Discovery Airport ™ Model Number 77831 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tool required for battery installation: Phillips screwdriver (not included). Requires four “AA” (LR6) alkaline batteries (not included). i bl e … Discover what ’s poss ™ .f is www e p r ic her- .
For Best Results Parts t ee 3F t 3 Fee t 3 Fee t ee 3F Terminal Press Firmly t6 leas t a l Rol inches • Roll vehicle in a straight line, within 3 feet of the airport terminal. • Roll the vehicle at least 6 inches. • Be sure your child plays with the toy in a quiet room (free from background noise). • Press firmly when rolling, so you can hear the “clicking” sound. (The clicking sound activates the sound effects). • Roll the vehicle at a constant speed (not too slow or too fast).
Parts Parts Bridge Bridge Base Terminal Straight Track Ramp with Fuel Pump Terminal Base Umbrella Ramp Windsock Binocular Viewer Radar Dish Luggage Helicopter Helicopter Lift Luggage Trailer Luggage Car Taxi Airplane Parts not shown: 3 Figures.
Battery Installation Parts Terminal Base Battery Compartment Door Battery Tips: 1.5V x 4 “AA” (LR6) Shown Actual Size • Locate the battery compartment door on the bottom of the airport base. • Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. • Insert four, "AA" (LR6) alkaline batteries, as indicated inside the battery compartment. • Replace the battery compartment door and tighten the screw with a Phillips screwdriver.
Assembly 1 Terminal Terminal Base • Position the terminal base on a flat surface. Insert and "snap" the tabs on the bottom of the terminal into the slots in the terminal base as shown. Press firmly on the building to make sure all five tabs have snapped in place. • Pull up on the terminal to be sure it is secure. 2 Ramp with fuel pump Ramp Bridge Base • Place the bridge base on a flat surface. Insert and "snap" the tabs on the ramp into the slots in the bridge base as shown.
Assembly 3 Bridge • Insert and "snap" the tabs on the ends of the bridge into the slots in the ramps, as shown. 4 Ramp Assembly Straight Track • Insert and "snap" the tabs on the end of each ramp into the slots in the straight track as shown. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. ©2002 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Assembly 5 Binocular Viewer Radar Dish Windsock Umbrella Table • Insert and "snap" the peg on the bottom of the radar dish into one of the two large holes on the roof of the terminal. • Insert and "snap" the peg on the bottom of the binocular viewer into the other large hole on the roof of the terminal. • The windsock can be inserted and removed from any of the smaller holes on the roof of the terminal. • The umbrella can be inserted and removed from the hole in the table on the terminal base.
Label Application Proper label application will help to keep the labels looking their best! • Wash your hands before applying the labels. • Make sure the areas where the labels will be applied are clean and dry. Wipe this product with a clean, soft, dry cloth to remove any dust or oils. • For best results, do not attempt to apply a label more than once. • Apply the labels as shown in the illustrations.
Airport Fun with Lights and Sound Effects! X Button Power Switch • Locate the power switch on the bottom of the toy. • Slide the switch to the on position. The lights flash and you’ll hear a musical "fanfare". The toy is ready to recognize the vehicles when rolled. • If your child does not actively play with this toy for a few minutes, the toy will play the same fanfare and go to sleep. Sound effects and lights will not work. • To "wake up" the toy, press the "X" button on the top of the airport building.
Roll ‘n Recognize Roll any vehicle within 3 feet of the airport. The airport recognizes the vehicle and responds with a sound effect and lights. Rotate the helicopter propeller for lights and sound effects. Turn the baggage carousel to hear a tune. Raise and lower the toll gate for flashing lights and phrases. Hint: Teach your child how to roll the vehicles at a consistent speed and in a straight line to activate the sound effects.
Care • Wipe the toy with a clean cloth dampened with a mild soap and water solution. • Do not immerse the toy. FCC Note (United States Only) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Questions? We'd like to hear from you! Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to: Fisher-Price® Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052. For other countries, outside the United States: Canada: call 1-800-567-7724, or write to: Mattel Canada Inc, 6155 Freemont Blvd.,Mississauga, Ontario L5R 3W2.