DTM19 T5508 Keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included). Requires three C (LR14) alkaline batteries (not included) for operation. fisher-price.
Consumer Information US Instructions CONSUMER ASSISTANCE 1-800-432-5437 (US & Canada) 1300 135 312 (Australia) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470. Outside the United States: Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com. Great Britain: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303. www.service.mattel.com/uk Mattel Europa B.V.
Assembled Parts Lower Arm Main Assembly Upper Arm Leg with Button Tether Leg Home Plate Base M3,5 x 1,6 cm Screw - 14 SHOWN ACTUAL SIZE Note: Tighten and loosen all screws with a Phillips Screwdriver. Do not over-tighten the screws.
Assembly Plug Upper Post Socket Leg with Button 3 Lever Lower Post • Fit the plug coming from the underside of the base into the socket in the leg with the button. 1 • Align the rib on the upper post to the groove in the lower post (on the main assembly. Slide the upper post into the lower post. Hint: This will require some force. • Push the lever into one of the slots on the side of the upper post. 4 IMPORTANT! Follow this step carefully. Base BOTTOM VIEW • Turn the assembly on its side.
Assembly Place Home Plate Here for a Right-Handed Hitter Place Home Plate Here for a Left-Handed Hitter 6 9 • Turn the assembly upright. • Place home plate over the the button on the leg assembly for either a left or right-handed batter. • "Snap" the arm assembly to the top of the main assembly. Tether 7 BOTTOM VIEW • Turn the assembly on its side. • Insert four screws into the leg assembly and tighten. 10 • "Snap" the tether up into the arm.
Battery Installation Battery Safety Information 1,5V x 3 C (LR14) In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbonzinc) or rechargeable (nickel-cadmium). • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use. Always remove exhausted batteries from the product.
Step-up to the Plate! IMPORTANT! Only use balls supplied with this toy. 1 • Load the balls into the cage. 4 • Tap home plate with the end of your bat to load a ball. Hint: For best results, make sure the balls are clean and dry. 2 • Turn the power switch to ON. 5 3 • Swing and hit the ball. • Tap home plate again to load another ball. • When you're finished playing with the toy, turn the power switch to OFF. Lever • Lift the lever and raise or lower the post to the appropriate height for your child.
Consumer Information FCC STATEMENT (UNITED STATES ONLY) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
