DTM21 B8507 Keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tool needed for assembly: Phillips screwdriver (not included). Hand pump (not included) and inflation pin (not included) required to inflate the soccer ball. Requires three AAA (LR03) alkaline batteries (not included) for operation. Please remove all parts from the package and identify them before assembly. fisher-price.
Parts Tube with Tapered End and Regular End (Upper) Target Net 2 Tubes with Tapered Ends (Upper and Lower) 2 Side Tubes Tube with Tapered End and Regular End (Lower) Ball CAUTION M5 x 28 mm Screw - 6 This package contains small parts. For adult assembly only. M5 Lock Nut - 6 BOTH SHOWN ACTUAL SIZE Note: Tighten and loosen all screws with a Phillips Screwdriver. Do not over-tighten the screws.
Assembly Tube with Tapered Ends Side Tube Long End Tube with Tapered End and Regular End Rounded Side 1 Rounded Side 3 • Place a tube with tapered end and regular end on a flat surface. • Fit a tube with tapered ends into the regular end, as shown. Hint: The tube assembly should form this shape . • Align the holes in the tubes. • Fit a lock nut, rounded side out, into the hex hole on the inside of the tube with tapered end and regular end.
Assembly Side Tube Short Sleeve 5 • Locate the short sleeves on the sides of the net. • Fit a short sleeve onto a side tube. Note: Do not fit the bottom sleeves onto the tube in this assembly step. 7 • Slide the sleeves and the net evenly around the frame, as shown. Bottom Sleeve Short End of Tube 6 • Next, fit the side sleeve, top sleeve, side sleeve and other short sleeve onto the side tube. Note: Do not fit the bottom sleeves onto the tube in this assembly step.
Assembly Short End of Tube Short End of Tube 9 • Fit the short end of the tube into the frame assembly. 12 • Fit the short end of the tube into the frame assembly. Rounded Side 10 • Fit a lock nut, rounded side out, into the hex hole on the inside of the tube assembly. Hint You may need to slide the net down to access the hole. • Insert a screw into the outside hole in the side tube assembly. • While holding the lock nut in place with your thumb, tighten the screw.
Assembly Battery Installation 1,5V x 3 AAA (LR03) For longer life, use alkaline batteries. 14 Rounded Side • Fit the ends of the tubes together. • Fit a lock nut, rounded side out, into the hex hole on the inside of the tube assembly. • Insert a screw through the hole in the outside of the tube assembly. • While holding the lock nut in place with your thumb, tighten the screw. • Loosen the screws in the battery compartment door and remove the battery compartment door.
Beginner Pro Beginners score fun sounds when the ball hits the net! Hit the target like a pro for fun sounds! Power/Mode Switch Tab Power/Mode Switch Pocket Move Target Up or Down Net Target Tab Target Strap Top Edge of the Frame Back View of Target Target Top Edge of the Frame • Locate the power/mode switch on the back of the target. Slide the switch to 1 for beginners. • Fit the target onto the top edge of the frame. • Fit the tab on the back of the target onto a net loop.
Consumer Information CONSUMER ASSISTANCE 1-800-432-5437 (US & Canada) 1300 135 312 (Australia) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470. Outside the United States: Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com. Great Britain: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303. www.service.mattel.com/uk Mattel Europa B.V.