User Manual

ManualsBrandsFisher-Price ManualsBouncersComfort Curve Bouncer

fisher-price.com

IMPORTANT! Read all instructions before use

of the infant bouncer seat. Keep instructions

for future use.

• Adult assembly is required. Tool needed for

assembly: Phillips screwdriver (not included).

• Requires one D (LR20) alkaline battery

(not included) for soothing unit operation.

• Use from birth until baby starts trying to sit

up or has reached 20 lb (9 kg), whichever

comes first.

• Product features and decorations may vary

from photographs.

¡IMPORTANTE! Leer todas las instrucciones

antes de usar la silla mecedora. Guardar estas

instrucciones para futura referencia.

• Requiere montaje por un adulto. Herramienta

necesaria para el montaje: desatornillador de

cruz (no incluido).

• La unidad relajante funciona con 1 pila

alcalina D (LR20) x 1,5V (no incluida).

• Usar a partir del nacimiento hasta que el

bebé intente sentarse por sí solo o pese 9 kg,

lo que ocurra primero.

• Las características y decoración del producto

pueden variar de las mostradas.

FMD19

Summary of content (12 pages)

PAGE 1
FMD19 IMPORTANT! Read all instructions before use of the infant bouncer seat. Keep instructions for future use. • Adult assembly is required. Tool needed for assembly: Phillips screwdriver (not included). • Requires one D (LR20) alkaline battery (not included) for soothing unit operation. • Use from birth until baby starts trying to sit up or has reached 20 lb (9 kg), whichever comes first. • Product features and decorations may vary from photographs.
PAGE 2
CO SU CONSUMER ASSISTANCE SS S ATENCIÓN AL CLIENTE 1-800-432-5437 (US) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers/Clientes con problemas auditivos 1-800-382-7470. Centro de Servicio en México: 59-05-51-00 Ext. 5206 ó 01-800-463-59-89 MÉXICO Importado y distribuido por Mattel de México, S.A. de C.V., Miguel de Cervantes Saavedra No. 193, Pisos 10 y 11, Col. Granada, Delegación Miguel Hidalgo, C.P. 11520, México, D.F. R.F.C. MME-920701-NB3.
PAGE 3
WARNING Fall Hazard: Babies have suffered skull fractures falling while in and from bouncers. • Use bouncer ONLY on floor. • ALWAYS use restraints. Adjust to fit snugly. • NEVER lift or carry baby in bouncer. • NEVER use toy bar as a handle. Suffocation Hazard: Babies have suffocated when bouncers tipped over on soft surfaces. • NEVER use on a bed, sofa, cushion, or other soft surface. • NEVER leave baby unattended. To prevent falls and suffocation: • ALWAYS use restraints. Adjust to fit snugly.
PAGE 4
Parts Piezas IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad. ¡IMPORTANTE! Sacar todas las piezas del empaque e identificarlas previo al montaje. Algunas piezas pueden venir embaladas en la almohadilla.
PAGE 5
Assembly Montaje IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. Do not use this infant bouncer if it is damaged or broken. Do not use accessories or replacement parts other than those approved by the manufacturer. Front Cross Brace Barra transversal delantera ¡IMPORTANTE! Antes del montaje y de cada uso, revisar que el producto no tenga piezas dañadas, conexiones sueltas, piezas faltantes o bordes filosos.
PAGE 6
Assembly Montaje 4 • Insert four screws into holes in the front cross brace and footrest. Tighten the screws. TOP VIEW VISTA DE ARRIBA • Insertar cuatro tornillos en los orificios de la barra transversal delantera y el reposapiés. Apretar los tornillos. Power Switch Interruptor de encendido Seat Back Tube Tubo del respaldo 3 Footrest Reposapiés Lower Hole Orificio inferior • Slide the footrest into the front cross brace, as shown.
PAGE 7
Assembly Montaje Retainer Retenedor 8 6 • Fit each retainer though each side opening in the pad. • Insert a screw in each hole in the seat back tube. Tighten each screw. • Pull the seat back tube up to be sure it is secure. • Ajustar cada retenedor en cada orificio lateral de la almohadilla. • Insertar un tornillo en cada orificio del tubo del respaldo. Apretar los tornillos. • Jalar hacia arriba el tubo del respaldo para asegurarse que está seguro.
PAGE 8
Assembly Montaje Toy Bar Barra de juguetes 10 TOP VIEW VISTA DE ARRIBA 11 • Fasten the buckle on the rear cross brace to the buckle on the back of the seat pad. Sockets Conexiones • Insert and “snap” the toy bar plugs into each retainer socket. The toy bar is designed to fit one way. If it does not seem to fit, turn it around and try again. Hint: The toy bar is removable. Press the ends of the latches and lift the toy bar.
PAGE 9
Setup and Use Preparación y uso WARNING Fall Hazard: Babies have suffered skull fractures falling while in and from bouncers. • Use bouncer ONLY on floor. • ALWAYS use restraints. Adjust to fit snugly. • NEVER lift or carry baby in bouncer. • NEVER use toy bar as a handle. Suffocation Hazard: Babies have suffocated when bouncers tipped over on soft surfaces. • NEVER use on a bed, sofa, cushion, or other soft surface. • NEVER leave baby unattended. To prevent falls and suffocation: • ALWAYS use restraints.
PAGE 10
Battery Installation – 1,5V D (LR20) + Colocación de la pila For longer life, use alkaline batteries. Para una mayor duración, usar solo pilas alcalinas. • Loosen the screw in the battery compartment door and remove the door. • Insert one D (LR20) alkaline battery into the battery compartment. • Replace the battery compartment door and tighten the screw. • If this product begins to operate erratically, you may need to reset the electronics. Slide the power switch off and then back on.
PAGE 11
Securing Your Infant Sistema de sujeción Restraint Pad Almohadilla de sujeción Anchored End Extremo fijo Free End Extremo libre 2 1 TIGHTEN APRETAR Anchored End Extremo fijo Free End Extremo libre LOOSEN AFLOJAR To tighten the restraint belts: • Feed the anchored end of the restraint belt up through the buckle to form a loop A . Pull the free end of the restraint belt B . To loosen the restraint belts: • Feed the free end of the restraint belt up through the buckle to form a loop A .
PAGE 12
Soothing Unit Unidad relajante Care Mantenimiento • The pad is machine washable. Wash it separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. • The frame, toy bar and toys may be wiped clean using a mild cleaning solution and damp cloth. Do not immerse the toy bar. Do not use bleach. Do not use harsh or abrasive cleaners. Rinse clean with water to remove residue. • To remove the pad: Lift to remove the pad pegs from the footrest.