User Manual

APPLY LABELS
CONTENTS
DKR43-0970G2
1100692611-DOM
4+
®
INSTRUCTIONS:
ELITE RESCUE™ RECON RAIDER™
1
ASSEMBLY
3
TO PLAY
4
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product.
To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may explode or leak.
5
Label sheet
14
SERVICE.MATTEL.COM
2 3
©2015 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer
Services 1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303.
Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia
Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Tel.: (852)
3185-6500. Diimport & Diedarkan Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7, Bangsar
South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur, Malaysia. Tel: [phone], Fax: [phone].
1.
1. ROLL AROUND IN VEHICLE MODE. 2. TRANSFORM TO COMMAND
TOWER MODE.
2.
4. LAUNCH VEHICLE FROM THE SIDE!3. LAUNCH VEHICLE FROM UPPER DECK!
4. 3.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE AS THEY CONTAIN IMPORTANT INFORMATION.
MORE WAYS TO PLAY
WORKS WITH STRIKE HAWK
™
SOLD SEPARATELY, SUBJECT TO AVAILABILITY.
NOT FOR USE WITH SOME MATCHBOX
®
VEHICLES.
BATTERY REPLACEMENT
2
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could
void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
WORKS WITH
JACKED JUMPER™
WORKS WITH
PULVER-ICER™
Protect the environment by not disposing of this product with household waste (2002/96/EC).
Check your local authority for recycling advice and facilities.
L
R
a
b
Includes 3 AG13 (LR44) button cell
batteries for demonstration purposes.
Dispose of batteries safely.
• Replace the batteries if sounds distort or lights dim.
• Unscrew the battery cover with a Phillips head screwdriver
(not included).
• Remove batteries included for demonstration purposes and
dispose of them safely.
• Install 3 new AG13 (LR44) button cell batteries in the
orientation (+/-) shown.
• Replace battery cover and tighten screw.
• For longer life, use alkaline batteries.
• When exposed to an electrostatic source, the product may
malfunction. To resume normal operation, remove and
re-install the batteries.
ADDITIONAL VEHICLES SOLD SEPARATELY.
a
b
STAND CLEAR
1
5
4
3
6
7
2
8
FORWARD
FORWARD
STAND CLEAR
L
L
R
R
FORWARD
STAND CLEAR
FORWARD
DKR43-0960
1100961049
1
1
2 4
6
7
8
3
5
8
©2015 Mattel
CHOKING HAZARD – Small parts.
Not for children under 3 years.
WARNING: