L5895 www.fisher-price.
Parts A. B. C. D. E.
Battery Installation • Locate the battery compartment on the bottom of the span. • Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. • Insert three “AAA” (LR03) alkaline batteries. We recommend the use of alkaline batteries for longer battery life. • Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten. • When lights become faint or stop, it’s time for an adult to change the batteries.
Assembly 1 “Snap” the arch onto the span. ARCH 2 SPAN CABLE STRUCTURE “Snap” a cable structure to the side of the span. 3 • “Snap” the top of the cable structure to the top of the arch. • Repeat this procedure to attach the other three cable structures to the span. Note: Each cable structure assembles to the span one way! 4 “Snap” the supports to the underside of the span.
Drive Through for a Rainbow of Lights! PRESS • Locate the power switch on the bottom of the bridge. Slide the switch to to turn the toy on. • Push the car over the bridge or drive a train engine (sold separately) over to see colorful lights. You can also press the button on the bridge to see the lights. • • Remove the supports to use the bridge at ground level. • When you are finished playing with this toy, slide the power switch off .
Visit www.fisher-price.com to see the entire world of GeoTrax® accessories! Please keep this instruction sheet for future reference, as it contains important information. Requires three “AAA” (LR03) alkaline batteries (not included). Adult assembly is required. Tool required for battery installation: Phillips screwdriver (not included). Wipe the toy with a clean, damp cloth. Do not immerse. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. PRINTED IN CHINA ©2007 Mattel, Inc.