H8589 Walk n Drive Learning Car Please keep this instruction sheet for future reference, as it contains important information. Maximum weight: 19 kg. (42 lbs). For ages between 9 months and 3 years. Requires three “AA” batteries (included). Adult assembly is required. Tool required for battery replacement: Phillips screwdriver (not included). www.fisher-price.
Parts Before Use CAUTION Please keep small parts such as plastic tabs out of children’s reach. Throw the plastic tab away. Note: A plastic tab is attached to the toy for in-store demonstration purposes. While the tab may have already been removed, check the dashboard to be sure. If the plastic tab is still attached, pull and remove the tab from the toy. Throw the plastic tab away.
Assembly Dashboard Front Wheels 1 3 Bottom View • Place the base upside down on a flat surface. • “Snap” the front wheels to the underside of the base, as shown. • Insert and “snap” the dashboard into the base, as shown. Hint: This may require some force. • Pull up on the dashboard to be sure it is secure to the base. Caster Wheels Hood 4 2 • Insert and “snap” the caster wheels into the base, as shown. Hint: This may require some force.
Battery Replacement 1 Battery Safety Information 2 1,5V x 3 “AA” (LR6) SHOWN ACTUAL SIZE 3 5 In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use.
Walker To change to Walker mode, follow these steps: 1 Latch 1 Bottom View 2 Slide • Turn the toy over. Press and slide the latch to an open position, as shown. 2 Bottom View • Spread the seat halves until they “click” in place. Turn the toy over. It is now ready to be used as a walker.
Ride-On To change to Ride-On mode, follow these steps: PRESS 1 • While pressing the button , close the seat halves. Turn the toy over. Latch 2 Bottom View • Slide the latch to a closed position. It should “click” into place.Turn the toy over. It is now ready to be used as a ride-on.
Two Fun Ways to Play! • Slide the mode switch to either learning mode ; music mode or off . • Adjust volume to high or low , for your child's comfort. • Low battery power may affect toy function, including irregular sound/lights and the toy may not turn off. Replace all batteries with alkaline batteries only. • When your child is finished playing with this toy, slide the mode switch to the off position.
Care Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not immerse this toy. This toy has no consumer serviceable parts. Do not take this toy apart. Do not drop this toy on a hard surface. Consumer Information GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303. www.service.mattel.com/uk Learn every day - through fun, familiar play! Make learning more fun with the whole collection of Laugh & Learn™ toys.