Instruction Sheet

ManualsBrandsFisher-Price ManualsBaby MonitorsL6925

Please keep this instruction sheet for future reference,

as it contains important information.

Requires four “C” batteries for

aquarium (included) and two "AAA" (LR03)

alkaline batteries for remote (not included) operation.

Adult assembly is required.

Tool required for battery installation:

Phillips screwdriver (not included).

www.fisher-price.com

L6925

Summary of content (8 pages)

PAGE 1
L6925 Please keep this instruction sheet for future reference, as it contains important information. Requires four “C” batteries for aquarium (included) and two "AAA" (LR03) alkaline batteries for remote (not included) operation. Adult assembly is required. Tool required for battery installation: Phillips screwdriver (not included). www.fisher-price.
PAGE 2
Before Use CAUTION Please keep small parts such as the plastic tab out of children’s reach. Throw the plastic tab away. Note: A plastic tab was attached to the toy for in-store demonstration purposes. While the tab may have already been removed, check the back of the toy to be sure. If the plastic tab is still attached, pull and remove the tab. Throw the plastic tab away. Aquarium Battery Replacement 1.
PAGE 3
Remote Battery Installation 1.5V x 2 "AAA" (LR03) • Locate the battery compartment on the back of the remote. • Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. • Insert two "AAA" (LR03) alkaline batteries. Hint: We recommend using alkaline batteries for longer battery life. • Replace the battery compartment door and tighten the screw. • Protect the environment by not disposing of this product with household waste (2002/96/EC).
PAGE 4
Attach WARNING Prevent falls and entanglement: This product will not attach to all crib designs. Do not add additional strings or straps to attach to a crib or playpen. IMPORTANT! Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib or playpen according to the instructions. Do not add additional strings or straps to attach to crib. Check frequently.
PAGE 5
Attach 2 • Tie the toy’s strings to the crib spindles. Note: It is better to tie the strings in a knot than a bow, since a bow may be easily untied. Remove A B • Untie the aquarium strings. • Pull the attachment strap out and down to remove it from the button A. • Then, push the strap up and pull from the groove B.
PAGE 6
Use • When using the remote, make sure that the arrow on the aquarium dome is pointing towards the transmitter window on the remote. For best results, make sure the path between the transmitter window on the remote and the dome on the aquarium are in a direct line and free of obstacles. Rotate the aquarium dome so that the arrow points to the area from which you’re most likely to use the remote.
PAGE 7
Soothing Music and Soft Lights Power/ Volume Mode Select Top View Press Power/Volume Switch Choose from four settings: off on with high volume . Song Select ; on with low volume , on with medium volume or Song Select Button Press the button to change song selections. Mode Select Switch Slide the switch to select one of three modes: Music, sounds, lights and swimming motion Music, sounds and lights Music and sounds only • Press the button on the remote to activate the aquarium.
PAGE 8
Consumer Information Care • Wipe with a clean cloth dampened with a mild soap and water solution. Do not immerse. • This toy has no consumer serviceable parts. Do not take this toy apart. FCC Statement United States Only This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.