User Manual

ManualsBrandsFisher-Price ManualsOther Fisher-Price Infant ToysSlumbertime Soother™ with Remote Control

Slumbertime

Soother

with Remote Control

Model Number 71249

CAUTION

• Please keep these instructions for future reference.

• Requires four size “C” (LR14) alkaline batteries in soother

and two size “AA” (LR6) alkaline batteries in remote.

(Batteries not included.)

• Tool required tor battery installation: Phillips screwdriver.

• Batteries must be installed by an adult.

• Always attach all provided fasteners

(strings, straps, clamps, etc.) tightly to

a crib or playpen according to the

instructions. Check frequently.

• Do not add additional strings or straps

to attach to crib or playpen.

Summary of content (10 pages)

PAGE 1
® Slumbertime Soother with Remote Control Model Number 71249 • Please keep these instructions for future reference. • Requires four size “C” (LR14) alkaline batteries in soother and two size “AA” (LR6) alkaline batteries in remote. (Batteries not included.) • Tool required tor battery installation: Phillips screwdriver. • Batteries must be installed by an adult. CAUTION • Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib or playpen according to the instructions.
PAGE 2
Soother Features 1 2 ® 4 6 Front 11 3 5 9 8 10 10 7 Rear 7 1 Carry Handle.....Sturdy carry handle allows you or your child to take Slumbertime Soother wherever you go! 2 Receiver Dome.....Receiver blinks when it is ready to accept a 3 4 5 6 7 8 9 10 11 signal from the remote. Dome rotates to align with the transmitter on the remote. Mode Switch....
PAGE 3
Remote Features 3 2 4 1 5 ® Front 4 Rear 1 Button...Press to activate Slumbertime Soother when the 2 3 4 5 receiver on the soother is blinking. Please note: If the receiver on the soother is not blinking, the soother is not ready to accept a signal from the remote. LED Signal Indicator...Lights when the button is pressed to let you know the remote has transmitted a signal. Transmitter Window....Transmitter sends a signal to the receiver on the soother. Handle....
PAGE 4
Battery Installation Soother Remote Battery Compartment Soother • Locate the battery compartment door on the back of the soother. • Unfasten the screws in the battery compartment door with a Phillips screwdriver. • Open the battery compartment door and insert four size “C” (LR14) alkaline batteries in the correct polarity as indicated in the battery compartment. • Close the battery compartment door and tighten the screws with a Phillips screwdriver. Do not over-tighten.
PAGE 5
Battery Tips • Do not mix old and new batteries. • Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium ) batteries. • Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Battery leakage and corrosion can damage the product. • Never short circuit the battery terminals. • Non-rechargeable batteries are not to be recharged.
PAGE 6
Receiver Dome Remote Pocket Crib Rail Peg Peg Fastener Cord Fastener Strap • Position the soother against the crib rail with the front of the soother facing the interior of the crib. • Wrap the fastener straps over the top of the crib rail. • Fit a slot in each strap over the peg on the back of the soother. Make sure the receiver dome on the soother is above the crib rail so that the crib rail will not obstruct remote activation.
PAGE 7
Slumber Time! Important Notes: • In the unlikely event that use of the Slumbertime Soother remote interferes with normal use of other remote controlled equipment, such as televisions and stereos, or use of other electric or battery powered appliances interfere with operation of Slumbertime Soother, do not use both appliances at the same time. • For best performance between the soother and the remote, avoid using Slumbertime Soother with Remote Control in areas of bright light.
PAGE 8
Important Note: When using the remote, make sure that the arrow on the soother’s receiver dome is pointing towards the transmitter on the remote. For best results, the path between the transmitter on the remote and the receiver on the soother should be in direct line of sight and free of obstacles. Rotate the receiver dome so that the arrow on the dome points to the area from which you’re most likely to use the remote.
PAGE 9
Sound Effects Mode Choose any one of three sound effects: babbling brook, chirping crickets or tweeting birds. The sound effect will play for approximately 10 minutes. There is no light display in the Sound Effects mode. • Press the button on the soother or the remote to play the first sound effect. To skip to a different sound effect, press the button to stop the first sound effect. Press the button again to start the second sound effect. Keep pressing the button to cycle through the three sound effects.
PAGE 10
Two (2)Year Limited Warranty Fisher-Price, Inc., 636 Girard Avenue, East Aurora, New York 14052, warrants that Slumbertime Soother with Remote Control is free from all defects in material and workmanship when used under normal conditions for a period of two (2) years from the date of purchase. Should the product fail to perform properly, we will repair or replace it at our option, free of charge.