Car Seat User Manual

ManualsBrandsFisher-Price ManualsCar Seat3-IN-1 HIGH CHAIR TO BOOSTER P5369

3-in-1 High Chair to Booster

™

Model Number P5369 and P6028

Installation Instructions

FALL HAZARD

•Theseatcantipbackwardsandfallfromthehigh

chairframeifyouunlatchtheboosterreleasewith

yourchildinit.DO NOTusethisproductuntilyou

haveinstalledthebracketsonthehighchairframe.

•Theseatbackcandetachfromtheseatbottomif

itisnotcompletelysnappedinplace.DO NOTuse

thisproductuntilyouhaveproperlyinstalledtheseat

backtotheseatbottomandre-installedtherestraint

systemproperlyontheseat.

WARNING

Summary of content (8 pages)

PAGE 1
Installation Instructions 3-in-1 High Chair to Booster™ Model Number P5369 and P6028 WARNING FALL HAZARD • The seat can tip backwards and fall from the high chair frame if you unlatch the booster release with your child in it. DO NOT use this product until you have installed the brackets on the high chair frame. • The seat back can detach from the seat bottom if it is not completely snapped in place.
PAGE 2
Kit Parts Tool needed for installation: Phillips Screwdriver (not included). CAUTION WARNING This kit contains small parts in it's unassembled state. Adult assembly is required. Installation Instructions 3-in-1 High Chair to Booster™ Model Number P5369 and P6028 WARNING FALL HAZARD • The seat can tip backwards and fall from the high chair frame if you unlatch the booster release with your child in it. DO NOT use this product until you have installed the brackets on the high chair frame.
PAGE 3
Bracket Installation Instructions B A Booster Seat High Chair Frame Latch 1 2 • REMOVE your child from the seat. • While sliding the switch A , pull the latch toward you B . • Lift the seat off of the high chair frame. • Set the seat aside for seat back installation. Footrest Seat Support Seat Support B A Remove These Screws 3 4 BOTTOM VIEW • Turn the high chair frame over. Position it so that the footrest is facing away from you.
PAGE 4
Bracket Installation Instructions Seat Support Tube Seat Support Seat Support B A #8 x 3/4" (1,9 cm) Screw Left Bracket 5 6 • Push to align the hole in the left bracket with the hole in the seat support. • Insert a #8 x 3/4" (1,9 cm) screw (provided in this kit) through the left bracket and into the seat support. Tighten the screw with a Phillips screwdriver. Do not over-tighten. Right Bracket • First, fit the slot on the right bracket (labeled 2) onto the seat support tube closest to you A .
PAGE 5
Seat Back Installation Instructions BACK VIEW LIFT "T" Ends of Shoulder Straps Shoulder Straps PULL TAB 1 2 • Pull the tab on the seat back. Lift to remove the seat back from the seat. • From behind the seat, push the "T" ends of the shoulder straps through the slots in the seat back. BACK VIEW Seat Back Pad Pad Straps Seat Back 3 4 • From behind the seat back, unfasten the pad straps. • Remove the seat back pad from the seat back. • Set the seat back pad aside.
PAGE 6
Seat Back Installation Instructions BACK VIEW BACK VIEW Upper Shoulder Belt Slots (Larger Baby) Lower Shoulder Belt Slots (Smaller Baby) Seat Back Pad New Seat Back Pad Straps Shoulder Belt "T" Ends Small Slots 5 6 Small Slots Smaller Baby • Insert the "T" ends of the shoulder belts through the lower slots in the pad and seat back. Pull on the shoulder belts to be sure they are secure. Larger Baby • Insert the "T" ends of the shoulder belts through the upper slots in the pad and seat back.
PAGE 7
Consumer Information United States If you have further questions regarding the installation of the brackets or seat back, please call Fisher-Price® Consumer Relations at 1-888-683-6224, 9 AM – 7 PM (EST) Monday through Friday and 11 AM – 5 PM (EST) Saturday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to Fisher-Price® Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052. Great Britain Vanwall Business Park, Maidenhead SL6 4UB.