User Manual

ManualsBrandsFisher-Price ManualsBouncersFun 'n Fold Bouncer

DXY19

fisher-price.com

IMPORTANT! Read all instructions before use

of the infant bouncer seat. Keep instructions

for future use.

• Adult assembly is required. Tool needed for

assembly: Phillips Screwdriver (not included).

• Requires one D (LR20) alkaline battery

(not included) for soothing unit operation.

• Use from birth until baby starts trying to

sit up.

• Product features and decorations may

vary from images.

¡IMPORTANTE! Leer todas las instrucciones

antes de usar la silla mecedora. Guardar estas

instrucciones para futura referencia.

• Requiere montaje por un adulto. Herramienta

necesaria para el montaje: desatornillador de

cruz (no incluido).

• La unidad relajante funciona con 1 pila

alcalina D (LR20) x 1,5V (no incluida).

• Usar a partir del nacimiento hasta que el bebé

intente incorporarse por sí solo.

• Las características y decoración del producto

pueden variar de las mostradas.

Slide the power switch to turn

on soother power. Vibrations

will not start until you place

baby in product.

Place baby in seat and

soothing vibrations start!

When you remove baby from

the seat, vibrations turn off to

conserve battery life.

Poner el interruptor de

encendido en ENCENDIDO

para prender la unidad

relajante. Las vibraciones no

empezarán hasta que el bebé

esté en el producto.

¡Sienta a tu bebé en la silla

para que empiecen las

vibraciones! Al sacar a tu bebé

de la silla, las vibraciones se

apagan para ahorrar pilas.

Summary of content (12 pages)

PAGE 1
DXY19 Slide the power switch to turn on soother power. Vibrations will not start until you place baby in product. Place baby in seat and soothing vibrations start! When you remove baby from the seat, vibrations turn off to conserve battery life. Poner el interruptor de encendido en ENCENDIDO para prender la unidad relajante. Las vibraciones no empezarán hasta que el bebé esté en el producto.
PAGE 2
Consumer Information Información al consumidor WARNING Fall Hazard: Babies have suffered skull fractures falling while in and from bouncers. • Use bouncer ONLY on floor. • ALWAYS use restraints. Adjust to fit snugly. • NEVER lift or carry baby in bouncer. • NEVER use toy bar as a handle. Suffocation Hazard: Babies have suffocated when bouncers tipped over on soft surfaces. • NEVER use on a bed, sofa, cushion, or other soft surface. • NEVER leave baby unattended.
PAGE 3
Parts Piezas IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad. ¡IMPORTANTE! Sacar todas las piezas del empaque e identificarlas previo al montaje. Algunas piezas pueden venir embaladas en la almohadilla. Toy Bar Barra de juguetes Frame Base Base del armazón Frame Hint: We recommend installing the battery in the battery compartment located on the frame before beginning assembly.
PAGE 4
Assembly Montaje IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. Do not use this infant bouncer if it is damaged or broken. Do not use accessories or replacement parts other than those approved by the manufacturer. Back Base Base trasera ¡IMPORTANTE! Antes del montaje y de cada uso, revisar que el producto no tenga piezas dañadas, conexiones sueltas, piezas faltantes o bordes filosos.
PAGE 5
Assembly Montaje Frame Wires Cables del armazón Seat Back Tube Tubo del respaldo Sockets Conexiones 4 • Lift the frame wires. • Levantar los cables del armazón. Frame Base Base del armazón 6 • Position the seat back tube so that the socket in the toy bar retainers are upright. • Fit the seat back tube onto the base. Hint: The seat back tube is designed to fit one way. If it does not seem to fit, turn it around and try again.
PAGE 6
Assembly Montaje Pad Almohadilla Toy Bar Retainers Abrazaderas de la barra de juguetes 8 7 • Position the pad above the frame. • Fit the upper pocket on the back of the pad onto the seat back tube. • Fit the toy bar retainers through the openings on each side of the pad. • Insert a screw in each hole in the seat back tube. Tighten each screw. • Pull the seat back tube up to be sure it is secure. • Insertar un tornillo en cada orificio del tubo del respaldo. Apretar los tornillos.
PAGE 7
Assembly Montaje Toy Bar Barra de juguetes Pad Side Straps Cinturones laterales del colchón 9 BACK VIEW VISTA DE ATRÁS • Fasten the straps on each side of the pad. Make sure you hear a "click". • Abrochar los cinturones en cada lado del colchón. Asegurarse de oír un clic. 10 FRONT VIEW VISTA DEL FRENTE • Insert and “snap” the toy bar plugs into the toy bar retainers. The toy bar is designed to fit one way. If it does not seem to fit, turn it around and try again. Hint: The toy bar is removable.
PAGE 8
Setup and Use Preparación y uso WARNING Fall Hazard: Babies have suffered skull fractures falling while in and from bouncers. • Use bouncer ONLY on floor. • ALWAYS use restraints. Adjust to fit snugly. • NEVER lift or carry baby in bouncer. • NEVER use toy bar as a handle. Suffocation Hazard: Babies have suffocated when bouncers tipped over on soft surfaces. • NEVER use on a bed, sofa, cushion, or other soft surface. • NEVER leave baby unattended. To prevent falls and suffocation: • ALWAYS use restraints.
PAGE 9
Battery Installation – 1,5V D (LR20) Colocación de la pila Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbonzinc) or rechargeable (nickel-cadmium). • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use.
PAGE 10
Securing Your Child Sistema de sujeción Restraint Pad Almohadilla de sujeción Anchored End Extremo fijo Anchored End Extremo fijo A B B A Free End Extremo libre 2 1 TIGHTEN APRETAR Free End Extremo libre LOOSEN AFLOJAR To tighten the restraint belts: • Feed the anchored end of the restraint belt up through the buckle to form a loop A . Pull the free end of the restraint belt B . To loosen the restraint belts: • Feed the free end of the restraint belt up through the buckle to form a loop A .
PAGE 11
Fold Flat Storage Se dobla para guardarla SLIDE AND LIFT DESLIZAR Y LEVANTAR SIDE VIEW VISTA DEL LADO 1 • Grasp the handle on the base frame slide and lift to remove the base frame from the back base. • Agarrar el asa de la base del armazón y deslizar y levantar la base del armazón para quitarla de la base trasera. 3 • To set the seat back up, lift the seat back. • Slide the frame base back to "snap" it to the back base. Hint: You may need to lift the frame base while sliding it to "snap" into place.
PAGE 12
Care CO SU CONSUMER ASSISTANCE SS S ATENCIÓN AL CLIENTE Mantenimiento • The pad is machine washable. Wash it separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. • The frame, toy bar and toys may be wiped clean using a mild cleaning solution and damp cloth. Do not immerse the toy bar. Do not use bleach. Do not use harsh or abrasive cleaners. Rinse clean with water to remove residue. To remove the pad: • Unfasten the pad side straps.