J7823 WARNING PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. www.fisher-price.
WARNING Prevent serious injury or death from falls or sliding out: • Always secure child with the restraint belts until child is able to get in and out of the seat without help (about 2 1/2 years old). The tray is not designed to hold child in the seat. • Never leave child unattended. • Always secure the seat on a chair using the bottom and back attachment straps. Never use the seat on a stool or bench that does not have a seat back.
Parts Consumer Information IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. • Please read these instructions before assembly and use of this product. Keep this instruction sheet, as it contains important information. • Adult assembly and setup is required. No tools needed for assembly or setup.
Assembly Large Tab Seat Back Lowest Slots Tab Slot Waist Belts Seat Crotch Belt 3 1 • Fit the waist belts on the seat through the lowest slots in the pad. Make sure the waist belts are not twisted. • Fit the crotch belt on the seat through the large slot in the pad. Make sure the crotch belt is not twisted. • Fit the seat back tabs into the slots in the top of the seat. • Push the top of the seat back so that the large tab “snaps” into place in the seat.
Adjusting the Seat Height Assembly Base Latches Upper Slots Base 5 Lower Slots • Insert the shoulder belts through the slots in the pad. - Use the lower shoulder belt slots for a smaller baby. - Use the upper shoulder belt slots for a larger baby. • Make sure the shoulder belts are not twisted. Side View Adjusterr • While squeezing the latches together with one hand, lift or lower the base. Hint: This will require some force.You may want to pull one latch and lift or lower one side of the base.
Attaching to a Chair WARNING Prevent serious injury or death from falls or sliding out: Always secure the seat on a chair using bottom and back attachment straps. Never use the seat on a stool or bench that does not have a seat back. D D Back Straps 2 • Wrap the back straps around the back of the chair D . Buckle the straps . Make sure you hear a "click." Pull the free end of the strap to tighten on the chair .
Adjust Seat Recline WARNING Only use upright position when child is capable of sitting upright unassisted. Seat Recline Latch PULL Upright • While pulling the seat recline latch, push the top of the seat back to lower in the desired position. Or, while pulling the seat recline latch, push the bottom of the seat to lift in the desired position. • Release the seat recline latch. • Push on the seat back to be sure the seat is secure.
Adjust Armrests PRESS Upright Seating Armrest Button • While pressing the armrest button, rotate the armrest forward or backward to the desired position. • Repeat this procedure to adjust the other armrest.
Secure Child Adjuster WARNING C Prevent serious injury or death from falls or sliding out: • Always secure child with the restraint belts until child is able to get in and out of the seat without help (about 2 1/2 years old). The tray is not designed to hold child in seat. • Never leave child unattended. D Anchored End B TIGHTEN Free End Waist Belt To tighten the waist belts: • Feed the anchored end of the waist belt up through the buckle to form a loop . Pull the free end of the waist belt .
Tray Use Hint: Before first time use, wash the tray thoroughly with soap and water. WARNING Tray Button Prevent serious injury or death from falls or sliding out: Always secure child with the belts until child is able to get in and out of the booster seat without help (about 2 1/2 years old). The tray is not designed to hold child in the booster seat. 2 Tray Tray Latches • You can adjust the tray forward or backward.
Convert to Booster Seat This high chair easily converts to a booster high chair for toddlers. Shoulder Belts 2 • Fit the shoulder belts back through the slots in the pad. • Lift the top of the pad off of the seat back. Shoulder Belts 3 Hooks • Unfasten the pad hooks from the front edge of the seat. • Unbuckle the waist belts from the crotch belt. 1 • Push to remove the shoulder belts from the waist restraint buckle slots.
Convert to Booster Seat Seat Back Waist Belts Tab Seat Crotch Belt 5 Back View • Pull the tab on the seat back. Lift to remove the seat back from the seat. • Store the seat back, pad and shoulder belts in a safe place for future use. 4 • Fit the crotch belt down through the slot in the pad. • Fit the waist belts back through the slots in the pad. • Remove the pad from the seat. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. ©2005 Mattel, Inc.
