H5985 WARNING IMPORTANT! KEEP FOR FUTURE REFERENCE. www.fisher-price.co.
Consumer Information Parts WARNING CAUTION To prevent serious injury or death: • Fall Hazard - It is dangerous to use this reclined cradle on an elevated surface, since child's movement may cause the product to slide or tip over. Use only on a floor. • Suffocation Hazard - Never use on a soft surface (bed, sofa, cushion) since product can tip over and cause suffocation in soft surfaces. • Always use the restraint until child is able to climb in and out of the product unassisted.
Assembly IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. PRESS TABS Seat Back Tube 3 • Insert a screw through each side rail and into the ends of the cross brace. 1 Side Rail Sockets Button • Position each side rail so that the button faces outward.
Assembly Retainer with Lock Nut Side Rail Hole 7 Vibrations Unit 5 Front Tube • Fit a retainer with lock nut onto the end of the screw and to the inside of a side rail. Tighten the screw. Hint: A lock nut has been factory assembled to the retainer. During shipment, the lock nut may have fallen out of the retainer. If it has, please fit it into the hexagonal hole in the retainer so that the rounded side of the lock nut faces out.
Assembly Pad Pad Slot PRESS Seat Back Seat Back Tube Hardboard 10 Side Rail 9 Pad Buckles • Turn the hardboard over and insert it into the slot in the front edge of the pad. • Fasten the pad buckles on the front edge of the pad and underneath the seat. Make sure you hear a “snap” on both sides. • Press the fasteners together in the seat back portion of the pad. Pad Buckles • Fit the upper pocket on the pad onto the seat back tube. • Fasten the pad buckles around each side rail.
Battery Installation Setup and Use Hint: We recommend using alkaline batteries for longer battery life. WARNING + 1,5V “D” (LR20) - To prevent serious injury or death: • Fall Hazard - It is dangerous to use this reclined cradle on an elevated surface, since child's movement may cause the product to slide or tip over. Use only on a floor. • Suffocation Hazard - Never use on a soft surface (bed, sofa, cushion) since product can tip over and cause suffocation in soft surfaces.
Setup and Use Anchored End Anchored End Free End 5 TIGHTEN LOOSEN To tighten the belts: • Feed the anchored end of the restraint belt up through the buckle to form a loop . Pull the free end of the restraint belt . To loosen the belts: • Feed the free end of the restraint belt up through the buckle to form a loop . Enlarge the loop by pulling on the end of the loop toward the buckle. Pull the anchored end of the restraint belt to shorten the free end of the restraint belt .
Storage Care • The pad is machine washable. Wash the pad separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. • The frame, toy bar and toys may be wiped clean using a mild cleaning solution and a damp cloth. Do not use bleach. Do not use harsh or abrasive cleaners. Rinse clean with water to remove residue. Do not immerse the frame, toy bar and toys. To remove the pad: • Unfasten the buckles around each side rail.
