User Manual

• When sounds or lights from this product become
faint or stop, it’s time for an adult to change
the batteries.
• Loosen the screw in the battery compartment
door. Remove the batteries and dispose properly.
• Insert two, new AA (LR6) alkaline batteries.
Hint: We recommend using alkaline batteries for
longer battery life.
• Replace the battery compartment door and
tighten the screw. Do not over-tighten.
• This toy moves best on firm carpet and
smooth surfaces.
• Not recommended for use on loose dirt or wet
surfaces. For indoor use only.
• Wipe the toy with a clean, damp cloth. Do not
immerse. This toy has no consumer serviceable
parts. Do not take apart.
• If this product begins to operate erratically, you
may need to reset the electronics. Slide the
power/volume switch off and back on.
CDJ07
Requires two AA batteries
(included). Batteries included are
for demonstration purposes only.
Battery replacement is required.
Only adults should replace batteries.
Required tool: Phillips
screwdriver (not included).
Keep these instructions for
future reference as they
contain important information.
Slide the power/volume
switch to ON with low
volume , ON with high
volume or OFF .
1,5V x 2
AA (LR6)
Slide the mode switch to:
Sit & Play! - press puppy for fun
phrases, music, sound effects and
blinking light,
Crawl After! - press puppy for crawl and
chase fun along revvin’ sound effects,
music, fun phrases and blinking light.