EN IMPORTANT! Please keep these instructions for future reference. Please read these instructions before assembly and use of this product. • Adult assembly is required. • Allen wrench (included) required for assembly. • Product features and decorations may vary from illustrations. • Do not use power drills or drivers. • Phillips Head Screwdriver (Not included) required for assembly. Bulletin NO.
Part List A. Left Side Panel x 1 B. Right Side Panel x 1 E. Front & Back Top Rail x 2 C. Divider Frame x 1 F. Back Bottom rail x 1 H. Back Thick Panel x 2 I1. Back Panel x 1 K. Drawer Front x 6 L. Left Drawer x 6 O. Drawer Back x 6 P. Drawer Support x 6 I2. Back Panel x 1 M. Right Drawer x 6 D. Top Panel x 1 G. Front Bottom rail x 1 J. Middle Rail x 4 N.
Part List HARDWARE AND TOOL DIAGRAM Q1 2" Allen Head Bolt x 16 X1 1" Phillips Head Screw x 54 Q2 1-1/8" Allen Head Bolt x 6 X2 5/8" Phillips Head Screw x 32 R Plastic Crescent Washer x 8 X3 1-1/4" Knob Bolts x 6 T Wood Dowel x 20 Y Drawer Knob x 6 Z Allen Wrench x 1 V Anti-Tip Kit x 1bag (Instruction and Hardware inside) Plastic bag 2
Furniture Care Instructions Room Climate Control Wood, when first cut contains more than 50 percent water. When it is prepared for furniture construction it is placed in a Kiln and the moisture content is brought down to 8 to 10 percent. Wood is porous and responds to its environment. If the room has high humidity it will absorb it and expand and if the humidity is low it will lose moisture and shrink.
STOP IF YOU EXPERIENCE ANY ISSUES WITH THIS PRODUCT BEFORE YOU RETURN THIS TO THE RETAILER PLEASE FOLLOW PROCEDURES ON THE BACK PAGE 5
Assembly Step 1 E. Front & Back Top Rail x 2 F. Back Bottom Rail x 1 G. Front Bottom Rail x 1 T H.
Assembly Step 2 E. Front & Back Top Rail x 2 Q1 F. Back Bottom Rail x 1 G. Front Bottom Rail x 1 2" Allen Head Bolt x 2 Q2 1-1/8" Allen Head Bolt x 2 C.
Assembly Step 3 H. Back Thick Panel x 1 A. Left Side Panel x 1 R Plastic Crescent Washer x 4 J.
Assembly Step 4 B. Right Side Panel x 1 R J. Middle Rail x 2 H.
Assembly Step 5 Q1 2" Allen Head Bolt x 6 Q2 1-1/8" Allen Head Bolt x 4 D.
Assembly Step 6 Tracking label X2 5/8" Phillips Head Screw x 32 I1. Back Panel x 1 I2.
Assembly Step 7 K. Drawer Front x 6 P. Drawer Support x 6 N. Drawer Bottom x 6 O. Drawer Back x 6 L. Left Drawer x 6 M. Right Drawer x 6 X1 1" Phillips Head Screw x 54 X3 1-1/4" Knob Bolts x 6 Note: Grooves on Drawer Sides and Drawer Back should all face inward to allow Drawer Bottom to be inserted. Glides should be on the bottom outside of box.
Assembly Step 8 Plastic bag V Drawers Anti-Tip Kit x 1bag (Instruction and Hardware inside) Plastic bag Note: Please follow instructions in Anti -Tip Kit when assembly is complete.
Product Assistance Procedures You have purchased a quality piece of furniture. Our International team has spent many hours designing and engineering this piece and packaging to ensure you will be satisfied with your purchase. But if for any reason you need help with your purchase please contact us at any time. Procedures to follow should you have any questions: Most inquiries can be answered by visiting our website.
