H7455 Product features may vary from the picture above. For a Power Wheels® 12-volt system with two 6-volt lead acid batteries. This product is not intended for children; it is for adult use only. This charger is not a toy. Please read this booklet before first-time use. Keep these instructions for future reference, as they contain important information.
IMPORTANT INFORMATION DANGER To prevent electric shock, do not immerse in water; wipe clean with a damp cloth. WARNING Use of the wrong type battery or charger could cause a fire/explosion resulting in serious injury. CAUTION Use the charger in dry locations only.
IMPORTANT INFORMATION • IMPORTANT! Batteries can be severly damaged if they are not charged after each use. For maximum battery life, charge batteries 100% (solid green) every other charge. • If your batteries are new, charge batteries 100% (solid green). • Do not charge the batteries longer than 30 hours. • Adults Note: Regularly examine the charger for damage to the cord, plug, housing or other parts that may result in the risk of fire, electric shock or injury.
IMPORTANT INFORMATION WARNING • PREVENT FIRE - Use of the wrong type batteries or charger could cause a fire or explosion resulting in serious injury. - Use of Power Wheels® components in products other than Power Wheels® vehicles could cause overheating, fire or explosion. • The batteries must be handled by adults only. The batteries are heavy and contain sulfuric acid (electrolyte). Dropping the batteries could result in serious injury. • Never allow children to charge the batteries.
CHARGING INSTRUCTIONS Status Solid Red Flashing Green Solid Green Flashing Red * Charge Approximate Time Charging Ready for Use 100% (Full)* No Charge** -2 hours 6-8 hours -- For maximum battery life, charge batteries 100% (solid green) every other charge. ** Error - wrong or dead batteries.
CHARGING INSTRUCTIONS Charger Wall Outlet Power Cord Battery Connectors Power Cord 6 Volt Batteries Charger Connectors • Join the charger connectors and the 6-volt battery connectors. • Plug the power cord into the charger. • Plug the 6-volt battery connectors into the charger connectors. • Plug the power cord into a standard 120 volt wall outlet. Note: The charger may be hot to the touch while charging. New batteries may make a “sizzling” or “bubbling” noise and swell slightly.
PROBLEMS AND SOLUTIONS Problem No status light Flashing red status light Solid red status light 7 Possible Cause Solution No power to charger Make sure power flow to the wall outlet is “ON”. Loose connections Check connections of all plugs. Make sure the battery connectors are tightly plugged into the charger connectors and the power cord connector is tightly plugged into both the charger and the wall outlet.
PROBLEMS AND SOLUTIONS Problem Possible Cause Solution Batteries are warm while charging Normal while quick charging No action required. Charger is hot while charging Normal while quick charging No action required. Short vehicle run time or vehicle runs sluggishly Undercharged batteries Charge batteries 100% (solid green) or Ready for Use (flashing green).
FCC STATEMENT (United States Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CUSTOMER SERVICE If you have any questions about this product, please call our toll-free service lines at 1-800-348-0751 from 8 AM to 6 PM (EST) Monday through Friday. You can also visit us on-line at www. powerwheels.com. For your convenience, Power Wheels® maintains an independently owned and operated Authorized Service Center Network with more than 400 authorized service centers nationwide.
