Mount Installation Cord Wrap 8 • Align the holes on the cord wrap with the wall anchors. • Insert two screws into the holes in the cord wrap and tighten with a Phillips screwdriver. Do not over-tighten. Camera Docking Station 9 • Fit the camera into the docking station. • Slide the camera docking station into the wall mount bracket.
Camera Wall Mount Installation IMPORTANT! Make sure there is no slack in the cord. Use the cord wrap. Groove Lever Cord Wrap 10 IMPORTANT! Make sure the cord is taught between the camera docking station and cord wrap. Excess cord can form loops or extend into the crib and present a strangulation hazard. • Extend the docking station power cord straight down the wall to the cord wrap. • Wrap the docking station power cord around the cord wrap, leaving just enough to reach the wall outlet.
Setup/On Screen Displays Main Menu • First, turn both the camera and parent unit power ON. Then press the settings/menu button on the parent unit to see the main menu. Note: The first time you turn on the parent unit you will see the main menu. Use the instructions in this section to set up the parent unit. You can also open the settings/menu at any time to adjust these settings. • Press the volume up or down buttons to scroll through menu options. As you scroll, the menu choices highlight on the screen.
Setup/On Screen Displays Brightness • Press volume buttons to adjust the brightness on the screen. • Press the settings/menu to the main menu. • Press volume settings/menu button to make your selection and return buttons to scroll to the exit icon button to exit the menu screen. . Press the Contrast • Press volume buttons to adjust contrast on the screen. • Press the settings/menu to the main menu.
Setup/On Screen Displays Set Clock - AM/PM Format • Press the volume or buttons to scroll to AM/PM. • Press the settings/menu button to confirm your selection. • Press the volume or buttons to set the hour. Press the settings/menu button to confirm the selection. • Press the volume or buttons to set the minutes. Press the settings/menu button to confirm the selection. • Press the volume or buttons to set AM or PM. Press the settings/menu button to confirm the selection.
Setup/On Screen Displays Set Clock - 24 Hour Format • Press the volume or buttons to scroll to 24-hour clock format. • Press the settings/menu button to confirm your selection. • Press the volume or buttons to set the hour. Press the settings/ menu button to confirm the selection. • Press the volume or buttons to set the minutes. Press the settings/menu button to confirm the selection. • Press the volume or buttons to scroll to the exit icon and press the settings/menu button to exit the menu screen.
Setup/On Screen Displays Voice Activated You can set the parent unit to voice activated mode to conserve battery power or for night time use. If the video screen is turned off and baby makes noise, the video screen automatically turns back ON. It will remain on for 30 seconds and then turn OFF after the last sound detected. You can also press any button on the parent unit to turn the video screen back ON. Video screen does not automatically turn ON when baby makes noise.
On Screen Displays Range • The number of bars indicates signal strength. Note: The range, clock and battery indicators only appear when the parent unit is in a vertical view. Out of Range • The out of range warning will flash on the video screen and you will hear a tone when the parent unit is out of range or the camera is turned off.
On Screen Displays Battery Indicators Notes: The number next to the on-screen battery indicator corresponds to the number on the back of the parent unit and camera. Both battery indicators are only visible when the parent unit is in a vertical view. When the parent unit is in a horizontal view, only the parent unit's battery indicator displays. Indicates parent unit/camera is using battery power. Indicates battery power is low (and you will hear a tone).
Use IMPORTANT! Test the sound and video reception of the monitor before first time use and whenever you change the location of the camera (see Testing Sound/Video Reception section of these instructions). • Place the camera in the same room with child. Position the camera lens so it is facing child. For the best viewing range, the camera should be approximately six feet away from baby. • To use AC power, fit the camera into the docking station. • Plug the power cord into a standard wall outlet.
Use • To use AC power with the parent unit, unwrap and fully extend the AC adaptor/charger (for best reception). Insert the AC adaptor/charger pin into the DC input jack on the parent unit and plug into a standard wall outlet. • Press the power button on the parent unit to turn the power ON. • Press the volume buttons to turn the parent unit volume up or down . • To monitor baby without video, press the display button at the top of the parent unit. To turn video back on, simply press the button again.
Night Vision Mode When the light in baby’s room is too low, the camera will automatically switch to night vision mode. The moon icon will appear on the menu bar, and the image on the video screen will appear in black and white, not color.
Battery Replacement If you need to replace your NiMH rechargeable battery pack, please contact Fisher-Price® Consumer Relations at www.service.fisher-price.com or call 1-800-432-5437. Parent Unit • Locate the battery compartment door on the back of the parent unit. • Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. • Remove the exhausted battery pack and dispose of it properly.
Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • If replacing the battery pack, insert it as indicated inside the battery compartment. • Always remove an exhausted battery pack from the product. Dispose of the battery pack safely. Do not dispose of product in a fire. The battery pack inside may explode or leak. Contact Fisher-Price® Consumer Relations at service.fisher-price.
Problems & Solutions Problem No image on parent unit screen Solution Press the display button. You can also change the voice activated setting to . The video screen automatically turns on when baby makes noise. Batteries in parent unit are weak or dead. Use AC adaptor/ charger and to charge the battery and as a power source. Camera lens is obstructed. Adjust the camera angle. Parent unit beeps and out of range screen displays . Parent unit is out of range of camera. Move parent unit closer to camera.
Problems & Solutions Problem Solution Parent unit beeps and displays low battery icon on screen If the low battery icon with a 1 is displayed, the battery pack in parent unit is weak or dead. Use AC adaptor/charger to charge the battery and use as a power source. If low battery icon with a 2 is displayed, the battery pack in camera is weak or dead. Place the camera in the docking station to charge the battery and use as a power source. Camera power L.E.D. does not light Camera power is off.
Care • Excess dirt in camera microphone will hamper transmission of sound. Wipe all parts with a damp cloth. Do not immerse any part of this monitor. • Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities (Europe only). FCC Statement (United States Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
CONSUMER ASSISTANCE AYUDA AL CONSUMIDOR SERVICE À LA CLIENTÈLE 1-800-432-5437 (US & Canada) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers/Clientes con problemas auditivos/ Pour les malentendants : 1-800-382-7470. En México: 59-05-51-00 Ext. 5205 ó 01-800-463-59-89 Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. ©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S.