M6711 WARNING IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. www.fisher-price.co.
Care Consumer Information • GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303; www.service.mattel.com/uk. • Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312. • New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland. • Asia: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Assembly Parts IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad.
Assembly PULL UP PULL UP Base Tube Base Tube 3 5 • While standing on the base tube, pull the front legs up. The front legs should remain secured to the base tube. If you can remove the front legs, you have not assembled them correctly to the base tube. Re-read and repeat assembly step 2. • While standing on the base tube, pull the back legs up. The back legs should remain secured to the base tube. If you can remove the back legs, you have not assembled them correctly to the base tube.
Assembly Pad Lower Pocket Seat Hub Seat Hub 7 Seat Bottom Tube • Insert a screw through the outside of each seat hub. Tighten the screws. 9 • Fit the pad lower pocket onto the seat bottom tube, as shown. • Lift the seat bottom tube and buckle the straps on the pad together. Make sure you hear a "click". Pad Upper Pocket Toy Bar Seat Back Tube Waist Belts Waist Belt Slots Socket 10 8 • Insert and “snap” the peg on the toybar into the socket on the swing arm.
Battery Installation Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use. Always remove exhausted batteries from the product.
Securing Your Child WARNING Waist Belt To prevent serious injury and/or falls and being strangled in the restraint system: • Always use the restraint system. • Not recommended for children who can sit up by themselves (6 months approximately, until 9 kg/20 lbs). • Never leave child unattended. • It is dangerous to use this product on an elevated surface. Buckle Restraint Pad • Place your child in the seat. Position the restraint pad between your child’s legs.
Swinging and Music Storage Music Switch Power Switch • Place your child in the seat and secure properly. Hint: After turning on power, this product may not swing unless there is a child in the seat. • Slide the power switch to any of five speed settings. • Give the seat a light push to start the swinging motion. Adjust the power switch to the desired swing motion setting. Hint: As with most battery-powered swings, a heavier child will reduce the amount of swinging motion on all settings.
