K6670 Wagon Walker ™ Developmental classics enrich baby’s play www.fisher-price.
Parts Assembly 1 Handle Smooth Side Up • Position the shape sorter with the smooth outer edge facing up. • At an angle, fit a peg on one side of the shape sorter into the hole in the base. • While bending the shape sorter slightly, fit the other peg into the other hole in the base.
Assembly Hint: You can assemble the handle in either of two positions: Walker or Wagon. Walker 2 PRESS PRESS • “Snap” the hubs to the back of the base, as shown. 4 • Press the buttons on the side of the handle and “snap” the handle into the openings in the base. Wagon PRESS PRESS 3 • At an angle, insert a peg on the roller ball into the socket in the front of the handle. Then, push to “snap” the other peg on the roller ball into the other socket in the handle.
Consumer Information • Please keep this instruction sheet for future reference, as it contains important information. • Adult assembly is required. • No tools needed for assembly. • Wipe this toy with a clean cloth dampened with a mild soap and water solution. Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Decoration Proper label application will help to keep the labels looking their best! • For best results, do not attempt to apply a label more than once. • Make sure the areas where the labels will be applied are clean and dry. Wipe this product with a clean, soft, dry cloth to remove any dust or oils.
Easy Conversion Walker-to-Wagon Wagon-to-Walker PRESS PRESS PRESS PRESS • Press the buttons on the side of the handle and lift to remove from the hubs. • Press the buttons on the sides of the handle and lift to remove the base. PRESS PRESS PRESS PRESS • Press the buttons on the side of the handle and “snap” the handle into the hubs. • Press the buttons on the side of the handle and “snap” the handle into the base.