User Manual

ManualsBrandsFisher-Price ManualsBouncersComfort Curve Bouncer - Floral Confetti

CFB88

fisher-price.com

IMPORTANT! Keep this instruction sheet

for future reference, as it contains

important information.

• Please read these instructions before

assembly and use of this product.

• Adult assembly is required. Tool needed for

assembly: Phillips Screwdriver (not included).

• Requires one D (LR20) alkaline battery

(not included) for soothing unit operation.

• Use from birth until child is able to sit

up unassisted.

• Product features and decorations may vary

from photographs.

¡IMPORTANTE! Leer y guardar estas

instrucciones para futura referencia, ya que

contienen información de importancia acerca

de este producto.

• Leer estas instrucciones antes de ensamblar

y usar este producto.

• Requiere montaje por un adulto. Herramienta

necesaria para el montaje: desatornillador de

cruz (no incluido).

• La unidad relajante funciona con 1 pila

alcalina D (LR20) x 1,5V (no incluida).

• Usar a partir del nacimiento y hasta que el

bebé pueda incorporarse por sí solo.

• Las características y decoración del producto

pueden variar de las mostradas.

Summary of content (12 pages)

PAGE 1
CFB88 IMPORTANT! Keep this instruction sheet for future reference, as it contains important information. • Please read these instructions before assembly and use of this product. • Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included). • Requires one D (LR20) alkaline battery (not included) for soothing unit operation. • Use from birth until child is able to sit up unassisted. • Product features and decorations may vary from photographs.
PAGE 2
Care Mantenimiento • The pad is machine washable. Wash it separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. • The frame, toy bar and toys may be wiped clean using a mild cleaning solution and damp cloth. Do not immerse the toy bar. Do not use bleach. Do not use harsh or abrasive cleaners. Rinse clean with water to remove residue. To remove the pad: • Lift to remove the pad pegs from the footrest. • Lift to remove the pad.
PAGE 3
Consumer Information Información al consumidor WARNING Fall Hazard: Babies have suffered skull fractures falling while in and from bouncers. • Use bouncer ONLY on floor. • ALWAYS use restraints. Adjust to fit snugly. • NEVER lift or carry baby in bouncer. • NEVER use toy bar as a handle. Suffocation Hazard: Babies have suffocated when bouncers tipped over on soft surfaces. • NEVER use on a bed, sofa, cushion, or other soft surface. • NEVER leave baby unattended.
PAGE 4
Parts Piezas IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad. ¡IMPORTANTE! Sacar todas las piezas del empaque e identificarlas previo al montaje. Algunas piezas pueden venir embaladas en el colchón.
PAGE 5
Assembly Montaje IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. Do not use this infant bouncer if it is damaged or broken. Do not use accessories or replacement parts other than those approved by the manufacturer. Front Cross Brace Barra transversal delantera ¡IMPORTANTE! Antes del montaje y de cada uso, revisar que el producto no tenga piezas dañadas, conexiones sueltas, piezas faltantes o bordes filosos.
PAGE 6
Assembly Montaje 4 • Insert four screws into holes in the front cross brace and footrest. Tighten the screws. TOP VIEW VISTA DE ARRIBA • Insertar cuatro tornillos en los orificios de la barra transversal delantera y el reposapiés. Apretar los tornillos. Power Switch Interruptor de encendido Seat Back Tube Tubo del respaldo 3 Footrest Reposapiés Lower Hole Orificio inferior • Slide the footrest into the front cross brace, as shown.
PAGE 7
Assembly Montaje Retainer Retenedor 8 6 • Fit each retainer through each side opening in the pad. • Insert a screw in each hole in the seat back tube. Tighten each screw. • Pull the seat back tube up to be sure it is secure. • Ajustar cada retenedor en cada orificio lateral de la almohadilla. • Insertar un tornillo en cada orificio del tubo del respaldo. Apretar los tornillos. • Jalar hacia arriba el tubo del respaldo para asegurarse que está seguro.
PAGE 8
Assembly Montaje Toy Bar Barra de juguetes 10 11 TOP VIEW VISTA DE ARRIBA Sockets Conexiones • Insert and “snap” the toy bar plugs into each retainer socket. The toy bar is designed to fit one way. If it does not seem to fit, turn it around and try again. Hint: The toy bar is removable. Press the ends of the latches and lift the toy bar. • Fasten the buckle on the rear cross brace to the buckle on the back of the seat pad.
PAGE 9
Setup and Use Preparación y uso WARNING Fall Hazard: Babies have suffered skull fractures falling while in and from bouncers. • Use bouncer ONLY on floor. • ALWAYS use restraints. Adjust to fit snugly. • NEVER lift or carry baby in bouncer. • NEVER use toy bar as a handle. Suffocation Hazard: Babies have suffocated when bouncers tipped over on soft surfaces. • NEVER use on a bed, sofa, cushion, or other soft surface. • NEVER leave baby unattended. To prevent falls and suffocation: • ALWAYS use restraints.
PAGE 10
Battery Installation – 1,5V D (LR20) Colocación de la pila Battery Safety Information In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: • Do not mix old and new batteries or batteries of different types: alkaline, standard (carbonzinc) or rechargeable (nickel-cadmium). • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use.
PAGE 11
Setup and Use Preparación y uso Restraint Pad Almohadilla de sujeción 2 1 Restraint System Sistema de sujeción • Tighten each waist belt so that the restraint system is snug against your child. Please refer to the next section for instructions to tighten the waist belts. Restraint Belts Cinturones de seguridad Securing Your Infant • Place your child in the seat. Position the restraint pad between your child’s legs. • Fasten the restraint belts to the restraint pad.
PAGE 12
Setup and Use Preparación y uso Para apretar los cinturones de seguridad: • Introducir el extremo fijo del cinturón de seguridad en la hebilla para formar un espacio A . Jalar el extremo libre del cinturón de seguridad B . Para aflojar los cinturones de seguridad: • Introducir el extremo libre del cinturón de seguridad en la hebilla para formar un espacio A . Agrandar el espacio jalando el extremo libre del cinturón hacia la hebilla.