GJW90 Walk, Bounce & Ride Pony ASSEMBLY GUIDE 1
Before You Begin Keep these instructions for future reference as they contain important information. 1,5V AA (LR6) x3 Three AA batteries are required (included). Batteries included are for demonstration purposes only. Alkaline batteries make this toy work longer before you need to change them. Clean with a damp cloth. Do not immerse. Adult supervision required. Never use near steps. Choose areas for riding that are free of obstacles. Learn to stop safely.
Before You Begin Adult assembly is required (because we needed to fit this toy in the box). Plan on about 20 minutes for assembly. 20 You’ll need a Phillips screwdriver (not included) for assembly and battery replacement. Do not over-tighten assembled screws or the screw in the battery door. You may need to fill the seat with air using a manual air pump and standard needle. Need some assembly help? Use your smart device to scan the code. No app required! In camera mode, focus on the code.
Assembled Parts 2 Rear Wheels (larger and rounded on one side) 2 Front Wheels (smaller and flat on both sides) x9 M4,5 x 19 mm CAUTION This package contains small parts. For adult assembly only.
Assembly 1 x2 x2 2 x2 The front wheels are smaller and are flat on both sides. 5 The rear wheels are larger and have a flat and rounded side. When assembling, make sure the flat side is toward the pony body.
Assembly 3 4 x4 5 6
Assembly 6 7 x3 Replace Batteries Loosen the screw in the battery door and remove the door. Remove the exhausted batteries and properly dispose. Insert three, new AA (LR6) alkaline batteries. Make sure you insert the batteries correctly! Replace the battery door and tighten the screws. You may need to reset the electronics if this toy begins to operate erratically. Slide the power-volume switch off and back on. When sound or lights become faint or stop, it’s time for an adult to change the batteries.
Power, Volume, & Modes Spin for colorful lights, phrases and songs. Slide the switch to turn power ON with low volume , ON with high volume or OFF . Press the ABC or 123 buttons for learning songs, phrases and fun sounds! After a button press or roller spin, ride or push pony along for more music, phrases and sound effects. If motion doesn’t activate pony, be sure to press a button or spin the roller to wake pony up.
Bounce & Ride Fold the handle underneath pony and bounce or ride off into the sunset.
Walk Unfold the handle and let pony help with baby’s first steps.
Whoa there, partner! If you feel pony’s seat is too soft, it may need to be inflated. Locate the valve hole on the back of the seat and inflate the seat using a standard needle and manual air pump. Do not over-inflate the seat more than 1 PSI (pounds per square inch). Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product.
UNITED STATES Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Consumer Services: 1-800-432-5437. CANADA Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2 Consumer Services/Service à la clientèle : 1-800-432-5437. www.service.mattel.com. GREAT BRITAIN Mattel U.K. Limited, The Porter Building, 1 Brunel Way, Slough SL1 1FQ, UK. www.service.mattel.com/uk. NEDERLAND Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland. AUSTRALIA Mattel Australia Pty. Ltd.