Deluxe Healthy Care High Chair ™ Product features and decoration may vary from the photo above. Model Number: B2105, B0326 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included). ib Discover what ’s poss le … ™ ishe f . w ww r- e.
Warnings and Caution Consumer Information Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us toll-free, rather than return this product to the store. Usually, we can solve the problem over the telephone or send you replacement parts. Please call Fisher-Price® Consumer Relations, toll-free at 1-800-432-5437, 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470.
Parts Headrest 3 Food Trays Pad Seat Back Base Tray Seat Bottom Frame Hinge Rod #10 x 7/8" Black Screw Storage Caddy #8 x 3/4" Screws 2 Seat Bottom Tubes 3/4" #8 x Screws 4 Screw Retainers #10 x 7/8" Black Screw - 4 Back Base Footrest #8 x 3/4" Screws Frame 4 Wheels #8 x 3/4" Screw - 8 SHOWN ACTUAL SIZE #10 x 7/8" Black Screws Front Base #10 x 7/8" Black Screw - 7 SHOWN ACTUAL SIZE 3
Assembly IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. Seat Bottom Tubes Footrest Plastic Rings Seat Bottom Plastic Rings 3 • Align the holes in the plastic rings and the seat bottom tubes.
Assembly Frame Leg Seat Back Pin Seat Back Pin Opening Opening 7 Seat Bottom Assembly • Pull the frame leg out on each frame to open. Make sure it “clicks” into place. 5 • Turn the seat bottom assembly upright. • Fit the seat back pins into the openings in the top side of the seat bottom assembly. Short Leg Tube #10 x 7/8" Black Screw SHOWN ACTUAL SIZE Back Base Hinge Long Tapered Leg Tube Hinge Rod 8 6 • Turn the seat assembly face down.
Assembly Frame Decorated Side Seat Height Adjusters Position 4 Frame Back Legs Press Lever 10 Back Base Hole • While pressing the levers on the seat height adjusters, lift them to position 4 on the frame front legs, as shown. Screw Retainers 9 Back Base Hole Seat Assembly #10 x 7/8" Black Screw - 2 SHOWN ACTUAL SIZE Screw Retainer - 2 • • • • Position a frame so that the decorated side is outward. Insert the back leg of a frame into the back base.
Assembly Push Seat Height Adjuster Push Seat Height Adjuster Front Leg Hole 13 Seat Bottom Tube Ends Screw Retainers #8 x 3/4" Screw - 2 • Push each seat height adjuster SHOWN ACTUAL SIZE to be sure they are completely on the seat bottom tubes. • Insert a #8 x 3/4" screw through each seat height adjuster and the ends of the seat bottom tube. • Tighten the screws with a Phillips screwdriver. Do not over-tighten.
Assembly Pad Front Base Holes Elastic Loops Wheels Wheels Hole Hole Back Base Holes 15 Bottom View • Tip the assembly so that the back of seat is flat on the floor and the front and back bases are facing up. • Insert and “snap” the peg on a wheel into each of the four holes in the front and back bases. Wheel Peg 16 Hole Tabs Hint: To remove the wheels from the front and back base, simply pull and remove. Store the wheels in a safe place for future use.
Assembly Slot Crotch Belt 19 17 Pad Bottom Slots • Lift the top of the pad. • Thread the waist/shoulder belts through the bottom slots in the back of the seat pad. • Insert the crotch belt through the slot in the pad. Make sure the crotch belt is not twisted. Upper Shoulder Belt Slots Lower Shoulder Belt Slots Shoulder Portion Shoulder Portion Headrest Pad Slots 20 18 • Fold the top of the pad down.
Assembly Headrest Pad Strap Handle Elastic Loop Elastic Loop Tab Belt Ends Tab 21 23 Back View • Fit the strap on the top of the headrest through the handle. Handle Pad Strap • From behind the seat, be sure the shoulder portion of the waist/shoulder belts are secure in the seat back slots. • Hook the elastic loops on each side of the pad onto the tabs in the seat back.
Securing Your Child IMPORTANT! Before each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. Anchored End Anchored End A B WARNING Free End Free End Buckle 2 Prevent serious injury or death from falls or sliding out.
Securing Your Child Using the Trays WARNING Prevent serious injury or death from falls or sliding out. The child should be secured in the high chair at all times by the restraining system, either in the recline, semi-recline or upright position. The restraint belts must be adjusted to fit your child snugly. The tray is not designed to hold the child in the chair.
Using the Trays Hint: The base tray can be removed two ways (see steps 9 and 10)! Hint: The base tray can be adjusted for your child’s comfort two ways (see steps 7 and 8)! Base Tray Base Tray Squeeze Latch Squeeze Latch Release Bar 9 7 • Squeeze one or both of the latches underneath the base tray and lift. • While pushing the release bar on the front of the base tray, adjust the base tray forward or backward.
Using the Trays Using the Brakes WARNING Food Tray Prevent serious injury or death from falls or sliding out. • Always leave wheels locked. • Never use near stairs. Base Tray 11 • Fit the food tray into the base tray, as shown. Hint: Before use, thorougly wash all parts (the trays) that may contact food. Wheels 12 Tab Tab Lift Tab Press Tab Lock Unlock TO LOCK: Press the tab on all four wheels down until you hear a “snap”. TO UNLOCK: Lift the tab on all four wheels up.
Adjusting the Seat Hint: Adjust the seat angle to any of three positions: Upright, Semi-Recline or Recline. WARNING Prevent serious injury or death from falls or sliding out. It is recommended that the high chair be used in the upright position only by children capable of sitting upright unassisted.
Storage Care • The pad and headrest are machine washable. Wash the pad and headrest separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. • The frame and base tray may be wiped clean using a mild cleaning solution and a damp cloth. Do not immerse the base tray. • The food trays are dishwasher safe. Simply remove the food tray from the base tray and place in your dishwasher.