DISHWASHER CLASSIC MODELS DW60UC2X, DW60UC6X, DW60UC6B DESIGNER MODELS DW60UD6X, DW60UD6B CONTEMPORARY MODELS DW60UZ6B INSTALLATION GUIDE NZ AU
SAFETY AND WARNINGS ! ! IMPORTANT SAFETY INSTRUCTIONS WARNING! Electrical shock hazard Before installing the dishwasher, remove the house fuse or open the circuit breaker. This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-earthing conductor and an earthing plug.
PARTS SUPPLIED TECHNICAL DATA Technical data Check the electrical data on the rating label (located on the left-hand side of the dishwasher’s stainless steel inner door). Should the data on the rating label be different to those specified below, consider those on the rating label as correct. Installation guide, template and user instructions Inlet hose (1) Brackets for toe kick (2) Plastic spacers (2) Drain hose support (1) Ø3.
PRODUCT DIMENSIONS – DW60UC PRODUCT DIMENSIONS DW60UC MODELS MM f h A Overall height of product* 820 - 880 B Overall width of product** 598 C Overall depth of product 570 D Height of door 711 E Width of door 590 F Depth of door 46 G Height from floor to bottom of door i j k E PLAN ISOMETRIC b C H Depth of open door 100 - 160 586 I Width of toe kick panel z Custom panel z Pre-finished panel 596 - 605 595 J Height of toe kick panel*** z Custom panel 80 - 165 z Pre-finished toe
PRODUCT DIMENSIONS – DW60UD PRODUCT DIMENSIONS DW60UD MODELS MM f A Overall height of product* 820 - 880 B Overall width of product** 598 C Overall depth of product 570 D Height of door 714 E Width of door 595 F Depth of outer door*** h G Height from floor to bottom of door H Depth of open door i j z Custom panel z Pre-finished panel e ISOMETRIC B 100 - 160 583 I Width of toe kick panel k PLAN 18 596 - 605 595 J Height of toe kick panel**** z Custom panel 80 - 165 z Pre-fini
PRODUCT DIMENSIONS – DW60UZ PRODUCT DIMENSIONS DW60UZ MODELS MM f A Overall height of product* 820 - 880 B Overall width of product** 598 C Overall depth of product 572 D Height of door 717 E Width of door 595 F Depth of outer door h G Height from floor to bottom of door i j k e PLAN ISOMETRIC b C H Depth of open door 20 100 - 160 582 I Width of toe kick panel z Custom panel z Pre-finished panel 596 - 605 595 J Height of toe kick panel*** z Custom panel 80 - 165 z Pre-finished
CABINETRY DIMENSIONS CLEARANCES A B C d A e f PLAN CABINETRY DIMENSIONS B PROFILE MM A Inside width of cavity 600 - 610 B Inside depth of cavity min.
CAVITY PREPARATION IMPORTANT! To prevent possible steam damage to the cabinetry, ensure that any bare wood surrounding the dishwasher is sealed with an oil-based paint or moisture-proof polyurethane. 1 Apply moisture protection tape IMPORTANT! Apply moisture protection tape to the underside of the benchtop. The power outlet must be located in a cabinet adjacent to the dishwasher cavity. z 4 2 Back foot of the dishwasher can be adjusted by using a hex key.
TOE KICK INSTALLATION OPTIONS SEPARATE CUSTOM PANEL CONTINUOUS CUSTOM PANEL 237 Note door overhang and swing range relative to height and depth of toe kick panel. As the panel is continuous, cutting back panel is likely to be necessary to ensure seamless integration. A Mark out the bracket location on your panel. To establish the height in which the bracket will be fixed, measure the distance from the floor to the lowest hole of the bracket (A).
TOE KICK INSTALLATION OPTIONS PRE-FINISHED TOE KICK Distance between bottom of door and floor (mm) Cut location 103 - 98 9 108 - 103 8 9 113 - 108 7 8 118 - 113 6 123 - 118 5 128 - 123 4 4 133 - 128 3 3 138 - 133 2 143 - 138 1 7 6 5 2 1 143+ N/A Toe kick PROFILE VIEW Measure the distance between the floor and the base of the door to establish the toe kick height. Refer to the above guide and mark out the cut location.
SECURING PRODUCT cut path example As you push product in, pull through hoses and cord, ensuring they don’t get kinked or twisted. Plastic spacers can be cut to size then taped to the sides of the dishwasher to improve overall stability. Center appliance IMPORTANT! Ensure top of door is installed flush with surrounding cabinetry A floor protection SECURE TO THE CABINETRY ON THE SIDES Secure product to cabinetry through on both sides of the chassis using Ø4 x 25mm screws.
PLUMBING AND DRAINAGE OPTIONS Ø 38 MM STANDPIPE DRAIN HOSE JOINER ONTO SINK TRAP/WASTE TEE Installer to provide drain hose joiner to suit min. 15mm waste tee. 1 2 1 2 1 3 1 min. radius 200 mm min. radius 200 mm IMPORTANT! Do not connect the drain hoses to a Waste Disposal Unit, as this type of connection may lead to a blockage in the drain hoses. IMPORTANT! Ensure that drain hose is installed as close to the underside of the benchtop as possible.
CONNECT INLET HOSE TO COLD WATER 2 2 2 Plumbing — Water inlet connection 3 IMPORTANT! z 1 z 3 Ensure the appliance is connected to the water main using the supplied new water inlet hose. Do not use old hoses. Do not shorten the inlet hose. 1 1 1 1 Follow the water connection requirements. We recommend a cold water connection for best performance and energy efficiency. The incoming water temperature should not exceed 25oC. Water pressure: z Take note of the permitted water pressure extremes.
TROUBLESHOOTING Excessive water remaining above the filter plate, after the rinse cycle (This can be displayed as an A20 fault) z Check for a kinked drain hose, blocked waste connection, highloop not properly installed, drain hose not routed correctly or spray arms not in place. No water supply (This is displayed as an A10 fault) z Check water is connected and turned on. The dishwasher is beeping continuously z There is a fault.
FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER Check all parts are installed. Check that the door opens and closes freely without resistance to adjacent cabinetry. Ensure that all panels and parts thereof are secure and final electrical tests have been conducted in accordance with local electrical regulations. Check that the electrical outlet is accessible and located in an adjacent cupboard. Check that the dishwasher is level. If necessary, adjust the levelling feet slightly.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2020. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.