User Manual

Use the switch-track to control your engine’s direction.
Stop-track can be used to stop and start TrackMaster™ motorized engines.
Move Cranky side-to-side and turn the dial to raise and lower
the hook.
Hook only lowers when carrying weight.
If the hook doesn’t lower, give it a tug.
Move your engines out of Tidmouth Sheds and
onto the turntable. Spin turntable to choose track.
S1
S1
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8
S8
S8
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
S1
S1
S1
ES5
ES7
S2
S2
S2
RB1
RB1
D3
D3
RS2
RS2
RS2
RS2
D3
RS2
DC
D3
Racetrack
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
CS
CS
CS
CS
CS
CS
CS
S2
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
RT
RT
S1
S1
S1
ES5
ES5
ES7
ES7
DC
S1
ES7
RB1
RB1
RB1
RB1
DC
D3
D3
D3
D3
D3
D3
D3
RS2
RS2
RS2
RS2
RS1
RS1
RS1
RS2
RS2
RS2
RS2
DC
D3
RS2
RB1
RS2
DC
S1
ES7
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S8
S8
S8
S1
S1
S1 S1 S1
S1 S1 S1 S1
S2
S2
S2
CS
CS
CS
CS
CS
CS
CS
CS
S1
S1
S1
S1
DC
DC
S4
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S8
S2 S1 S1
S2 S1 S1
S2
Buffer
S4
X1
S1
X12
S2
X3 X2
YS
CS
X12
X1
S8
D3
X10
X2
DC
ES7
X2
X2
ES5
RS1
X4
RS2
X14
X5
RB1
Pieces Used:
For sturdy assembly, please attach
tracks at the centers of risers as shown.
3 ft H x 7 ft L x 3 ft W
(0,91 m H x 2,1 m L x 0,91 m W)
(0,46 m H x 1,1 m L x 0,91 m W)
1.5 ft H x 3.5 ft L x 3 ft W
NOTE: To build the Micro layout, do not attach legs.
If going from another layout to the Micro layout,
please remove legs.
X2
RT
S1
X1
CS
X2
X3
S8
Pieces Left Over:
X2
Buffer
D3
D3
D3
D3
D3
RS1 RS1
RS1
RS1
RS2
RS2
RS2
RS2 RS2
RS2
RS2RS2
S1
X4
CS
X8
ES7
X2
Pieces Used:
X2
DC
S4
X1
S2
X3
X2
YS
CS
X6
X2
ES5
S1
X9
X4
S8
X2
RT
D3
X10
RS1
X4
RS2
X14
X5
RB1
Pieces Left Over:
X2
Buffer
RB1
RB1
RB1
S4
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7
ES7
S2
S2
S2
S4
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
CS
YS
YS
S1
S1
S1
S1
S1
S1
S1
S1
ES5
ES5
ES7
ES7
S1 S1
S1
S2
S2
S2
S4
X1
CS
X3
X1
RT
D3
X5
X1
DC
ES7
X1
X1
ES5
RS1
X4
RS2
X6
X3
RB1
Pieces Left Over:
X1
Buffer
Buffer
Buffer
Buffer
S1
X13
S2
X3 X2
YS
CS
X11
X4
S8
X1
RT
D3
X5
X1
DC
ES7
X1
X1
ES5
RS2
X8
X2
RB1
Pieces Used:
X1
Buffer
S4
X1
S1
X11
S2
X3 X2
YS
CS
X14
ES7
X2
X2
ES5
Pieces Used:
S1
X2
X4
S8
X2
RT
D3
X10
X2
DC
RS1
X4
RS2
X14
X5
RB1
Pieces Left Over:
X2
Buffer
3 ft H x 5.5 ft L x 5.5 ft W
(0,91 m H x 1,7 m L x 1,7 m W)
3 ft H x 3.5 ft L x 4.5 ft W
(0,91 m H x 1,1 m L x 1,4 m W)
S1
S1
D3
S1
S1
RS2
DC
S1
ES7
S4
S8
S1
X1
X1
X3
X1
X1
X1
X1
X1
X1
X1
X1
X1
X1
RT
X2
D3
DC
X10
X3
X1
X1
X1
X1
X1
X2
X2
X2
X13
X14
X2 X2
X2
X2
CS
YS
S2
ES5ES7
X14
RS2
X2
ATM
X2
A Adv
X2
AW1
X4
X4
X2
RS1
X5
RB1
HOW TO PLAYHOW TO PLAY
TRACK LAYOUTSTRACK LAYOUTS
TM
TM
ASSEMBLYASSEMBLY
2 4
6 7 8 9 10
1
Dual Racetrack
2 3 4 65
3
5
D3
D3
1
STOP
GO
Hook can be used to lift cargo.
