Fisher-Price’ Vibrating ~~ Monitor Model Number: 71599 For proper setup and use, please read these instructions and keep for future reference, Please keep this instruction sheet for future reference, as it contains important information. . Includes two AC adapters to power transmitter and receiver (plugs into ; standard Household outlets ~120V AC). Receiver also runs on battery power (9V alkaline battery not included).
IMPORTANT! /A\ CAUTION This product cannot replace responsible adult supervision. = This product is not intended to be used as a medical monitor and its use should not replace adult supervision, = Test sound reception of receiver before first-time use and whenever you change location of transmitter, « To prevent entanglement: Never place transmitter in a rib or playpen. Keep transmitter and receiver put of baby’s reach. Never use extension cords with the AC adapters.
elation (optional) Receiver Battery Inst Frustration to come AV (GREELEY) Compartment Door SHOWN ACTUAL SIZE «Locate battery compartment door on bottom of receiver, + Push finger tab on battery compartment door to open battery comparative door. « Bap terminals of afresh, OV alkaline battery Into receiver connectors. » Close battery compartment door, Battery Tips + Remove the battery during long periods of non-use. Always remove an exhausted battery from the product.
Setup & Use IMPORTANT! Test sound conception of this monitor before first time use and whenever you change location of transmitter (see page 4). 4 Set transmitter channel switch to same channel as receiver, 2 Place transmitter in same room with child. Point microphone directly toward crib or play area. 3 Unwrap and fully extend AC adapter cord for best transmission. Insert AC adapter jack into transmitter socket and plug into wall outlet.
i bastion Testing Sound Ry Test transmitter transmission and receiver reception each time you change location of use (receiver or transmitter or both). Indicator / Power 1 J Switch empowerment Dial Power Power indicator Place transmitter in room in which Place receiver in room in which you intend to use it. Rotate transmitter you intend to use it. Rotate the power switch to turn power on. Power power/volume dial to turn power indicator its. Turret a radio, on. Power indicator lights.