H8910 Instructions Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. No tools needed for assembly. www.fisher-price.
Assembly IMPORTANT! • Please make sure your child does not follow you using this toy while you are operating a real lawn mower. Your child should play in a separate area away from the area where you mow. • Use only bubble solution in this toy. • Make sure your child understands that bubble solution is not for drinking and that it should be kept away from the eyes. • While filling or cleaning this toy, try to avoid spilling bubble solution on the floor. It may create slippery floor conditions.
Bubblin’ Fun P R E S S 11 31 • Remove and discard the cap and seal from the bubble solution bottle. • Carefully fit the bottle to the bottom of the filler cap attached to the front of the mower. Twist the bottle to attach. • Press down on the bottle for about 15 seconds to fill the mower. 21 • Insert the bottle, cap side down, into the opening near the front of the mower. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. ©2005 Mattel, Inc. All Rights Reserved.
Bubblin’ Fun • If your mower still does not make bubbles: - Check to be sure there is enough bubble solution in the mower. - Make sure all four wheels contact the ground when pushing the mower. - Empty bubble solution from the mower. Wash the bubble chamber and filler opening. Refill with fresh bubble solution (see page 5). Note: We do not recommend the use of silicones or oily lubricants on this toy.
Let’s Clean Up 11 31 • Lift to remove the bubble solution bottle from the mower. Twist to remove the filler cap. Set the bottle • Tip the mower forward to empty all the water. RINSE HERE Cap End Up For Storage E NS RI ERE H 41 21 • Replace the filler cap on the bubble solution bottle and place the bottle in the filler opening cap end up. Hint: Please keep the bubble solution bottle with your toy and refill as necessary.
Problems and Solutions Problem Cause No bubbles Bubble solution is leaking from the mower Bubble solution is foaming Solution Not enough bubble solution in bubble chamber Press down on bubble solution bottle for 15 seconds to refill. Bubble chamber is clogged and dirty Follow instructions in “Let’s Clean Up” section to clean bubble chamber thoroughly.