To store Adventures
engines, please place onto
hook on an angle until you
hear a click sound.
Engines can be stored on hooks as shown.
Start with one side of the roof and snap along each edge so that
it “clicks” into place until you get to the other side.
Helipad can be
attached to either
side of roof.
For easier assembly, insert into one side first and then attach the
other side.
NOTE: If using the Micro layout, skip this step.
Correct orientation of support piece shown above.
Insert until you hear “click” sound.
Engines
and cargo
can be
carried in
engine lift.
HELPFUL HINTSHELPFUL HINTS
ADULT ASSEMBLY REQUIRED. No tools needed.
AAdv
AW1
• Track marking codes are found on the bottom of tracks and risers.
• ONE-TIME SNAPS: Assembly steps that are marked with a star are
“one-time snaps “. Once these parts are put together, they cannot
be taken apart.
Note: Some engines may not work on this track set.
ATM
(TrackMaster™)
(Wooden Railway)
(Adventures)
X2
X2
INCLUDES TRACK ADAPTERS TO CONNECT TO TRACKMASTER™, WOODEN RAILWAY,
AND ADVENTURES SETS.
CompactMicro
BATTERY INSTALLATION
Access the battery compartment by unscrewing
and separating the top half of the engine from
the bottom half of the engine. Install the
batteries as indicated inside the battery
compartment. Re-assemble the two halves of
the engine, re-insert the screw and tighten.
If the product begins to malfunction, check the
battery installation. You may need to reset the
electronics by removing the batteries and
reinstalling them. If the product continues to
malfunction or no longer operates, remove the
batteries from the toy and replace them with
fresh batteries. Requires 2 “AAA” (LR03) batteries.
For longer life use only alkaline batteries.
BATTERY INFORMATIONBATTERY INFORMATION TRACK LAYOUTSTRACK LAYOUTS
HOW TO PLAYHOW TO PLAY
Required tool:
Phillips screwdriver
(not included)
1,5V x 2
“AAA” (LR03)
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of batteries safely.
• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product or any batteries with
household waste. This symbol indicates that this product shall not be treated as
household waste. Check your local authority for recycling advice and facilities.
Based on the Railway Series by The Reverend W Awdry.
©2017 Gullane (Thomas) Limited. Thomas the Tank Engine & Friends
and Thomas & Friends are trademarks of Gullane (Thomas) Limited.
©2017 HIT Entertainment Limited. HIT and the HIT logo are
trademarks of HIT Entertainment Limited.
©2017 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks
of Mattel, except as noted. PRINTED IN CHINA. Mattel East Asia Ltd.,
Room 503-09, North Tower, World Finance Centre, Harbour City,
Tsimshatsui, HK, China. Tel.: [phone].
To prevent entanglement,
keep hair away from wheels.
CAUTION:
CHOKING HAZARD – Small parts.
Not for children under 3 years.
WARNING:
FGR22-0970-G2
1101435661-DOM
FGR22
WHAT’S INCLUDEDWHAT’S INCLUDED LABEL PLACEMENTLABEL PLACEMENT
INSTRUCTIONS
Keep these instructions for future reference
as they contain important information.
Includes Thomas, Percy, James and Harold.
Other engines sold separately and subject
to availability. Does not work with My First
Thomas engines.
TM
works with
works with
TM
Item No : FGR22-0910-G2
1101435661-DOM
Size : 33.1” x 23.4”
Paper : Woodfree paper 70 gsm
Color : 4C
Date : 08/2/2017 (Emma Wei)
Dieline
Magenta
Front Back
Fold
3
4
5 6 7 8
9 10 11 12
COVER B ACK
16
17 18
13 14 15
19 20
21 22 23 24
25 26 27 28
29 30 31 32
COVER
BACK
3 4
9
10
11 12
5
6
7
8
13
14
15
16
Cover Back
Cover
4/28/17 remark for G1
- Updated battery informatiom
8/2/17 remark for G2
- Updated copy