71970 Instructions Baby's Gym Toddler's First Piano r-p fishe www. ri c e .
WARNING To prevent entanglement injury, NEVER place gym or suspend links in crib or playpen. NEVER add strings, ties or other products to the gym. • Please keep this instruction sheet for future reference, as it contains important information • Adult assembly is required. • Requires three “C” batteries for operation (included). • Tool required for battery installation: Phillips screwdriver (not included).
Battery Replacement Battery Compartment Door Arch For best performance, we recommend replacing the batteries that came with this toy with three, new alkaline “AA” (LR6) batteries. • Locate the battery compartment on the arch. • Loosen the screws in the battery compartment door with a Phillips screwdriver and remove the door. • Insert three, new “C” (LR14) alkaline batteries. Hint: We recommend using alkaline batteries for longer battery life.
Battery Safety Information 1.5V x 3 “C” (LR14) SHOWN ACTUAL SIZE Batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of nonuse. Always remove exhausted batteries from the toy. Dispose of batteries safely.
Baby Gym 1 Threaded Knob Hole Joint Opening Leg Button One-time Assembly • Position one of the joints front side up. • Position a threaded knob with the peg side down. • Insert and snap the threaded knob into the upper hole in the joint. • Insert a right and left leg (marked R or L on each leg) into the slots on the joint. Make sure the buttons on the legs fit into the circular openings in the joints. • Repeat this procedure to attach the other threaded knob and two legs to the remaining joint.
Baby Gym 2 Threaded Knob Keys Arch Leg Assembly • Position the arch so that the keys are facing you. • Fit one end of the arch to the threaded knob on a leg assembly. • Turn the threaded knob clockwise to attach the leg assembly to the arch. Make sure the knob is fully tightened. • Repeat this procedure to attach the other leg assembly to the arch.
Baby Gym 3 Upper Groove Hanger Groove Lower Groove • Rotate the hanger on the back of the arch down. • Fit the T-end of one of the T-End hanging toys (star, sun or moon) into a groove in the front side of the hanger. Pull the hanging toy down to “snap” it into place.
Baby Gym 4 Power Switch Magic Star Volume Switch Volume Switch Star Ring Stars • Attach the stars to the bottom of the sun. • Attach the star ring to the bottom of the moon. • Slide the power switch to •• . Baby will enjoy approximately 10 minutes of music and dancing lights when one of the toys is tapped. • Adjust the volume to a comfortable listening level. Slide the switch to for low volume and for high volume. • Slide the power switch to •.
Toddler Piano 1 Threaded Knob Hole Joint Opening Leg Button One-time Assembly • Position one of the joints front side up. • Position a threaded knob with the peg side down. • Insert and snap the threaded knob into the upper hole in the joint. • Insert a right and left leg (marked R or L on each leg) into the slots on the joint. Make sure the buttons on the legs fit into the circular openings in the joints. • Repeat this procedure to attach the other threaded knob and two legs to the remaining joint.
Toddler Piano 3 Keys Threaded Knob Arch Leg Assembly • Position the arch so that the keys are upright. • Fit one end of the arch to the threaded knob on a leg assembly. • Turn the threaded knob clockwise to attach the leg assembly to the arch. Make sure the knob is fully tightened. • Repeat this procedure to attach the other leg assembly to the arch.
Toddler Piano 4 Leg Assembly Grooves T-End Moon • Fit the T-end of a hanging toy into either groove in either leg assembly. • Pull the hanging toy down to "snap" it into place. 5 Leg Assembly Star Star Star Ring • Attach the stars to the leg assembly as shown. • Attach the star ring to either leg assembly.
Toddler Piano 6 Keys Volume Switch Magic Star Power Switch Volume Switch • Slide the power switch to ••. Press any of the keys to hear a part of a song and see a twinkling light. After the music stops, press another key to hear the next part of the song and see more lights. • Adjust the volume to a comfortable listening level. Slide the switch to for low volume and for high volume. • Slide the power switch to •. Press any key to hear a musical note and see a twinkling light.
Care • Wipe all parts of this toy with a clean cloth dampened with a mild soap and water solution. Never immerse this toy. • Keep this toy away from direct sunlight and other sources of heat. • This toy has no consumer serviceable parts. Do not take this toy apart.
Consumer Information Questions? We'd like to hear from you! Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS (5437), 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to: Fisher-Price® Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052. For countries outside the United States: CANADA: Questions? 1-800-567-7724. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
FCC Note (United States Only) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. ©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
