User Manual

IMPORTANT:
• Readjust dial if needed when moving your search to a new location.
• The truck may not find metal objects correctly in certain
environments where there is a high concentration of metal in the
sand/soil, such as in desert sand and some topsoils.
• If all steps are followed and truck is continuously flashing red
and detection sounds are heard, move to a different search area.
For push around play, fold up antenna loop and press button on
truck cab for lights and sounds.
• No metal detection in this mode.
• Larger metal objects can be found at deeper depths.
• Do not leave the truck outdoors in sun or rain.
• Do not carry the truck by the antenna loop as this will cause damage.
• Do not use the antenna loop as a shovel.
• Do not bury the truck in sand.
• Avoid playing on wet surfaces or in water.
• Shake sand off and use a soft cloth to wipe the truck clean.
• Scooper can be rinsed and immersed in water.
• Do not rinse or immerse the truck in water.
• Do not use chemicals to clean the truck.
Pinpointing takes practice and is
helpful to locate the buried treasure.
1. When detection occurs, continue
sweeping the antenna loop over
the target area with a continuous
side to side motion to gradually
narrow down the search area.
2. Detected metal objects can be
located under the truck’s antenna
loop or very close to it.
LOW SENSITIVITY HIGH SENSITIVITY
43
75
1 2
6 8
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids that can
cause a chemical burn injury or ruin your product. To avoid
battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product
before being charged.
• Rechargeable batteries are only to be charged under
adult supervision.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended
are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may
explode or leak.
Includes 4 AA (R6) carbon-zinc
batteries for demonstration purposes
only. Replace the batteries if truck
begins to malfunction. Unscrew the
battery cover with a Phillips head
screwdriver (not included). Remove
batteries and dispose of them safely.
Install 4 new AA (LR6) Alkaline batteries
in the orientation (+/-) shown. Replace
battery cover and tighten screw. For
longer life, use alkaline batteries. When
exposed to an electrostatic source, the
product may malfunction. To resume
normal operation, remove and re-install
the batteries.
©2015 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue,
East Aurora, NY 14052, U.S.A. Consumer Services 1-800-524-8697.
Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline
01628 500303. Mattel Australia Pty., Ltd., Richmond, Victoria.
3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia
Ltd., Room 503-09, North Tower, World Finance Centre, Harbour City,
Tsimshatsui, HK, China. Tel.: [phone]. Diimport & Diedarkan
Oleh: Mattel Southeast Asia Pte. Ltd. , No 19-1, Tower 3 Avenue 7,
Bangsar South City, No 8, Jalan Kerinchi, 59200 Kuala Lumpur,
Malaysia. Tel: [phone], Fax: [phone].
PLEASE KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE AS THEY CONTAIN
IMPORTANT INFORMATION.
CONTENTS / FEATURES
INSTRUCTIONS
BUTTON
Use it to activate
lights/sounds,
metal detector
& adjust volume.
SCOOPER
Use it to dig and sift for
treasure/metallic objects.
SENSITIVITY
CONTROL DIAL
Use it to adjust how
sensitive the
antenna loop is to
metallic objects.
ANTENNA LOOP
Use it to search for
treasure/metallic objects.
Place truck on non-metal play surface, flip down antenna loop
and adjust dial for sensitivity*.
*If detector is continuously blinking red with detection
sounds, adjust sensitivity knob until red light stops
blinking. See Step 7 for further details on adjusting
metal detector for optimal play.
Remove scooper and dig in detected area!
1. Push the truck around and sweep the search area
continuously. Truck’s green light will flash and seeking sounds
will be heard.
• Note: Truck must have continuous movement in order to
detect objects.
• Truck will enter sleep mode after approximately 60 seconds.
Press button on truck cab to reactivate.
2. Red light will flash and detection sounds will be heard when
metal is detected*.
*See Step 8 for further details on accurate pinpointing in
suspected detection areas.
Grab a map & hunt for adventure with the
Matchbox
®
Treasure Truck
™
! The hunt is on!
A.
B.
A.
B.
SERVICE.MATTEL.COM
A.
B.
C.
DISCOVER
4
TRUCK MODE
5
VOLUME CONTROL
6
PINPOINTING
8
HELPFUL HINTS
9
CLEAN UP
10
BATTERY REPLACEMENT
11
ADJUSTMENT
7
DIG
3
DETECT
2
TURN ON & ADJUST
1
Dig & sift until treasure is found!
Snap scooper back onto truck.
This is a battery-operated product.
1 FCC flyer (00007-1849G7) is required
to be placed inside the packaging.
Protect the environment by not disposing of this
product with household waste (2002/96/EC). Check
your local authority for recycling advice and facilities.
®
For optimal play, place the truck on the play surface, away from
metal objects. Turn the sensitivity control dial clockwise until red
light flashes and detection sounds are heard. Then slowly turn the
dial counter-clockwise until red light stops flashing. Stop when the
green light flashes and seeking sounds are heard.
Press and hold button to toggle through volume levels.
Release button when desired volume is heard.
DJH50-0970
1100766595-DOM
3+
™