Healthy Care High Chair ™ Product features and decoration may vary from the photo above. Model Number: B8866 Please read these instructions before assembly and use of this product. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included). WARNING IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. p hers i f . ww w .
Warnings and Caution Consumer Information Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us, rather than return this product to the store. Usually, we can solve the problem over the telephone or send you replacement parts. Please call 01628 500303 or write to: Mattel UK Limited Mattel House Vanwall Business Park Vanwall Road Maidenhead, Berkshire SL6 4UB WARNING Prevent serious injury or death from falls or sliding out.
Parts Note: Tighten all screws with a Phillips screwdriver. Do not over-tighten the screws. Pad Toy Food Tray Seat Back Base Tray Seat Bottom Frame Hinge Rod #8 x 2 cm (3/4") Screws #10 x 2.2 cm (7/8") Black Screw 2 Seat Bottom Tubes #8 x 1.9 cm (3/4") Screws 4 Screw Retainers #10 x 2.2 cm (7/8") Black Screw - 4 #8 x 1.9 cm (3/4") Screws Frame Footrest 2 Bases #10 x 2.2 cm (7/8") Black Screws #8 x 1.9 cm (3/4") Screw - 8 SHOWN ACTUAL SIZE #10 x 2.
Assembly IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing, damaged or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. Seat Bottom Tubes Footrest Plastic Rings Seat Bottom Plastic Rings 3 • Align the holes in the plastic #8 x 1.9 cm (3/4") Screw- 4 rings and the seat bottom tubes. SHOWN ACTUAL SIZE • Insert a #8 x 1.
Assembly Frame Leg Seat Back Pin Seat Back Pin Opening Opening 7 Seat Bottom Assembly • Pull the frame leg out on each frame to open. Make sure it “clicks” into place. 5 • Turn the seat bottom assembly upright. • Fit the seat back pins into the openings in the top side of the seat bottom assembly. #10 x 2.2 cm (7/8") Black Screw SHOWN ACTUAL SIZE Hinge Hinge Rod 6 • Turn the seat assembly face down. • Insert the hinge rod through the hinge on the seat back and seat bottom, as shown.
Assembly Frame Decorated Side Seat Height Adjusters Position 4 Frame Back Legs Press Lever 9 Base Hole • While pressing the levers on the seat height adjusters, lift them to position 4 on the frame front legs, as shown. Screw Retainers 8 Base Hole Seat Assembly #10 x 2.2 cm (7/8") Black Screw - 2 SHOWN ACTUAL SIZE Screw Retainer - 2 • • • • Position a frame so that the decorated side is outward. Insert the back legs of a frame into one of the bases.
Assembly Push Seat Height Adjuster Front Leg Holes 12 Push Seat Height Adjuster Seat Bottom Tube Ends #8 x 1.9 cm (3/4") Screw - 2 SHOWN ACTUAL SIZE Screw Retainers • Push each seat height adjuster to be sure they are completely on the seat bottom tubes. • Insert a #8 x 1.9 cm (3/4") screw into each seat height adjuster and the ends of the seat bottom tube. • Tighten the screws. Base 11 #8 x 1.9 cm (3/4") Screw - 2 SHOWN ACTUAL SIZE Screw Retainer - 2 #10 x 2.
Assembly Pad Slot Crotch Belt Elastic Loops Hole Hole 15 • Insert the crotch belt through the slot in the pad. Make sure the crotch belt is not twisted. Shoulder Portion Front View Tabs Elastic Loops 14 Back and Bottom View • Lift the assembly upright. • From the front of the assembly, place the pad onto the seat. • Lift the bottom of the pad. Insert the two elastic loops on the pad through the holes in the seat bottom.
Assembly Upper Shoulder Belt Slots Shoulder Portion Bottom Slots 17 Lower Shoulder Belt Slots 18 • Lift the top of the pad. • Thread the waist/shoulder belts through the bottom slots in the back of the seat pad. • Insert the shoulder portion of the shoulder/waist belt through the slots in the pad and seat back. - Use the lower shoulder belt slots for a smaller baby. - Use the upper shoulder belt slots for a larger baby. • Fit the top of the pad over the seat back.
Assembly Securing Your Child Handle IMPORTANT! • Before each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing, damaged or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. • Place the high chair on a level, stable surface away from electrical flexes. Be sure to keep electrical flexes out of child‘s reach.
Securing Your Child Anchored End Anchored End A B B A Free End Free End Buckle 2 Tighten Loosen To tighten the waist belts: • Feed the anchored end of the waist belt up through the buckle to form a loop A . • Pull the free end of the waist belt B . • Repeat this procedure to tighten the other waist belt. To loosen the waist belts: • Feed the free end of the waist belt up through the buckle to form a loop A . • Enlarge the loop by pulling on the end of the loop toward the buckle.
Using the Trays Hint: The base tray can be adjusted for your child’s comfort two ways (see steps 7 and 8)! WARNING Prevent serious injury or death from falls or sliding out. The tray is not designed to hold the child in the chair. Base Tray Base Tray Release Bar 7 Armrest Armrest • While pushing the release bar on the front of the base tray, adjust the base tray forward or backward. Base Tray Squeeze Latch 6 Squeeze Latch • Fit the base tray onto the seat armrests.
Using the Trays Hint: The base tray can be removed two ways (see steps 9 and 10)! Food Tray Base Tray Base Tray Squeeze Latch Squeeze Latch 11 9 • Fit the food tray into the base tray, as shown. Hint: Before use, thoroughly wash all parts (the trays) that may contact food. • Squeeze one or both of the latches underneath the base tray and lift. Base Tray Release Bar 10 • While pushing the release bar on the front of the base tray, pull the tray base towards you and remove.
Adjusting the Seat Hint: Adjust the seat angle to any of three positions: Upright, Semi-Recline or Recline. WARNING Prevent serious injury or death from falls or sliding out. It is recommended that the high chair be used in the upright position only by children capable of sitting upright unassisted.
Storage Care • The pad, toy, frame and base tray may be wiped clean using a mild cleaning solution and a damp cloth. Do not immerse the base tray. • The food trays are dishwasher safe. Simply remove the food tray from the base tray and place in your dishwasher. IMPORTANT! Never use this product without the restraint system. Replace the waist/shoulder belts and crotch belt. Base Tray Hole Peg 14 • Fit the holes on the base tray latches onto the pegs on the back of the high chair frame.
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. ©2003 Mattel, Inc. All Rights Reserved. ® and TM designate U.S. trademarks of Mattel, Inc.