User Manual

ManualsBrandsFisher-Price ManualsFigures & AccessoriesHyper Glow Station

Based on the Railway Series by The Reverend W Awdry.

Engine & Friends and Thomas & Friends are trademarks

of Gullane (Thomas) Limited.

are trademarks of HIT Entertainment Limited.

except as noted. PRINTED IN CHINA.

Mattel East Asia Ltd., Room 503-09, North Tower,

World Finance Centre, Harbour City, Tsimshatsui, HK, China.

Tel.: (852) 3185-6500.

FJL41-0970-1101850080-DOM

FJL41

FCC STATEMENT (UNITED STATES ONLY)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one

or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Consult the dealer or an experienced

radio/TV technician for help. NOTE: Changes or modiﬁcations not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the

equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-3 (B)/NMB-3 (B)

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) il doit pouvoir tolérer tout brouillage radioélectrique reçu,

même si ce brouillage est susceptible de compromettre son fonctionnement.

10 11

Press the button once to start the engine and watch its tail lights light up.

Press the button again to stop the engine and turn oﬀ the tail light eﬀect.

Engines can hang on the hooks.

Open the roof of

Tidmouth Sheds for engine storage.

1 3

4 5 6

7 8

Press the spout to see water

rise up and down.

RS3

What’s Included

Helpful Hints

Assembly

How To Play

Track Layout

Protect the environment by not

disposing of this product or any

batteries with household waste.

This symbol indicates that this

product shall not be treated as

household waste. Check your local

authority for recycling advice and

facilities.

Battery Information

Adult Assembly Required.

No Tools Needed.

Track marking codes are found on

the bottom of tracks and riser.

ONE-TIME SNAPS: Assembly steps that are marked with a star are “one-time

snaps.“ Once these parts are put together, they cannot be taken apart.

Note: Some engines may not work on this track set.

X1 X1 X1

1,5V x 2

“AAA” (LR03)

Required tool: Phillips

screwdriver (not included)

Note: If the engine runs continuously for approximately

3 minutes, it will automatically shut oﬀ to preserve

battery life. To resume play, press the button on the engine.

The engine’s body also glows in the dark. Expose the engine to light, then watch it glow in the dark.

Place product approximately 5 feet (152 cm) away from a light source for 30 seconds. Placing product

closer will not intensify the “glow-in-the-dark” feature. Glow-in-the-dark feature will last longer if you

do not expose this product to intense heat or direct sunlight for prolonged periods of time.

Once the tail lights are on, the engine is ready to charge

and activate glow-in-the-dark track. As the engine passes

over this track with its tail lights on, it will leave a glowing

trail on the tracks behind it.

To prevent entanglement,

keep hair away from wheels.

CAUTION:

Top View

Top View without

Tidmouth Sheds

Side View

RB1

RB2

RB2 RB2

RB2

RS3

RS4

RS3

TU2

TU4

TU2

TU4

BS1

RS4

Keep these instructions for future reference as they contain important information.

HYPER GLOW STATION

INSTRUCTIONS

BATTERY SAFETY INFORMATION

In exceptional circumstances batteries may leak ﬂuids that can cause

a chemical burn injury or ruin your product. To avoid battery leakage:

• Non-rechargeable batteries are not to be recharged.

• Rechargeable batteries are to be removed from the product before being charged.

• Rechargeable batteries are only to be charged under adult supervision.

• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.

• Do not mix old and new batteries.

• Only batteries of the same or equivalent type as recommended are to be used.

• Batteries are to be inserted with the correct polarity.

• Exhausted batteries are to be removed from the product.

• The supply terminals are not to be short-circuited. • Dispose of batteries safely.

• Do not dispose of this product in a ﬁre. The batteries inside may explode or leak.

BATTERY INSTALLATION

Access the battery compartment by unscrewing and separating the top half of the engine from the

bottom half of the engine. Install the batteries as indicated inside the battery compartment.

Re-assemble the two halves of the engine, re-insert the screw and tighten. If the product begins to

malfunction, check the battery installation. You may need to reset the electronics by removing the

batteries and reinstalling them. If the product continues to malfunction or no longer operates,

remove the batteries from the toy and

replace them with fresh batteries.

Requires 2 “AAA” (LR03) batteries.

For longer life use only

alkaline batteries.

To avoid derailment,

snap track together

evenly over riser.

BS1

TU4

BS1

RS4

RB1

2 3

Sheet Size Open: A3

Sheet Size Folder: A4

Item No : FJL41-0970

1101850080-DOM

Size : 16.54" x 11.69" (A3)

Paper : Woodfree paper 70 gsm

Color : 4C

Date : 3/2/2018 (Emma Wei)